asterisk users - Oct 2007 - zaptel upgrade trouble (1.2.10 -> 1.2.20.1)

Hello!

I have been trying upgrade zaptel from 1.2.10 to 1.2.20.1. I am using
asterisk 1.2.10 with one TDM2400P (all 6 module in use) and one
TE405P. When I upgrade to 1.2.20.1 the order of cards mess up and
therefore zaptel.conf is unusable and gives error. Why is it happen
and what do I need to change in zaptel.conf?

now zaptel.conf is:
loadzone=hu
defaultzone=hu
# GSM
fxsks=1-4
# FAX
fxoks=5-8
# EXT
fxoks=9-24
# PRI
span=2,1,0,ccs,hdb3,crc4
bchan=25-39
dchan=40
bchan=41-55

zttool shows that my TDM is the first device and T4XXP is from second
to fifth. Nice. After zaptel upgrade TDM is on the fifth position. And
channels in zaptel.conf were messed up of course because 1-24 is not
for TDM.

bye,
a

On Tue, Oct 02, 2007 at 10:06:06AM +0200, Artifex Maximus
wrote:
> Hello!
> 
> I have been trying upgrade zaptel from 1.2.10 to 1.2.20.1. I am using
> asterisk 1.2.10 with one TDM2400P (all 6 module in use) and one
> TE405P. When I upgrade to 1.2.20.1 the order of cards mess up and
> therefore zaptel.conf is unusable and gives error. Why is it happen
> and what do I need to change in zaptel.conf?
> 
> now zaptel.conf is:
> loadzone=hu
> defaultzone=hu
> # GSM
> fxsks=1-4
> # FAX
> fxoks=5-8
> # EXT
> fxoks=9-24
> # PRI
> span=2,1,0,ccs,hdb3,crc4
> bchan=25-39
> dchan=40
> bchan=41-55
> 
> zttool shows that my TDM is the first device and T4XXP is from second
> to fifth. Nice. After zaptel upgrade TDM is on the fifth position. And
> channels in zaptel.conf were messed up of course because 1-24 is not
> for TDM.
Was there also a change in the kernel ? 

In the value of MODULES in /etc/{sysconfig,default}/zaptel ?

-- 
               Tzafrir Cohen       
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir