Sevinj Aghayeva
2022-Aug-12 15:30 UTC
[Bridge] [PATCH RFC net-next 0/3] net: vlan: fix bridge binding behavior and add selftests
On Wed, Aug 10, 2022 at 4:54 AM Nikolay Aleksandrov <razor at blackwall.org> wrote:> > On 10/08/2022 06:11, Sevinj Aghayeva wrote: > > When bridge binding is enabled for a vlan interface, it is expected > > that the link state of the vlan interface will track the subset of the > > ports that are also members of the corresponding vlan, rather than > > that of all ports. > > > > Currently, this feature works as expected when a vlan interface is > > created with bridge binding enabled: > > > > ip link add link br name vlan10 type vlan id 10 protocol 802.1q \ > > bridge_binding on > > > > However, the feature does not work when a vlan interface is created > > with bridge binding disabled, and then enabled later: > > > > ip link add link br name vlan10 type vlan id 10 protocol 802.1q \ > > bridge_binding off > > ip link set vlan10 type vlan bridge_binding on > > > > After these two commands, the link state of the vlan interface > > continues to track that of all ports, which is inconsistent and > > confusing to users. This series fixes this bug and introduces two > > tests for the valid behavior. > > > > Sevinj Aghayeva (3): > > net: core: export call_netdevice_notifiers_info > > net: 8021q: fix bridge binding behavior for vlan interfaces > > selftests: net: tests for bridge binding behavior > > > > include/linux/netdevice.h | 2 + > > net/8021q/vlan.h | 2 +- > > net/8021q/vlan_dev.c | 25 ++- > > net/core/dev.c | 7 +- > > tools/testing/selftests/net/Makefile | 1 + > > .../selftests/net/bridge_vlan_binding_test.sh | 143 ++++++++++++++++++ > > 6 files changed, 172 insertions(+), 8 deletions(-) > > create mode 100755 tools/testing/selftests/net/bridge_vlan_binding_test.sh > > > > Hi, > NETDEV_CHANGE event is already propagated when the vlan changes flags, > NETDEV_CHANGEUPPER is used when the devices' relationship changes not their flags. > The only problem you have to figure out is that the flag has changed. The fix itself > must be done within the bridge, not 8021q. You can figure it out based on current bridge > loose binding state and the vlan's changed state, again in the bridge's NETDEV_CHANGE > handler. Unfortunately the proper fix is much more involved and will need new > infra, you'll have to track the loose binding vlans in the bridge. To do that you should > add logic that reflects the current vlans' loose binding state *only* for vlans that also > exist in the bridge, the rest which are upper should be carrier off if they have the loose > binding flag set. > > Alternatively you can add a new NETDEV_ notifier (using something similar to struct netdev_notifier_pre_changeaddr_info) > and add link type-specific space (e.g. union of link type-specific structs) in the struct which will contain > what changed for 8021q and will be properly interpreted by the bridge. The downside is that we'll generate > 2 notifications when changing the loose binding flag, but on the bright side won't have to track anything > in the bridge, just handle the new notifier type. This might be the easiest path, the fix is still in > the bridge though, the 8021q module just needs to fill in the new struct and emit the notification on > any loose binding changes, the bridge must decide if it should process it (i.e. based on upper/lower > relationship). Such notifier can be also re-used by other link types to propagate link-type specific > changes.Hi Nik, Can you please clarify the following? 1) should the new NETDEV_ notifier be about the vlan device and not the bridge? That is, should I handle it in br_device_event? 2) is it still okay to export call_netdevice_notifiers_info or should i write a new function for this? The answers to the above wasn't clear to me, but I came up with the following patch anyway, so perhaps you can also comment on it. I'm pasting it inline; this is against 5.19. Thanks! diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 2563d30736e9..c63205eb1f72 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2762,6 +2762,7 @@ enum netdev_cmd { NETDEV_UNREGISTER, NETDEV_CHANGEMTU, /* notify after mtu change happened */ NETDEV_CHANGEADDR, /* notify after the address change */ + NETDEV_CHANGEUPPERFLAGS, NETDEV_PRE_CHANGEADDR, /* notify before the address change */ NETDEV_GOING_DOWN, NETDEV_CHANGENAME, @@ -2837,6 +2838,12 @@ struct netdev_notifier_changelowerstate_info { void *lower_state_info; /* is lower dev state */ }; +struct netdev_notifier_changeupperflags_info { + struct netdev_notifier_info info; /* must be first */ + struct net_device *upper_dev; + bool vlan_bridge_binding; +}; + struct netdev_notifier_pre_changeaddr_info { struct netdev_notifier_info info; /* must be first */ const unsigned char *dev_addr; @@ -2898,6 +2905,8 @@ netdev_notifier_info_to_extack(const struct netdev_notifier_info *info) } int call_netdevice_notifiers(unsigned long val, struct net_device *dev); +int call_netdevice_notifiers_info(unsigned long val, + struct netdev_notifier_info *info); extern rwlock_t dev_base_lock; /* Device list lock */ diff --git a/net/8021q/vlan.h b/net/8021q/vlan.h index 5eaf38875554..71947cdcfaaa 100644 --- a/net/8021q/vlan.h +++ b/net/8021q/vlan.h @@ -130,7 +130,7 @@ void vlan_dev_set_ingress_priority(const struct net_device *dev, int vlan_dev_set_egress_priority(const struct net_device *dev, u32 skb_prio, u16 vlan_prio); void vlan_dev_free_egress_priority(const struct net_device *dev); -int vlan_dev_change_flags(const struct net_device *dev, u32 flag, u32 mask); +int vlan_dev_change_flags(struct net_device *dev, u32 flag, u32 mask); void vlan_dev_get_realdev_name(const struct net_device *dev, char *result, size_t size); diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index 839f2020b015..68da3901dfb0 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -208,11 +208,18 @@ int vlan_dev_set_egress_priority(const struct net_device *dev, return 0; } +static inline bool netif_is_bridge(const struct net_device *dev) +{ + return dev->rtnl_link_ops && + !strcmp(dev->rtnl_link_ops->kind, "bridge"); +} + /* Flags are defined in the vlan_flags enum in * include/uapi/linux/if_vlan.h file. */ -int vlan_dev_change_flags(const struct net_device *dev, u32 flags, u32 mask) +int vlan_dev_change_flags(struct net_device *dev, u32 flags, u32 mask) { + struct netdev_notifier_changeupperflags_info info; struct vlan_dev_priv *vlan = vlan_dev_priv(dev); u32 old_flags = vlan->flags; @@ -223,19 +230,33 @@ int vlan_dev_change_flags(const struct net_device *dev, u32 flags, u32 mask) vlan->flags = (old_flags & ~mask) | (flags & mask); - if (netif_running(dev) && (vlan->flags ^ old_flags) & VLAN_FLAG_GVRP) { + if (!netif_running(dev)) + return 0; + + if ((vlan->flags ^ old_flags) & VLAN_FLAG_GVRP) { if (vlan->flags & VLAN_FLAG_GVRP) vlan_gvrp_request_join(dev); else vlan_gvrp_request_leave(dev); } - if (netif_running(dev) && (vlan->flags ^ old_flags) & VLAN_FLAG_MVRP) { + if ((vlan->flags ^ old_flags) & VLAN_FLAG_MVRP) { if (vlan->flags & VLAN_FLAG_MVRP) vlan_mvrp_request_join(dev); else vlan_mvrp_request_leave(dev); } + + if ((vlan->flags ^ old_flags) & VLAN_FLAG_BRIDGE_BINDING && + netif_is_bridge(vlan->real_dev)) { + info.info.dev = vlan->real_dev; + info.upper_dev = dev; + info.vlan_bridge_binding + !!