Matthew Benstead
2019-Jul-25 20:27 UTC
[Gluster-users] Brick missing trusted.glusterfs.dht xattr
Hi Nithya, Hmm... I don't remember if I did, but based on what I'm seeing it sounds like I probably didn't run rebalance or fix-layout. It looks like folders that haven't had any new files created have a dht of 0, while other folders have non-zero values. [root at gluster07 ~]# getfattr --absolute-names -m . -d -e hex /mnt/raid6-storage/storage/ | grep dht [root at gluster07 ~]# getfattr --absolute-names -m . -d -e hex /mnt/raid6-storage/storage/home | grep dht trusted.glusterfs.dht=0x00000000000000000000000000000000 [root at gluster07 ~]# getfattr --absolute-names -m . -d -e hex /mnt/raid6-storage/storage/home/matthewb | grep dht trusted.glusterfs.dht=0x00000001000000004924921a6db6dbc7 If I just run the fix-layout command will it re-create all of the dht values or just the missing ones? Since the brick is already fairly size balanced could I get away with running fix-layout but not rebalance? Or would the new dht layout mean slower accesses since the files may be expected on different bricks? Thanks, ?-Matthew -- Matthew Benstead System Administrator Pacific Climate Impacts Consortium <https://pacificclimate.org/> University of Victoria, UH1 PO Box 1800, STN CSC Victoria, BC, V8W 2Y2 Phone: +1-250-721-8432 Email: matthewb at uvic.ca On 7/24/19 9:30 PM, Nithya Balachandran wrote:> > > On Wed, 24 Jul 2019 at 22:12, Matthew Benstead <matthewb at uvic.ca > <mailto:matthewb at uvic.ca>> wrote: > > So looking more closely at the trusted.glusterfs.dht attributes > from the bricks it looks like they cover the entire range... and > there is no range left for gluster07. > > The first 6 bricks range from 0x00000000 to 0xffffffff - so... is > there a way to re-calculate what the dht values should be? Each of > the bricks should have a gap > > Gluster05 00000000 -> 2aaaaaa9 > Gluster06 2aaaaaaa -> 55555553 > Gluster01 55555554 -> 7ffffffd > Gluster02 7ffffffe -> aaaaaaa7 > Gluster03 aaaaaaa8 -> d5555551 > Gluster04 d5555552 -> ffffffff > Gluster07 None > > If we split the range into 7 servers that would be a gap of about > 0x24924924 for each server. > > Now in terms of the gluster07 brick, about 2 years ago the RAID > array the brick was stored on became corrupted. I ran the > remove-brick force command, then provisioned a new server, ran the > add-brick command and then restored the missing files from backup > by copying them back to the main gluster mount (not the brick). > > > Did you run a rebalance after performing the add-brick? Without a > rebalance/fix-layout , the layout for existing directories on the > volume will not? be updated to use the new brick as well. > > That the layout does not include the new brick in the root dir is in > itself is not a problem. Do you create a lot of files directly in the > root of the volume? If yes, you might want to run a rebalance. > Otherwise, if you mostly create files in newly added directories, you > can probably ignore this. You can check the layout for directories on > the volume and see if they incorporate the brick7. > > I would expect a lookup on the root to have set an xattr on the brick > with an empty layout range . The fact that the xattr does not exist at > all on the brick is what I am looking into. > > > It looks like prior to that event this was the layout - which > would make sense given the equal size of the 7 bricks: > > gluster02.pcic.uvic.ca <http://gluster02.pcic.uvic.ca> | SUCCESS | > rc=0 >> > # file: /mnt/raid6-storage/storage > trusted.glusterfs.dht=0x000000010000000048bfff206d1ffe5f > > gluster05.pcic.uvic.ca <http://gluster05.pcic.uvic.ca> | SUCCESS | > rc=0 >> > # file: /mnt/raid6-storage/storage > trusted.glusterfs.dht=0x0000000100000000b5dffce0da3ffc1f > > gluster04.pcic.uvic.ca <http://gluster04.pcic.uvic.ca> | SUCCESS | > rc=0 >> > # file: /mnt/raid6-storage/storage > trusted.glusterfs.dht=0x0000000100000000917ffda0b5dffcdf > > gluster03.pcic.uvic.ca <http://gluster03.pcic.uvic.ca> | SUCCESS | > rc=0 >> > # file: /mnt/raid6-storage/storage > trusted.glusterfs.dht=0x00000001000000006d1ffe60917ffd9f > > gluster01.pcic.uvic.ca <http://gluster01.pcic.uvic.ca> | SUCCESS | > rc=0 >> > # file: /mnt/raid6-storage/storage > trusted.glusterfs.dht=0x0000000100000000245fffe048bfff1f > > gluster07.pcic.uvic.ca <http://gluster07.pcic.uvic.ca> | SUCCESS | > rc=0 >> > # file: /mnt/raid6-storage/storage > trusted.glusterfs.dht=0x000000010000000000000000245fffdf > > gluster06.pcic.uvic.ca <http://gluster06.pcic.uvic.ca> | SUCCESS | > rc=0 >> > # file: /mnt/raid6-storage/storage > trusted.glusterfs.dht=0x0000000100000000da3ffc20ffffffff > > Which yields the following: > > 00000000 -> 245fffdf??? Gluster07 > 245fffe0 -> 48bfff1f??? Gluster01 > 48bfff20 -> 6d1ffe5f??? Gluster02 > 6d1ffe60 -> 917ffd9f??? Gluster03 > 917ffda0 -> b5dffcdf??? Gluster04 > b5dffce0 -> da3ffc1f??? Gluster05 > da3ffc20 -> ffffffff??? Gluster06 > > Is there some way to get back to this? > > Thanks, > ?-Matthew > > -- > Matthew Benstead > System Administrator > Pacific Climate Impacts Consortium <https://pacificclimate.org/> > University of Victoria, UH1 > PO Box 1800, STN CSC > Victoria, BC, V8W 2Y2 > Phone: +1-250-721-8432 > Email: matthewb at uvic.ca <mailto:matthewb at uvic.ca> > > On 7/18/19 7:20 AM, Matthew Benstead wrote: >> Hi Nithya, >> >> No - it was added about a year and a half ago. I have tried >> re-mounting the volume on the server, but it didn't add the attr: >> >> [root at gluster07 ~]# umount /storage/ >> [root at gluster07 ~]# cat /etc/fstab | grep "/storage" >> 10.0.231.56:/storage /storage glusterfs >> defaults,log-level=WARNING,backupvolfile-server=10.0.231.51 0 0 >> [root at gluster07 ~]# mount /storage/ >> [root at gluster07 ~]# df -h /storage/ >> Filesystem??????????? Size? Used Avail Use% Mounted on >> 10.0.231.56:/storage? 255T? 194T?? 62T? 77% /storage >> [root at gluster07 ~]# getfattr --absolute-names -m . -d -e hex >> /mnt/raid6-storage/storage/ >> # file: /mnt/raid6-storage/storage/ >> security.selinux=0x756e636f6e66696e65645f753a6f626a6563745f723a756e6c6162656c65645f743a733000 >> trusted.gfid=0x00000000000000000000000000000001 >> trusted.glusterfs.6f95525a-94d7-4174-bac4-e1a18fe010a2.xtime=0x5d307baa00023ec0 >> trusted.glusterfs.quota.dirty=0x3000 >> trusted.glusterfs.quota.size.2=0x00001b71d5279e000000000000763e32000000000005cd53 >> trusted.glusterfs.volume-id=0x6f95525a94d74174bac4e1a18fe010a2 >> >> Thanks, >> ?-Matthew >> >> On 7/17/19 10:04 PM, Nithya Balachandran wrote: >>> Hi Matthew, >>> >>> Was this node/brick added to the volume recently? If yes, try >>> mounting the volume on a fresh mount point - that should create >>> the xattr on this as well. >>> >>> Regards, >>> Nithya >>> >>> On Wed, 17 Jul 2019 at 21:01, Matthew Benstead <matthewb at uvic.ca >>> <mailto:matthewb at uvic.ca>> wrote: >>> >>> Hello, >>> >>> I've just noticed one brick in my 7 node distribute volume >>> is missing >>> the trusted.glusterfs.dht xattr...? How can I fix this? >>> >>> I'm running glusterfs-5.3-2.el7.x86_64 