[Asterisk-Users] SNOM 190 "Dial-Plan String" Settings

James Bean
Mon, 18 Oct 2004 02:12:41 -0000

I don't have any soft phones setup, the SNOM receives the calls no problems
when the SNOM tries to dial out it says "Not Found:" on the phone
display, on the asterisk console with "asterisk -vvvvvgc" when I try
to dialout I only get

chan_sip.c:7561 handle_request: Unknown SIP command 'PUBLISH' from
'192.168.69.250'

Which I am told is normal as asterisk doesn't support the Publish
command....

I have an analog phone plugged into the TDM400P in another port and it dials out
without issue.

Thanks for the response this has been bugging the crap out of me, any help would
be appreciated.

My /etc/extensions.conf is as follows.

[pstn]

exten => s,1,Wait(2)
exten => s,2,NoOp(Comment Only: Call from ${CALLERIDNUM}) ; Just put a
comment in the CLI for info.
exten => s,3,Dial(SIP/snom-james,45,t)  ;Dial James SNOM Phone for incoming
calls
exten => s,4,Hangup

[internal]

exten => i,1,Playback(invalid)
exten => i,2,Hangup
exten => t,1,Hangup

exten => 099,1,Echo     ;simple echo test when you dial 099 on your phone

include => outgoing
include => voip
include => sip

[outgoing]

exten => _9X.,1,Dial(Zap/g1/${EXTEN:1})
exten => _9X.,2,Congestion()
exten => _9X.,3,Hangup

[voip]

exten => _1XX,1,Dial(OH323/${EXTEN}@192.168.254.250/${CALLERIDNUM})     ; 1xx
extension to Salisbury
exten => _2XX,1,Dial(OH323/${EXTEN}@192.168.20.250/${CALLERIDNUM})      ; 2xx
extension to Marcoola
exten => 610,1,Dial(OH323/${EXTEN}@192.168.30.250/${CALLERIDNUM})  ; 610 to
Jindalee
exten => 620,1,Dial(OH323/${EXTEN}@192.168.40.250/${CALLERIDNUM})  ; 620 to
Batteryhill

[sip]

exten => 690,1,Dial(SIP/snom-james,30,tr)
exten => 690,2,voicemail2,u900
exten => 690,102,voicemail2,b900

exten => 691,1,Dial(SIP/bt-karen,30,tr)
exten => 691,2,voicemail2,u901
exten => 691,102,voicemail,b901

My sip.conf is as follows

[general]
port = 5060
bindaddr = 192.168.69.1
context = sip
disallow = gsm
allow = alaw
disallow = ulaw
nat=disable
srvlookup=no
localnet=192.168.69.0/255.255.255.0
subscribecontext = sip

[snom-james]
type=friend
secret=<password deleted>
host=dynamic
callerid="James" <690>
defaultip=192.168.69.250
dtmfmode=rfc2833
mailbox=900

[bt-karen]
type=friend
secret=<password deleted>
host=dynamic
callerid="Karen" <691>
defaultip=192.168.69.251
dtmfmode=rfc2833
mailbox=901

---------------------------------------

Although when I first start asterisk up I always get this 1 error that I am not
sure about.

chan_sip.c:681 retrans_pkt: Maximum retries exceeded on call
3d1b58ba507ed7ab2eb141f241b71efb@192.168.69.1 for seqno 102 (Non-critical
Request)

James

>Hello James,
>
>There is nothing special with the Snom phones. The empty dialplan string
>is normal. You only have to specify the displayname, account, password
>and registrar. I think you have a mistake in your extensions.conf. Does
>it work with another (soft)phone?
>
>Regards,
>Joris
>
>
>
>On Oct 15, 2004, at 1:51 PM, James Bean wrote:
>
>> I am having a problem with my new SNOM190 and my asterisk box.
>> ?
>> Incoming calls to the SNOM work perfectly, but when i dial-out I get a
>> "Not Found: <number dialed>" on the SNOM display
everytime I try,
>> nothing shows up on the console of the asterisk box so its not even
>> touching it.
>> ?
>> I have the latest 3.54 firmware on it and when I looked at the Line 1
>> setup for my asterisk box I released that in the SNOM phone there is
>> nothing in my "Dial-Plan String" I take it it matches this
inside the
>> phone to choose which line to use in the SNOM phone.
>> ?
>> Unfortunately I am not finding much on the format of the Dial-Plan
>> String in the SNOM phones.
>> ?
>> All I need is for it to send all calls regardless of format to the
>> asterisk box.
>> ?
>> Anyone got any suggestions.
>> ?
>> James
>>