(vlan->flags & VLAN_FLAG_BRIDGE_BINDING); + call_netdevice_notifiers_info(NETDEV_CHANGEUPPERFLAGS, + &info.info); + } + return 0; } diff --git a/net/bridge/br_vlan.c b/net/bridge/br_vlan.c index 0f5e75ccac79..cbcb0877d4a4 100644 --- a/net/bridge/br_vlan.c +++ b/net/bridge/br_vlan.c @@ -1718,6 +1718,7 @@ static void nbp_vlan_set_vlan_dev_state(struct net_bridge_port *p, u16 vid) /* Must be protected by RTNL. */ int br_vlan_bridge_event(struct net_device *dev, unsigned long event, void *ptr) { + struct netdev_notifier_changeupperflags_info *flags_info; struct netdev_notifier_changeupper_info *info; struct net_bridge *br = netdev_priv(dev); int vlcmd = 0, ret = 0; @@ -1739,7 +1740,11 @@ int br_vlan_bridge_event(struct net_device *dev, unsigned long event, void *ptr) info = ptr; br_vlan_upper_change(dev, info->upper_dev, info->linking); break; - + case NETDEV_CHANGEUPPERFLAGS: + flags_info = ptr; + br_vlan_upper_change(dev, flags_info->upper_dev, + flags_info->vlan_bridge_binding); + break; case NETDEV_CHANGE: case NETDEV_UP: if (!br_opt_get(br, BROPT_VLAN_BRIDGE_BINDING)) diff --git a/net/core/dev.c b/net/core/dev.c index 30a1603a7225..bc8640d77d83 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -160,8 +160,6 @@ struct list_head ptype_base[PTYPE_HASH_SIZE] __read_mostly; struct list_head ptype_all __read_mostly; /* Taps */ static int netif_rx_internal(struct sk_buff *skb); -static int call_netdevice_notifiers_info(unsigned long val, - struct netdev_notifier_info *info); static int call_netdevice_notifiers_extack(unsigned long val, struct net_device *dev, struct netlink_ext_ack *extack); @@ -1624,7 +1622,7 @@ const char *netdev_cmd_to_name(enum netdev_cmd cmd) N(POST_INIT) N(RELEASE) N(NOTIFY_PEERS) N(JOIN) N(CHANGEUPPER) N(RESEND_IGMP) N(PRECHANGEMTU) N(CHANGEINFODATA) N(BONDING_INFO) N(PRECHANGEUPPER) N(CHANGELOWERSTATE) N(UDP_TUNNEL_PUSH_INFO) - N(UDP_TUNNEL_DROP_INFO) N(CHANGE_TX_QUEUE_LEN) + N(UDP_TUNNEL_DROP_INFO) N(CHANGE_TX_QUEUE_LEN) N(CHANGEUPPERFLAGS) N(CVLAN_FILTER_PUSH_INFO) N(CVLAN_FILTER_DROP_INFO) N(SVLAN_FILTER_PUSH_INFO) N(SVLAN_FILTER_DROP_INFO) N(PRE_CHANGEADDR) N(OFFLOAD_XSTATS_ENABLE) N(OFFLOAD_XSTATS_DISABLE) @@ -1927,8 +1925,8 @@ static void move_netdevice_notifiers_dev_net(struct net_device *dev, * are as for raw_notifier_call_chain(). */ -static int call_netdevice_notifiers_info(unsigned long val, - struct netdev_notifier_info *info) +int call_netdevice_notifiers_info(unsigned long val, + struct netdev_notifier_info *info) { struct net *net = dev_net(info->dev); int ret; @@ -1944,6 +1942,7 @@ static int call_netdevice_notifiers_info(unsigned long val, return ret; return raw_notifier_call_chain(&netdev_chain, val, info); } +EXPORT_SYMBOL(call_netdevice_notifiers_info); /** * call_netdevice_notifiers_info_robust - call per-netns notifier blocks> > Both of these avoid any direct dependencies between the bridge and 8021q. Any other suggestions that > are simpler, avoid direct dependencies and solve the issue in a generic way would be appreciated. > > Just be careful about introducing too much unnecessary processing because we > can have lots of vlan devices in a system. > > Cheers, > Nik-- Sevinj.Aghayeva
Nikolay Aleksandrov
2022-Aug-14 07:38 UTC
[Bridge] [PATCH RFC net-next 0/3] net: vlan: fix bridge binding behavior and add selftests
On 12/08/2022 18:30, Sevinj Aghayeva wrote:> On Wed, Aug 10, 2022 at 4:54 AM Nikolay Aleksandrov <razor at blackwall.org> wrote: >> >> On 10/08/2022 06:11, Sevinj Aghayeva wrote: >>> When bridge binding is enabled for a vlan interface, it is expected >>> that the link state of the vlan interface will track the subset of the >>> ports that are also members of the corresponding vlan, rather than >>> that of all ports. >>> >>> Currently, this feature works as expected when a vlan interface is >>> created with bridge binding enabled: >>> >>> ip link add link br name vlan10 type vlan id 10 protocol 802.1q \ >>> bridge_binding on >>> >>> However, the feature does not work when a vlan interface is created >>> with bridge binding disabled, and then enabled later: >>> >>> ip link add link br name vlan10 type vlan id 10 protocol 802.1q \ >>> bridge_binding off >>> ip link set vlan10 type vlan bridge_binding on >>> >>> After these two commands, the link state of the vlan interface >>> continues to track that of all ports, which is inconsistent and >>> confusing to users. This