on CentOS 7. >>> >>> All of the other nodes are fine, but gluster07 from the list >>> below does >>> not have the attribute. >>> >>> $ ansible -i hosts gluster-servers[0:6] ... -m shell -a >>> "getfattr -m . >>> --absolute-names -n trusted.glusterfs.dht -e hex >>> /mnt/raid6-storage/storage" >>> ... >>> gluster05 | SUCCESS | rc=0 >> >>> # file: /mnt/raid6-storage/storage >>> trusted.glusterfs.dht=0x0000000100000000000000002aaaaaa9 >>> >>> gluster03 | SUCCESS | rc=0 >> >>> # file: /mnt/raid6-storage/storage >>> trusted.glusterfs.dht=0x0000000100000000aaaaaaa8d5555551 >>> >>> gluster04 | SUCCESS | rc=0 >> >>> # file: /mnt/raid6-storage/storage >>> trusted.glusterfs.dht=0x0000000100000000d5555552ffffffff >>> >>> gluster06 | SUCCESS | rc=0 >> >>> # file: /mnt/raid6-storage/storage >>> trusted.glusterfs.dht=0x00000001000000002aaaaaaa55555553 >>> >>> gluster02 | SUCCESS | rc=0 >> >>> # file: /mnt/raid6-storage/storage >>> trusted.glusterfs.dht=0x00000001000000007ffffffeaaaaaaa7 >>> >>> gluster07 | FAILED | rc=1 >> >>> /mnt/raid6-storage/storage: trusted.glusterfs.dht: No such >>> attributenon-zero return code >>> >>> gluster01 | SUCCESS | rc=0 >> >>> # file: /mnt/raid6-storage/storage >>> trusted.glusterfs.dht=0x0000000100000000555555547ffffffd >>> >>> Here are all of the attr's from the brick: >>> >>> [root at gluster07 ~]# getfattr --absolute-names -m . -d -e hex >>> /mnt/raid6-storage/storage/ >>> # file: /mnt/raid6-storage/storage/ >>> security.selinux=0x756e636f6e66696e65645f753a6f626a6563745f723a756e6c6162656c65645f743a733000 >>> trusted.gfid=0x00000000000000000000000000000001 >>> trusted.glusterfs.6f95525a-94d7-4174-bac4-e1a18fe010a2.xtime=0x5d2dee800001fdf9 >>> trusted.glusterfs.quota.dirty=0x3000 >>> trusted.glusterfs.quota.size.2=0x00001b69498a1400000000000076332e000000000005cd03 >>> trusted.glusterfs.volume-id=0x6f95525a94d74174bac4e1a18fe010a2 >>> >>> >>> And here is the volume information: >>> >>> [root at gluster07 ~]# gluster volume info storage >>> >>> Volume Name: storage >>> Type: Distribute >>> Volume ID: 6f95525a-94d7-4174-bac4-e1a18fe010a2 >>> Status: Started >>> Snapshot Count: 0 >>> Number of Bricks: 7 >>> Transport-type: tcp >>> Bricks: >>> Brick1: 10.0.231.50:/mnt/raid6-storage/storage >>> Brick2: 10.0.231.51:/mnt/raid6-storage/storage >>> Brick3: 10.0.231.52:/mnt/raid6-storage/storage >>> Brick4: 10.0.231.53:/mnt/raid6-storage/storage >>> Brick5: 10.0.231.54:/mnt/raid6-storage/storage >>> Brick6: 10.0.231.55:/mnt/raid6-storage/storage >>> Brick7: 10.0.231.56:/mnt/raid6-storage/storage >>> Options Reconfigured: >>> changelog.changelog: on >>> features.quota-deem-statfs: on >>> features.read-only: off >>> features.inode-quota: on >>> features.quota: on >>> performance.readdir-ahead: on >>> nfs.disable: on >>> geo-replication.indexing: on >>> geo-replication.ignore-pid-check: on >>> transport.address-family: inet >>> >>> Thanks, >>> ?-Matthew >>> _______________________________________________ >>> Gluster-users mailing list >>> Gluster-users at gluster.org <mailto:Gluster-users at gluster.org> >>> https://lists.gluster.org/mailman/listinfo/gluster-users >>> >> >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20190725/a851e0ef/attachment.html>
Nithya Balachandran
2019-Jul-26 07:02 UTC
[Gluster-users] Brick missing trusted.glusterfs.dht xattr
