Hi, I'm attempting to rebuild CentOS 2.1 ISOs with the latest kernel (to attempt installation on some newer hardware with SATA drives). It seems that the original build environment used different version of anaconda than shipped with CentOS 2.1 (7.2-77_ELAS vs 7.2.32AS). I found SRPM of 7.2.32AS, however I'm wondering if there is binary package also? BTW, any hints on the things that might be problematic with rebuilding the ISOs with newer kernel are more than welcome ;-) Thanks -- NOTICE: If you are not intended recipient, you are hereby notified that by reading this message you agreed not to disturb frogs during mating season. For more info, visit http://www.8-P.ca/
CentOS 2.1 no longer fits on 2 CDs. Rebuilding will be a pain. You are correct about the anaconda versions. You should be able to build the source into a binary but I can send you my built copy if you want. John (the CentOS-2 maintainer). Aleksandar Milivojevic wrote:> Hi, > > I'm attempting to rebuild CentOS 2.1 ISOs with the latest kernel (to > attempt installation on some newer hardware with SATA drives). > > It seems that the original build environment used different version of > anaconda than shipped with CentOS 2.1 (7.2-77_ELAS vs 7.2.32AS). I > found SRPM of 7.2.32AS, however I'm wondering if there is binary > package also? > > BTW, any hints on the things that might be problematic with rebuilding > the ISOs with newer kernel are more than welcome ;-) > > Thanks >-- John Newbigin Computer Systems Officer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin