If you want to test, there are samba 4.15rc2 packages available for buster in my buster-experimental repo. Just use with care, prefered not on production servers.. But you can test and see if it works for you. Greetz, Louis> -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens > Chris Dos via samba > Verzonden: dinsdag 17 augustus 2021 14:41 > Aan: Ralph Boehme; samba at lists.samba.org > Onderwerp: Re: [Samba] Multichannel and RSS Not Detected > > On 8/17/21 6:35 AM, Ralph Boehme wrote: > > Am 08.08.21 um 00:43 schrieb Chris Dos via samba: > >> Each server has both of the 100G links bonded into a 802.3ad LAG. > > > > why? Maybe this is getting in the way. Multichannel is > supposed to work with > > the "raw" interfaces. > > > > Sorry, but I don't really have the time to dig into this, > but another thing > > I'd like to point out is that for Multichannel you should > use 4.15, in > > previous versions it was marked experimental for a reason. > > > > Cheers! > > -slow > > > > I took down the LAG as well and that did not make a change.? > I was reading > that all the bugs were fixed in 4.14 and that 4.15 would now > have official > support.? If 4.15 is recommended, then by all means I'll upgrade. > > ??? Chris > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/options/samba > >
Already upgraded to them.? :) Afraid it did not fix the problem.? Just don't know why one server works and the other doesn't.? They don't quite have the same packages installed, as one is running libvirt and the other has been slimmed down to just a SMB/NFS server.? They where running the same version of Samba (4.14), but now the one that we need it working on is running 4.15rc2. I understand that 4.15 should not run in production, but right now, we need this feature to work in order to do our project, so we are a bit desperate at this point. ??? Chris On 8/17/21 7:56 AM, L.P.H. van Belle via samba wrote:> If you want to test, there are samba 4.15rc2 packages available > for buster in my buster-experimental repo. > > Just use with care, prefered not on production servers.. > But you can test and see if it works for you. > > Greetz, > > Louis > > >> -----Oorspronkelijk bericht----- >> Van: samba [mailto:samba-bounces at lists.samba.org] Namens >> Chris Dos via samba >> Verzonden: dinsdag 17 augustus 2021 14:41 >> Aan: Ralph Boehme; samba at lists.samba.org >> Onderwerp: Re: [Samba] Multichannel and RSS Not Detected >> >> On 8/17/21 6:35 AM, Ralph Boehme wrote: >>> Am 08.08.21 um 00:43 schrieb Chris Dos via samba: >>>> Each server has both of the 100G links bonded into a 802.3ad LAG. >>> why? Maybe this is getting in the way. Multichannel is >> supposed to work with >>> the "raw" interfaces. >>> >>> Sorry, but I don't really have the time to dig into this, >> but another thing >>> I'd like to point out is that for Multichannel you should >> use 4.15, in >>> previous versions it was marked experimental for a reason. >>> >>> Cheers! >>> -slow >>> >> I took down the LAG as well and that did not make a change.? >> I was reading >> that all the bugs were fixed in 4.14 and that 4.15 would now >> have official >> support.? If 4.15 is recommended, then by all means I'll upgrade. >> >> ??? Chris >> -- >> To unsubscribe from this list go to the following URL and read the >> instructions: https://lists.samba.org/mailman/options/samba >> >> >
On the virtual hosts and possible guest.. Did you check if there not any problem with drivers and possible offloading of the nics.. I use XenServer, so thats the example i can give. https://github.com/cloudnull/XenServer-Offloading-Off/blob/master/offloadingoff.sh But which one does work now? You didnt tell that. :-( Greetz, Louis> -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens > Chris Dos via samba > Verzonden: dinsdag 17 augustus 2021 16:05 > Aan: samba at lists.samba.org > Onderwerp: Re: [Samba] Multichannel and RSS Not Detected > > Already upgraded to them.? :) > > Afraid it did not fix the problem.? Just don't know why one > server works and > the other doesn't.? They don't quite have the same packages > installed, as one > is running libvirt and the other has been slimmed down to > just a SMB/NFS > server.? They where running the same version of Samba (4.14), > but now the one > that we need it working on is running 4.15rc2. > > I understand that 4.15 should not run in production, but > right now, we need > this feature to work in order to do our project, so we are a > bit desperate at > this point. > > ??? Chris > > On 8/17/21 7:56 AM, L.P.H. van Belle via samba wrote: > > If you want to test, there are samba 4.15rc2 packages available > > for buster in my buster-experimental repo. > > > > Just use with care, prefered not on production servers.. > > But you can test and see if it works for you. > > > > Greetz, > > > > Louis > > > > > >> -----Oorspronkelijk bericht----- > >> Van: samba [mailto:samba-bounces at lists.samba.org] Namens > >> Chris Dos via samba > >> Verzonden: dinsdag 17 augustus 2021 14:41 > >> Aan: Ralph Boehme; samba at lists.samba.org > >> Onderwerp: Re: [Samba] Multichannel and RSS Not Detected > >> > >> On 8/17/21 6:35 AM, Ralph Boehme wrote: > >>> Am 08.08.21 um 00:43 schrieb Chris Dos via samba: > >>>> Each server has both of the 100G links bonded into a 802.3ad LAG. > >>> why? Maybe this is getting in the way. Multichannel is > >> supposed to work with > >>> the "raw" interfaces. > >>> > >>> Sorry, but I don't really have the time to dig into this, > >> but another thing > >>> I'd like to point out is that for Multichannel you should > >> use 4.15, in > >>> previous versions it was marked experimental for a reason. > >>> > >>> Cheers! > >>> -slow > >>> > >> I took down the LAG as well and that did not make a change.??? > >> I was reading > >> that all the bugs were fixed in 4.14 and that 4.15 would now > >> have official > >> support.??? If 4.15 is recommended, then by all means I'll upgrade. > >> > >> ????????? Chris > >> -- > >> To unsubscribe from this list go to the following URL and read the > >> instructions: https://lists.samba.org/mailman/options/samba > >> > >> > > > > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/options/samba > >