[asterisk-users] Windstream SIP Trunk settings

Mark Wiater
Mon, 22 Feb 2016 14:06:31 -0000

In my case, username is the BTN. I also set the fromdomain to be the sbc
that I'm registering with. Externip might help also?

[paetec]
host=10.250.0.5
username=btn
fromdomain=10.250.0.5
dtmfmode=rfc2833
externip=10.255.0.2

I've used these settings on both registering and non-registering trunks,
connecting to both the Broadworks and Plexus platforms in Windstream.
Though all of my asterisk versions have been 1.8.x

Mark

On 2/22/2016 8:20 AM, James Cass wrote:
> Does anyone on this list use Windstream as a SIP trunk provider?
>
> If so, would you mind sharing your peer settings?
>
> I'm using asterisk 13.7.2 and can't seem to get the inbound working
> correctly (using registration).  Outbound is fine, but they are seeing
> an authentication error on their end.
>
> Here are my inbound peer settings:
>
> username=<accountnumber>
> secret=<secret>
> host=<host address>
> type=peer
> fromuser=<accountnumber>
> context=from-trunk
> dtmfmode=auto
> canreinvite=no
> qualify=yes
> insecure=port,invite
>
> register string:   <accountnumber>:<secret>@<host
address>:5060
>
> Thanks in advance,
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20160222/6afb81cf/attachment.html>