[Asterisk-Users] PBX replacement

igil@europesip.com
Thu, 21 Apr 2005 07:36:38 -0000

Hello,

Actualy I have got a PBX conected to a BRI port on a Cisco Router witch
route the calls. The router is using h323 with the other end.

How could I replace the actual PBX and pass all the calls to the router,
as now works.

I tryed connecting an asterisk CAPI port against the same BRI Cisco port,
but I can not make any calls, I get the following error from asterisk.

Connected to Asterisk 1.0.3 currently running on Asterisk-OKM (pid = 991)
Verbosity is atleast 3
    -- Remote UNIX connection
    -- Executing ChanIsAvail("SIP/112-8c2e",
"CAPI/916741111&CAPI/916741111&CAPI/914850127&CAPI/914850127")
in new
stack
    -- data = 916741111
    -- capi request omsn = 916741111
  == found capi with omsn = 916741111
    -- Executing SetVar("SIP/112-8c2e", "CANAL=916741111")
in new stack
    -- Executing Dial("SIP/112-8c2e",
"CAPI/916741111:263|70|Tt") in new
stack
    -- data = 916741111:263
    -- capi request omsn = 916741111
  == found capi with omsn = 916741111
  == CAPI Call CAPI[contr2/916741111]/59     -- Called 916741111:263
    -- CONNECT_CONF ID=001 #0x0026 LEN=0014
  Controller/PLCI/NCCI            = 0x102
  Info                            = 0x0

  == received CONNECT_CONF PLCI = 0x102 INFO = 0
    -- DISCONNECT_IND ID=001 #0x001b LEN=0014
  Controller/PLCI/NCCI            = 0x102
  Reason                          = 0x3301

  == DISCONNECT_IND PLCI=0x102 REASON=0x3301
  == No one is available to answer at this time

Any help will be welcomed.

Thanks.

Ismael.
-------------- next part --------------
An HTML attachment was scrubbed...