asterisk users - Dec 2015 - host parameter equivalent in pjsip.conf

Hi,

 

I'm trying to port our configuration form sip to pjsip channel and have
following issue.

 

Sip.conf has a host parameter that sets the RURI to a given value. This
functionality is needed in some of our scenarios where we need to send
requests to specific IP address with specific domain in RURI. 

 

I did not found an equivalent to the host parameter in pjsip configuration.
Did I miss something?

 

All I could come with is to get the Route header set to the needed value,
but that does not help us in our scenarios. Below are relevant config
settings and resulting SIP REGISTER Request.

 

sip.conf:

 

host=test.com

outboundproxy=tcp://1.2.3.4

fromuser=+12345678

fromdomain=test.com

 

REGISTER sip:test.com SIP/2.0

From: <sip:+12345678 at test.com>;tag=as5152122a

To: <sip:+12345678 at test.com>

Contact: <sip:+12345678 at 4.3.2.1:5071;transport=TCP>

User-Agent: Asterisk PBX 13.6.0

 

pjsip.conf:

 

client_uri = sip:+12345678 at test.com

server_uri = sip:test.com

outbound_proxy=sip:1.2.3.4\;transport=tcp

 

REGISTER  <sip:1.2.3.4;transport=tcp> sip:1.2.3.4;transport=tcp SIP/2.0

From: <sip:+12345678 at test.com>;tag=f47f3ed2-0975-4ff0-bd3b-bd5c38e594c4

To: <sip:+12345678 at test.com>

Contact: <sip:+12345678 at 4.3.2.1:60938>

Route: <sip:test.com>

User-Agent: Asterisk PBX 13.6.0

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20151208/313c2597/attachment.html>

On Tue, Dec 8, 2015 at 10:29 AM, xaled <xaled at web.de> wrote:
> Hi,
>
>
>
> I?m trying to port our configuration form sip to pjsip channel and have
> following issue.
>
>
>
> Sip.conf has a host parameter that sets the RURI to a given value. This
> functionality is needed in some of our scenarios where we need to send
> requests to specific IP address with specific domain in RURI.
>
>
>
> I did not found an equivalent to the host parameter in pjsip
> configuration. Did I miss something?
>
>
>
> All I could come with is to get the Route header set to the needed value,
> but that does not help us in our scenarios. Below are relevant config
> settings and resulting SIP REGISTER Request.
>
>
>
> sip.conf:
>
>
>
> host=test.com
>
> outboundproxy=tcp://1.2.3.4
>
> fromuser=+12345678
>
> fromdomain=test.com
>
>
>
> REGISTER sip:test.com SIP/2.0
>
> From: <sip:+12345678 at test.com>;tag=as5152122a
>
> To: <sip:+12345678 at test.com>
>
> Contact: <sip:+12345678 at 4.3.2.1:5071;transport=TCP>
>
> User-Agent: Asterisk PBX 13.6.0
>
>
>
> pjsip.conf:
>
>
>
> client_uri = sip:+12345678 at test.com
>
> server_uri = sip:test.com
>
> outbound_proxy=sip:1.2.3.4\;transport=tcp
>
>
>
> REGISTER sip:1.2.3.4;transport=tcp SIP/2.0
>
> From: <sip:+12345678 at
test.com>;tag=f47f3ed2-0975-4ff0-bd3b-bd5c38e594c4
>
> To: <sip:+12345678 at test.com>
>
> Contact: <sip:+12345678 at 4.3.2.1:60938>
>
> Route: <sip:test.com>
>
> User-Agent: Asterisk PBX 13.6.0
>
>
In order to preserve the request URI, you'll need to specify loose routing
on the SIP URI for the outbound proxy:

outbound_proxy=sip:1.2.3.4\;transport=tcp\;lr

-- 
Matthew Jordan
Digium, Inc. | Director of Technology
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: http://digium.com & http://asterisk.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20151208/5cae2773/attachment.html>

It works, thanks a lot! 

Maybe you could add this example to the sample pjsip.conf for others to see.

 
>In order to preserve the request URI, you'll need to specify loose
routing on the SIP URI for the outbound proxy:
>outbound_proxy=sip:1.2.3.4\;transport=tcp\;lr 




-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20151208/f7dcb9ca/attachment.html>