series fixes this bug and introduces two >>> tests for the valid behavior. >>> >>> Sevinj Aghayeva (3): >>> net: core: export call_netdevice_notifiers_info >>> net: 8021q: fix bridge binding behavior for vlan interfaces >>> selftests: net: tests for bridge binding behavior >>> >>> include/linux/netdevice.h | 2 + >>> net/8021q/vlan.h | 2 +- >>> net/8021q/vlan_dev.c | 25 ++- >>> net/core/dev.c | 7 +- >>> tools/testing/selftests/net/Makefile | 1 + >>> .../selftests/net/bridge_vlan_binding_test.sh | 143 ++++++++++++++++++ >>> 6 files changed, 172 insertions(+), 8 deletions(-) >>> create mode 100755 tools/testing/selftests/net/bridge_vlan_binding_test.sh >>> >> >> Hi, >> NETDEV_CHANGE event is already propagated when the vlan changes flags, >> NETDEV_CHANGEUPPER is used when the devices' relationship changes not their flags. >> The only problem you have to figure out is that the flag has changed. The fix itself >> must be done within the bridge, not 8021q. You can figure it out based on current bridge >> loose binding state and the vlan's changed state, again in the bridge's NETDEV_CHANGE >> handler. Unfortunately the proper fix is much more involved and will need new >> infra, you'll have to track the loose binding vlans in the bridge. To do that you should >> add logic that reflects the current vlans' loose binding state *only* for vlans that also >> exist in the bridge, the rest which are upper should be carrier off if they have the loose >> binding flag set. >> >> Alternatively you can add a new NETDEV_ notifier (using something similar to struct netdev_notifier_pre_changeaddr_info) >> and add link type-specific space (e.g. union of link type-specific structs) in the struct which will contain >> what changed for 8021q and will be properly interpreted by the bridge. The downside is that we'll generate >> 2 notifications when changing the loose binding flag, but on the bright side won't have to track anything >> in the bridge, just handle the new notifier type. This might be the easiest path, the fix is still in >> the bridge though, the 8021q module just needs to fill in the new struct and emit the notification on >> any loose binding changes, the bridge must decide if it should process it (i.e. based on upper/lower >> relationship). Such notifier can be also re-used by other link types to propagate link-type specific >> changes.Hi,> > Hi Nik, > > Can you please clarify the following? > > 1) should the new NETDEV_ notifier be about the vlan device and not > the bridge? That is, should I handle it in br_device_event?Yes, it should be about the vlan device (i.e. the target device that changes its state).> 2) is it still okay to export call_netdevice_notifiers_info or should > i write a new function for this? >If you need it, export it. But if you do it similar to netdev_notifier_pre_changeaddr_info then you don't have to, more below.> The answers to the above wasn't clear to me, but I came up with the > following patch anyway, so perhaps you can also comment on it. I'm > pasting it inline; this is against 5.19. >A few comments inline below,> Thanks! > > diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h > index 2563d30736e9..c63205eb1f72 100644 > --- a/include/linux/netdevice.h > +++ b/include/linux/netdevice.h > @@ -2762,6 +2762,7 @@ enum netdev_cmd { > NETDEV_UNREGISTER, > NETDEV_CHANGEMTU, /* notify after mtu change happened */ > NETDEV_CHANGEADDR, /* notify after the address change */ > + NETDEV_CHANGEUPPERFLAGS,Please don't use CHANGEUPPER, that is about a device changing its upper device. Also make it more generic, NETDEV_CHANGEFLAGS is too specific. For example today we have NETDEV_CHANGEINFODATA which TBH sounds good, but is tied to bonding in a few places, e.g.: case NETDEV_CHANGEINFODATA: rtnl_event_type = IFLA_EVENT_BONDING_OPTIONS; which is very unfortunate. We really need a generic notifier that can pass link-type specific information