[Asterisk-Users] fxs without fxo

Matthew Pallotta
Thu, 24 Jul 2003 13:26:21 -0000

Turned out to be a incompatibility with my server hardware. This version of the
TDM400P was never going to work. So this server will work great as an VoIP only
server.
---------- Original Message ----------------------------------
From: "Stefano Finetti" <ssfinetti@lynxautomotive.it>
Reply-To: asterisk-users@lists.digium.com
Date:  Thu, 24 Jul 2003 10:10:27 +0200


From: "Matthew Pallotta" <matthewp@comptek.net>


> Is there any way to run asterisk without a fxo card? I am looking only
> run SIP and a single fxs card.
>


Sure there is.

You can easily set up a pure VoIP box (is the easiest configuration of *)
and use for "internal" comm environment (obviously, until you
don't put * in
condition to "talk" with the normal phone lines, you'll not be
able to call
a non-VoIP client)

Fxo and Fxs are not strict requirements to have * work.

* can use FXO, FXS, PRI, and BRI lines, but is not mandatory to have them.

Just take a couple of SIP phones (also soft-phones), set up the sip.conf
properly, and you'll have a perfectly running * box for VoIP use.

If you take the fxs card, you wil be able to make a normal phone ring if
called from the VoIP phones, and call from the normal phone to the VoIP
phones.

--
Stefano Finetti

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com