On Fri, 26 Jul 2019 at 01:56, Matthew Benstead <matthewb at uvic.ca> wrote:> Hi Nithya, > > Hmm... I don't remember if I did, but based on what I'm seeing it sounds > like I probably didn't run rebalance or fix-layout. > > It looks like folders that haven't had any new files created have a dht of > 0, while other folders have non-zero values. > > [root at gluster07 ~]# getfattr --absolute-names -m . -d -e hex > /mnt/raid6-storage/storage/ | grep dht > [root at gluster07 ~]# getfattr --absolute-names -m . -d -e hex > /mnt/raid6-storage/storage/home | grep dht > trusted.glusterfs.dht=0x00000000000000000000000000000000 > [root at gluster07 ~]# getfattr --absolute-names -m . -d -e hex > /mnt/raid6-storage/storage/home/matthewb | grep dht > trusted.glusterfs.dht=0x00000001000000004924921a6db6dbc7 > > If I just run the fix-layout command will it re-create all of the dht > values or just the missing ones? >A fix-layout will recalculate the layouts entirely so files all the values will change. No files will be moved. A rebalance will recalculate the layouts like the fix-layout but will also move files to their new locations based on the new layout ranges. This could take a lot of time depending on the number of files/directories on the volume. If you do this, I would recommend that you turn off lookup-optimize until the rebalance is over.> Since the brick is already fairly size balanced could I get away with > running fix-layout but not rebalance? Or would the new dht layout mean > slower accesses since the files may be expected on different bricks? >The first access for a file will be slower. The next one will be faster as the location will be cached in the client's in-memory structures. You may not need to run either a fix-layout or a rebalance if new file creations will be in directories created after the add-brick. Gluster will automatically include all 7 bricks for those directories. Regards, Nithya> Thanks, > -Matthew > > -- > Matthew Benstead > System Administrator > Pacific Climate Impacts Consortium <https://pacificclimate.org/> > University of Victoria, UH1 > PO Box 1800, STN CSC > Victoria, BC, V8W 2Y2 > Phone: +1-250-721-8432 > Email: matthewb at uvic.ca > On 7/24/19 9:30 PM, Nithya Balachandran wrote: > > > > On Wed, 24 Jul 2019 at 22:12, Matthew Benstead <matthewb at uvic.ca> wrote: > >> So looking more closely at the trusted.glusterfs.dht attributes from the >> bricks it looks like they cover the entire range... and there is no range >> left for gluster07. >> >> The first 6 bricks range from 0x00000000 to 0xffffffff - so... is there a >> way to re-calculate what the dht values should be? Each of the bricks >> should have a gap >> >> Gluster05 00000000 -> 2aaaaaa9 >> Gluster06 2aaaaaaa -> 55555553 >> Gluster01 55555554 -> 7ffffffd >> Gluster02 7ffffffe -> aaaaaaa7 >> Gluster03 aaaaaaa8 -> d5555551 >> Gluster04 d5555552 -> ffffffff >> Gluster07 None >> >> If we split the range into 7 servers that would be a gap of about >> 0x24924924 for each server. >> >> Now in terms of the gluster07 brick, about 2 years ago the RAID array the >> brick was stored on became corrupted. I ran the remove-brick force command, >> then provisioned a new server, ran the add-brick command and then restored >> the missing files from backup by copying them back to the main gluster >> mount (not the brick). >> >> > Did you run a rebalance after performing the add-brick? Without a > rebalance/fix-layout , the layout for existing directories on the volume > will not be updated to use the new brick as well. > > That the layout does not include the new brick in the root dir is in > itself is not a problem. Do you create a lot of files directly in the root > of the volume? If yes, you might want to run a rebalance. Otherwise, if you > mostly create files in newly added directories, you can probably ignore > this. You can check the layout for directories on the volume and see if > they incorporate the brick7. > > I would expect a lookup on the root to have set an xattr on the brick with > an empty layout range . The fact that the xattr does not exist at all on > the brick is what I am looking into. > > > It looks like prior to that event this was the layout - which would make >> sense given the equal size of the 7 bricks: >> >> gluster02.pcic.uvic.ca | SUCCESS | rc=0 >> >> # file: /mnt/raid6-storage/storage >> trusted.glusterfs.dht=0x000000010000000048bfff206d1ffe5f >> >> gluster05.pcic.uvic.ca | SUCCESS | rc=0 >> >> # file: /mnt/raid6-storage/storage >> trusted.glusterfs.dht=0x0000000100000000b5dffce0da3ffc1f >> >> gluster04.pcic.uvic.ca | SUCCESS | rc=0 >> >> # file: /mnt/raid6-storage/storage >> trusted.glusterfs.dht=0x0000000100000000917ffda0b5dffcdf >> >> gluster03.pcic.uvic.ca | SUCCESS | rc=0 >> >> # file: /mnt/raid6-storage/storage >> trusted.glusterfs.dht=0x00000001000000006d1ffe60917ffd9f >> >> gluster01.pcic.uvic.ca | SUCCESS | rc=0 >> >> # file: /mnt/raid6-storage/storage >> trusted.glusterfs.dht=0x0000000100000000245fffe048bfff1f >> >> gluster07.pcic.uvic.ca | SUCCESS | rc=0 >> >> # file: /mnt/raid6-storage/storage >> trusted.glusterfs.dht=0x000000010000000000000000245fffdf >> >> gluster06.pcic.uvic.ca | SUCCESS | rc=0 >> >> # file: /mnt/raid6-storage/storage >> trusted.glusterfs.dht=0x0000000100000000da3ffc20ffffffff >> >> Which yields the following: >> >> 00000000 -> 245fffdf Gluster07 >> 245fffe0 -> 48bfff1f Gluster01 >> 48bfff20 -> 6d1ffe5f Gluster02 >> 6d1ffe60 -> 917ffd9f Gluster03 >> 917ffda0 -> b5dffcdf Gluster04 >> b5dffce0 -> da3ffc1f Gluster05 >> da3ffc20 -> ffffffff Gluster06 >> >> Is there some way to get back to this? >> >> Thanks, >> -Matthew >> >> -- >> Matthew Benstead >> System Administrator >> Pacific Climate Impacts Consortium <https://pacificclimate.org/> >> University of Victoria, UH1 >> PO Box 1800, STN CSC >> Victoria, BC, V8W 2Y2 >> Phone: +1-250-721-8432 >> Email: matthewb at uvic.ca >> On 7/18/19 7:20 AM, Matthew Benstead wrote: >> >> Hi Nithya, >> >> No - it was added about a year and a half ago. I have tried re-mounting >> the volume on the server, but it didn't add the attr: >> >> [root at gluster07 ~]# umount /storage/ >> [root at gluster07 ~]# cat /etc/fstab | grep "/storage" >> 10.0.231.56:/storage /storage glusterfs >> defaults,log-level=WARNING,backupvolfile-server=10.0.231.51 0 0 >> [root at gluster07 ~]# mount /storage/ >> [root at gluster07 ~]# df -h /storage/ >> Filesystem Size Used Avail Use% Mounted on >> 10.0.231.56:/storage 255T 194T 62T 77% /storage >> [root at gluster07 ~]# getfattr --absolute-names -m . -d -e hex >> /mnt/raid6-storage/storage/ >> # file: /mnt/raid6-storage/storage/ >> >> security.selinux=0x756e636f6e66696e65645f753a6f626a6563745f723a756e6c6162656c65645f743a733000 >> trusted.gfid=0x00000000000000000000000000000001 >> >> trusted.glusterfs.6f95525a-94d7-4174-bac4-e1a18fe010a2.xtime=0x5d307baa00023ec0 >> trusted.glusterfs.quota.dirty=0x3000 >> >> trusted.glusterfs.quota.size.2=0x00001b71d5279e000000000000763e32000000000005cd53 >> trusted.glusterfs.volume-id=0x6f95525a94d74174bac4e1a18fe010a2 >> >> Thanks, >> -Matthew >> >> On 7/17/19 10:04 PM, Nithya Balachandran wrote: >> >> Hi Matthew, >> >> Was this node/brick added to the volume recently? If yes, try mounting >> the volume on a fresh mount point - that should create the xattr on this as >> well. >> >> Regards, >> Nithya >> >> On Wed, 17 Jul 2019 at 21:01, Matthew Benstead <matthewb at uvic.ca> wrote: >> >>> Hello, >>> >>> I've just noticed one brick in my 7 node distribute volume is missing >>> the trusted.glusterfs.dht xattr...? How can I fix this? >>> >>> I'm running glusterfs-5.3-2.el7.x86_64 on CentOS 7. >>> >>> All of the other nodes are fine, but gluster07 from the list below does >>> not have the attribute. >>> >>> $ ansible -i hosts gluster-servers[0:6] ... -m shell -a "getfattr -m . >>> --absolute-names -n trusted.glusterfs.dht -e hex >>> /mnt/raid6-storage/storage" >>> ... >>> gluster05 | SUCCESS | rc=0 >> >>> # file: /mnt/raid6-storage/storage >>> trusted.glusterfs.dht=0x0000000100000000000000002aaaaaa9 >>> >>> gluster03 | SUCCESS | rc=0 >> >>> # file: /mnt/raid6-storage/storage >>> trusted.glusterfs.dht=0x0000000100000000aaaaaaa8d5555551 >>> >>> gluster04 | SUCCESS | rc=0 >> >>> # file: /mnt/raid6-storage/storage >>> trusted.glusterfs.dht=0x0000000100000000d5555552ffffffff >>> >>> gluster06 | SUCCESS | rc=0 >> >>> # file: /mnt/raid6-storage/storage >>> trusted.glusterfs.dht=0x00000001000000002aaaaaaa55555553 >>> >>> gluster02 | SUCCESS | rc=0 >> >>> # file: /mnt/raid6-storage/storage >>> trusted.glusterfs.dht=0x00000001000000007ffffffeaaaaaaa7 >>> >>> gluster07 | FAILED | rc=1 >> >>> /mnt/raid6-storage/storage: trusted.glusterfs.dht: No such >>> attributenon-zero return code >>> >>> gluster01 | SUCCESS | rc=0 >> >>> # file: /mnt/raid6-storage/storage >>> trusted.glusterfs.dht=0x0000000100000000555555547ffffffd >>> >>> Here are all of the attr's from the brick: >>> >>> [root at gluster07 ~]# getfattr --absolute-names -m . -d -e hex >>> /mnt/raid6-storage/storage/ >>> # file: /mnt/raid6-storage/storage/ >>> >>> security.selinux=0x756e636f6e66696e65645f753a6f626a6563745f723a756e6c6162656c65645f743a733000 >>> trusted.gfid=0x00000000000000000000000000000001 >>> >>> trusted.glusterfs.6f95525a-94d7-4174-bac4-e1a18fe010a2.xtime=0x5d2dee800001fdf9 >>> trusted.glusterfs.quota.dirty=0x3000 >>> >>> trusted.glusterfs.quota.size.2=0x00001b69498a1400000000000076332e000000000005cd03 >>> trusted.glusterfs.volume-id=0x6f95525a94d74174bac4e1a18fe010a2 >>> >>> >>> And here is the volume information: >>> >>> [root at gluster07 ~]# gluster volume info storage >>> >>> Volume Name: storage >>> Type: Distribute >>> Volume ID: 6f95525a-94d7-4174-bac4-e1a18fe010a2 >>> Status: Started >>> Snapshot Count: 0 >>> Number of Bricks: 7 >>> Transport-type: tcp >>> Bricks: >>> Brick1: 10.0.231.50:/mnt/raid6-storage/storage >>> Brick2: 10.0.231.51:/mnt/raid6-storage/storage >>> Brick3: 10.0.231.52:/mnt/raid6-storage/storage >>> Brick4: 10.0.231.53:/mnt/raid6-storage/storage >>> Brick5: 10.0.231.54:/mnt/raid6-storage/storage >>> Brick6: 10.0.231.55:/mnt/raid6-storage/storage >>> Brick7: 10.0.231.56:/mnt/raid6-storage/storage >>> Options Reconfigured: >>> changelog.changelog: on >>> features.quota-deem-statfs: on >>> features.read-only: off >>> features.inode-quota: on >>> features.quota: on >>> performance.readdir-ahead: on >>> nfs.disable: on >>> geo-replication.indexing: on >>> geo-replication.ignore-pid-check: on >>> transport.address-family: inet >>> >>> Thanks, >>> -Matthew >>> _______________________________________________ >>> Gluster-users mailing list >>> Gluster-users at gluster.org >>> https://lists.gluster.org/mailman/listinfo/gluster-users >>> >> >> >> >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20190726/9f3f8980/attachment.html>