alongside the device. As I mentioned please see how netdev_notifier_pre_changeaddr_info is handled, we need something generic that extends netdev_notifier_info and the various link types can add their own structures in a union which is to be interpreted based on the link type. For example if the new notifier is called NETDEV_CHANGE_DETAILS then in the bridge we'll check if the target device is a vlan and interpret the structure's union as the vlan change information. It'd be nice to get more feedback about this from others as well. Also note that this notifier is for internal use for the time being so it's not necessary to export these notifications to user-space yet. I would've opted for extending NETDEV_CHANGE itself, but that would be quite the adventure. :)> NETDEV_PRE_CHANGEADDR, /* notify before the address change */ > NETDEV_GOING_DOWN, > NETDEV_CHANGENAME, > @@ -2837,6 +2838,12 @@ struct netdev_notifier_changelowerstate_info { > void *lower_state_info; /* is lower dev state */ > }; > > +struct netdev_notifier_changeupperflags_info { > + struct netdev_notifier_info info; /* must be first */ > + struct net_device *upper_dev;just dev, not upper we should be able to use this construct for any link type and actually we don't need the device here, we already have it in info.dev> + bool vlan_bridge_binding;add this into a vlan-specific structure that should be in a union here so other link types can add their own later> +}; > + > struct netdev_notifier_pre_changeaddr_info { > struct netdev_notifier_info info; /* must be first */ > const unsigned char *dev_addr; > @@ -2898,6 +2905,8 @@ netdev_notifier_info_to_extack(const struct > netdev_notifier_info *info) > } > > int call_netdevice_notifiers(unsigned long val, struct net_device *dev); > +int call_netdevice_notifiers_info(unsigned long val, > + struct netdev_notifier_info *info);No need for this if you handle notifications similar to dev_pre_changeaddr_notify() with netdev_notifier_pre_changeaddr_info> > > extern rwlock_t dev_base_lock; /* Device list lock */ > diff --git a/net/8021q/vlan.h b/net/8021q/vlan.h > index 5eaf38875554..71947cdcfaaa 100644 > --- a/net/8021q/vlan.h > +++ b/net/8021q/vlan.h > @@ -130,7 +130,7 @@ void vlan_dev_set_ingress_priority(const struct > net_device *dev, > int vlan_dev_set_egress_priority(const struct net_device *dev, > u32 skb_prio, u16 vlan_prio); > void vlan_dev_free_egress_priority(const struct net_device *dev); > -int vlan_dev_change_flags(const struct net_device *dev, u32 flag, u32 mask); > +int vlan_dev_change_flags(struct net_device *dev, u32 flag, u32 mask); > void vlan_dev_get_realdev_name(const struct net_device *dev, char *result, > size_t size); > > diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c > index 839f2020b015..68da3901dfb0 100644 > --- a/net/8021q/vlan_dev.c > +++ b/net/8021q/vlan_dev.c > @@ -208,11 +208,18 @@ int vlan_dev_set_egress_priority(const struct > net_device *dev, > return 0; > } > > +static inline bool netif_is_bridge(const struct net_device *dev)no inline in .c files, let the compiler decide> +{ > + return dev->rtnl_link_ops && > + !strcmp(dev->rtnl_link_ops->kind, "bridge"); > +} > +there is already netif_is_bridge_master()> /* Flags are defined in the vlan_flags enum in > * include/uapi/linux/if_vlan.h file. > */ > -int vlan_dev_change_flags(const struct net_device *dev, u32 flags, u32 mask) > +int vlan_dev_change_flags(struct net_device *dev, u32 flags, u32 mask) > { > + struct netdev_notifier_changeupperflags_info info; > struct vlan_dev_priv *vlan = vlan_dev_priv(dev); > u32 old_flags = vlan->flags; > > @@ -223,19 +230,33 @@ int vlan_dev_change_flags(const struct > net_device *dev, u32 flags, u32 mask) > > vlan->flags = (old_flags & ~mask) | (flags & mask); > > - if (netif_running(dev) && (vlan->flags ^ old_flags) & VLAN_FLAG_GVRP) { > + if (!netif_running(dev)) > + return 0; > + > + if ((vlan->flags ^ old_flags) & VLAN_FLAG_GVRP) { > if (vlan->flags & VLAN_FLAG_GVRP) > vlan_gvrp_request_join(dev); > else > vlan_gvrp_request_leave(dev); > } > > - if (netif_running(dev) && (vlan->flags ^ old_flags) & VLAN_FLAG_MVRP) { > + if ((vlan->flags ^ old_flags) & VLAN_FLAG_MVRP) { > if (vlan->flags & VLAN_FLAG_MVRP) > vlan_mvrp_request_join(dev); > else > vlan_mvrp_request_leave(dev); > } > + > + if ((vlan->flags ^ old_flags) & VLAN_FLAG_BRIDGE_BINDING && > + netif_is_bridge(vlan->real_dev)) { > + info.info.dev = vlan->real_dev; > + info.upper_dev = dev; > + info.vlan_bridge_binding > + !!