[Asterisk-Users] RE: Euro-ISDN

Armin Schindler
2006-02-01T02:32:48Z

On Wed, 1 Feb 2006, Aldo Bergamini wrote:
> >> What cards do support operation of an ISDN phone set? (I imagine
there
> >> will be something similar to the FXS-FXO stuff of the analog world
in
> >> the ISDN land).
> >
> >For that you need cards operated in NT-mode. The driver / protocol must
> >support this, but the card too.
> >HFC-S cards do as far as I know (I don't know if all do).
>
> Fine; I looked into the capi.conf file, but (my lack of knowledge!) I
> did not understand if there is any setting to tell the driver to operate
> a card in NT-mode.

chan_capi does not set the NT-mode. Your cards driver need to do that.
E.g. for Eicon DIVA Server cards, you just set the '-x' option with
divactrl
or set NT-mode in the config wizard.
chan_capi does not (need) to know anything about what protocol the card is
doing. CAPI is independent here.
Anyway, if the card is set to NT mode, you should specify ntmode=yes
in the capi.conf to tell chan_capi to handle the progress better
(get progress tones).

> So, does the newest (which I have anyways to download for the next
> release of our pbx) capi driver support NT mode?

capi driver? I think you mean chan_capi? Yes it does support
TE and NT mode, as well as DSS1, 1TR6, JAPAN, NI1, QSIG, 5ESS, and a lot
more protocols.
The card and the cards driver need to support/provide this.

Armin