\[Asterisk-Users] Adtran Channel Bank? - Email found in subject

Jay Milk
2004-04-25T17:30:48Z

What if the incoming POTS are actually FXS ports of an ATA186?  What's
the alternative for FXOs?  How would a 12/12 CAC compare?  After looking
at various options, it seems by scarcest commodity are PCI slots, so I'd
like to use a solution where each CO line won't cost me a slot.

-----Original Message-----
From: asterisk-users-admin@lists.digium.com
[mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Greg Scasny
Sent: Sunday, April 25, 2004 12:54 AM
To: asterisk-users@lists.digium.com
Subject: RE: \[Asterisk-Users] Adtran Channel Bank? - Email found in
subject


Jay,

I have had a lot of trouble with the FXO ports on Adtran TA750. Unless
the incoming POTS lines have a balance impedance, they will buzz very
bad.

Gregory P. Scasny

Golden Technologies Inc.

http://www.golden-tech.com

219-462-7200


-----Original Message-----
From: asterisk-users-admin@lists.digium.com
[mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Jay Milk
Sent: Sunday, April 25, 2004 12:16 AM
To: asterisk-users@lists.digium.com
Subject: [SPAM] - [Asterisk-Users] Adtran Channel Bank? - Email found in
subject

I'm new to Asterisk -- don't have it set-up yet, just comparing options.
Can I do this:

Wildcard T100P going into an Adtran Total Access 750 or 850, purchased
from ebay -- most of those come with a few FXS cards; swap one quad-FXS
with a quad-FXO card for four CO lines and up to 20 analog extensions.
If I understand correctly, I can also terminate a couple of SIP
connections (* acts as a SIP client) as well as create SIP extensions (*
as a SIP server).

What kind of processor would I need for this?  Will the "leftover"
P2-233 be enough, should I revive a 1.2GHz Celeron, or should I free up
an Athlon 2200+ for this?  Or start fresh with a 2.5+ GHz Celeron (or
P4?)

As for call volume, this is mainly a super-charged home-office. Asterisk
is mainly for the "cool" factor and won't handle more than two
calls
(four channels) at a time.  The business line should receive more
polished call-handling, the home-lines should become more practical
(ring my wife's extension during business hours, etc).

How (and how well) does * support ADSI?  Can I pump out data to
ADSI-capable phones through a T100P and Adtran Channel bank?

Thanks in advance.


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit: