[Asterisk-Users] Cisco 7960G "disk full error"

Shilliday, Jim
Tue, 12 Oct 2004 15:32:16 -0000

Careful - in the later versions, P00* no longer specifies a protocol,
it's actually the UAL.



Jim Shilliday



-----Original Message-----
From: Andrew Edmond [mailto:edmond@candlepeople.com]
Sent: Tuesday, October 12, 2004 5:59 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Cisco 7960G "disk full error"



Henry,



Thanks!  This is a step in the right direction...



However, since it has P00* firmware on it, it never downloads
SIPDefault.cnf.  I guess I'll have to make SEPDefault.cnf as small as
possible then...?



Andrew



	-----Original Message-----
	From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Henry
Devito
	Sent: Tuesday, October 12, 2004 2:43 PM
	To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
	Subject: RE: [Asterisk-Users] Cisco 7960G "disk full error"

	The buffer is full on the 7960 because it keeps the old software
along with downloading the new software just incase the new software
fails.  What I have been doing is using a very generic SIPDefault.cnf
and that allows enough space to download the upgrades.



	This is the SIPDefault.cnf I use for upgrades.  Once the upgrade
is done use your original SIPDefault.



	image_version: "P0S3-04-4-00"

	# Proxy Server

	proxy1_address: "192.168.254.4"

	proxy6_port:"5060"










  _____


	From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Andrew
Edmond
	Sent: Tuesday, October 12, 2004 4:26 PM
	To: asterisk-users@lists.digium.com
	Subject: [Asterisk-Users] Cisco 7960G "disk full error"



	Hello,



	I'm trying to upgrade my 7960G that I bought off ebay to SIP 7.2
firmware.  Apparently this phone had pretty old firmware on it... it's
using Application Load ID P003H310 (version 3.0.12 Call Manager).



	I've setup both a UNIX and Windows (SolarWinds) tftp server, and
acquired firmware images for SIP 3.2, 4.4, 5.3, 6.3, and 7.2.



	I set my OS79XX.txt contents to 8.3 filenames to download
P0S3-03-2-00.bin (renamed to 8.3 filename P0S30320.bin).



	The tftp server successfully logs the connection from the phone,
succesfully downloads OS79XX.txt, and then starts to download
P0S30320.bin.  After 391168 bytes of download (the file is 409k), the
phone dumps the transfer.



	So I installed ethereal on my windows server.  It shows that at
packet 769 the cisco phone reports "Disk Full".



	I looked into this and came up with these previous posts:



	http://www.loligo.com/asterisk/Cisco/79xx/upgrading.79xx.phones


http://lists.digium.com/pipermail/asterisk-users/2003-October/023021.htm
l



	However, since my phone firmware is so old I assume that I might
need SIP 2.3 firmware to get this going.



	In actuality, this is taking WAY more time than I had
anticipated, so finally I'm reaching out to anyone who has had old
firmware like mine (P003H310) and successfully upgraded it.



	Thank you!



	Andrew Edmond

-------------- next part --------------
An HTML attachment was scrubbed...