[Asterisk-Users] question for oh323 users

Anthony Law
Fri, 06 Feb 2004 07:56:28 -0000

Hi,

Thanks for your reply. I am definite that my h323 is running on ciscoB
because the below scenario is working fine.

pstn----ciscoA-----ciscoB----pstn

I have also eliminated access-list problem because if my access-list is
applied I could see packets hiting my access-list

permit tcp host 192.168.1.2 any eq 1720 (60 matches)

Is my syntax below correct ??

exten => _1905XXXXXXX,1,Dial,OH323/192.168.1.3

Any help would be appreciated.


Regards,



Anthony


----- Original Message -----
From: "Tomica Crnek" <Tomica.Crnek@span.hr>
To: <anthonyl@accessv.com>
Sent: Friday, February 06, 2004 3:03 AM
Subject: RE: [Asterisk-Users] question for oh323 users


>
> Hi, it seams to me that h.323 service on your cisco B could be down. You
> see packets coming to this box, but did you activate h.323. Try
"telnet
> 192.168.1.3 1720" to see if it is running. If it is, then check to see
> if you are allowing connections to it from 192.168.1.2
>
> Tomica
>
>
> -----Original Message-----
> From: asterisk-users-admin@lists.digium.com
> [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Anthony Law
> Sent: Thursday, February 05, 2004 10:41 PM
> To: asterisk-users@lists.digium.com
> Subject: [Asterisk-Users] question for oh323 users
>
> Hi,
>
> I am trying to forward calls from one cisco gateway to another cisco
> gateway using asterisk
>
> cisco(5300)A 192.168.1.1
> asterisk 192.168.1.2
> cisco(5300)B 192.168.1.3
>
> pstn ------ciscoA-----asterisk ------ciscoB------pstn
>
> I have the below in my extension.conf
>
> [default]
> exten => _1905XXXXXXX,1,Dial,OH323/192.168.1.3
>
> I keep getting error and I don't know what is wrong.
> I am able to see in my ciscoB accesslist, tcp packets are coming from
> 192.168.1.2
>
> I get below error in my asterisk CLI
>
> Feb  5 16:17:01 ERROR[29716]: chan_oh323.c:1004 oh323_call: H323:0:
> Could not call 192.168.1.3.
> Feb  5 16:17:11 WARNING[29716]: pbx.c:1829 ast_pbx_run: Timeout, but no
> rule 't' in context 'default'
>
> It would be much appreciated if someone could point out what I am doing
> wrong or to any documentations. Many thanks.
>
>
> Regards,
>
>
>
> Anthony
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>