[Asterisk-Users] System freeze

Michael Welter
Mon, 09 Feb 2004 21:53:50 -0000

Today I had five system freezes.  After re-examining the log file I see
the following line precedes each freeze:

"Got event 2 (Ring/Answered)"

However, I also get this same message numerous times without a freeze.
Many are followed by "Unable to create channel of type Zap".

This is a single processor Athlon system with two T100P cards.  As far
as I know, there were no calls in progress when the system froze.  There
has been no meetme activity.  There shouldn't have been any inbound call
activity on the new T1 (the TNs haven't been ported yet)--inbound calls
use the POTS lines, outbound the new T1 circuit.  Each T100P has a
separate IRQ.

Any feedback would be appreciated.

Mike



Michael Welter wrote:
> I have a Gigabyte K7 motherboard with an Athlon 2400+ processor.  Before
> the T1 install I had two T100P cards, one for the channel bank and the
> other unused.  This ran perfect for a month.
>
> Last week we installed a new integrated T1 into the unused T100P (to
> replace POTS lines and DSL.)  In BIOS, I disabled some unused
> peripherals so that each T100P would find its own unique IRQ.
>
> I also installed the updated asterisk, libpri, and zaptel sources.
>
> I have seen two system freezes--one on Friday and one this morning.  The
> whole system freezes--no LAN, no phones, no console.  During this
> morning's freeze there were no calls in progress.  The logs say
nothing.
>
> Has anyone else seen this?  I suspect it isn't an asterisk problem, but
> I would appreciate feedback.
>
> Thanks,
> Mike
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>