[Gluster-users] GlusterFS with iSCSI and PaceMaker

Patrick Irvine
2015-04-21T05:02:56Z

Hi Justin,

I have been running gluster on ISCSI for a few years now using pacemaker
to control it.  My ISCSI Targets are Qnap servers, and I am using the
built in open-iscsi linux packages.  My client servers are running
gentoo linux.  In my setup I am using 2 ISCSI targets that get mounted
into my client servers, with gluster on top in a simple mirror setup.  I
then mount my gluster instance into each of my servers.  I am not using
Active/Standby since gluster allows both "bricks" to be active at the
same time.

I'm not a linux guru,  I have a setup that mostly works for me, but if I
can help let me know.

Pat.

On 20/04/2015 7:14 PM, Justin Chin-You wrote:
> Hi All,
>
> I'm new to Gluster and I'm trying to work through some test
> configurations.
>
> What I am trying to do is use Gluster to create a mirrored and
> scalable storage array. My plan is once I setup Gluster is to then
> export the GlusterFS via an iSCSI interface which will have an
> Active/Standby failover managed via Pacemaker.
>
> I am curious if anyone has tried anything similar and if you have what
> iSCSI driver are you using.
>
> Thanks,
>
> Justin
>
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://www.gluster.org/mailman/listinfo/gluster-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://www.gluster.org/pipermail/gluster-users/attachments/20150420/f6fba931/attachment.html>