(vlan->flags & VLAN_FLAG_BRIDGE_BINDING); > + call_netdevice_notifiers_info(NETDEV_CHANGEUPPERFLAGS, > + &info.info); > + } > + > return 0; > } > > diff --git a/net/bridge/br_vlan.c b/net/bridge/br_vlan.c > index 0f5e75ccac79..cbcb0877d4a4 100644 > --- a/net/bridge/br_vlan.c > +++ b/net/bridge/br_vlan.c > @@ -1718,6 +1718,7 @@ static void nbp_vlan_set_vlan_dev_state(struct > net_bridge_port *p, u16 vid) > /* Must be protected by RTNL. */ > int br_vlan_bridge_event(struct net_device *dev, unsigned long event, > void *ptr) > { > + struct netdev_notifier_changeupperflags_info *flags_info; > struct netdev_notifier_changeupper_info *info; > struct net_bridge *br = netdev_priv(dev); > int vlcmd = 0, ret = 0; > @@ -1739,7 +1740,11 @@ int br_vlan_bridge_event(struct net_device > *dev, unsigned long event, void *ptr) > info = ptr; > br_vlan_upper_change(dev, info->upper_dev, info->linking); > break; > - > + case NETDEV_CHANGEUPPERFLAGS: > + flags_info = ptr; > + br_vlan_upper_change(dev, flags_info->upper_dev, > + flags_info->vlan_bridge_binding); > + break; > case NETDEV_CHANGE: > case NETDEV_UP: > if (!br_opt_get(br, BROPT_VLAN_BRIDGE_BINDING)) > diff --git a/net/core/dev.c b/net/core/dev.c > index 30a1603a7225..bc8640d77d83 100644 > --- a/net/core/dev.c > +++ b/net/core/dev.c > @@ -160,8 +160,6 @@ struct list_head ptype_base[PTYPE_HASH_SIZE] __read_mostly; > struct list_head ptype_all __read_mostly; /* Taps */ > > static int netif_rx_internal(struct sk_buff *skb); > -static int call_netdevice_notifiers_info(unsigned long val, > - struct netdev_notifier_info *info); > static int call_netdevice_notifiers_extack(unsigned long val, > struct net_device *dev, > struct netlink_ext_ack *extack); > @@ -1624,7 +1622,7 @@ const char *netdev_cmd_to_name(enum netdev_cmd cmd) > N(POST_INIT) N(RELEASE) N(NOTIFY_PEERS) N(JOIN) N(CHANGEUPPER) > N(RESEND_IGMP) N(PRECHANGEMTU) N(CHANGEINFODATA) N(BONDING_INFO) > N(PRECHANGEUPPER) N(CHANGELOWERSTATE) N(UDP_TUNNEL_PUSH_INFO) > - N(UDP_TUNNEL_DROP_INFO) N(CHANGE_TX_QUEUE_LEN) > + N(UDP_TUNNEL_DROP_INFO) N(CHANGE_TX_QUEUE_LEN) N(CHANGEUPPERFLAGS) > N(CVLAN_FILTER_PUSH_INFO) N(CVLAN_FILTER_DROP_INFO) > N(SVLAN_FILTER_PUSH_INFO) N(SVLAN_FILTER_DROP_INFO) > N(PRE_CHANGEADDR) N(OFFLOAD_XSTATS_ENABLE) N(OFFLOAD_XSTATS_DISABLE) > @@ -1927,8 +1925,8 @@ static void > move_netdevice_notifiers_dev_net(struct net_device *dev, > * are as for raw_notifier_call_chain(). > */ > > -static int call_netdevice_notifiers_info(unsigned long val, > - struct netdev_notifier_info *info) > +int call_netdevice_notifiers_info(unsigned long val, > + struct netdev_notifier_info *info) > { > struct net *net = dev_net(info->dev); > int ret; > @@ -1944,6 +1942,7 @@ static int > call_netdevice_notifiers_info(unsigned long val, > return ret; > return raw_notifier_call_chain(&netdev_chain, val, info); > } > +EXPORT_SYMBOL(call_netdevice_notifiers_info); > > /** > * call_netdevice_notifiers_info_robust - call per-netns notifier blocks > > >> >> Both of these avoid any direct dependencies between the bridge and 8021q. Any other suggestions that >> are simpler, avoid direct dependencies and solve the issue in a generic way would be appreciated. >> >> Just be careful about introducing too much unnecessary processing because we >> can have lots of vlan devices in a system. >> >> Cheers, >> Nik > > >