On Sun, Mar 22, 2015 at 02:59:53PM +0000, Jason Hilton wrote:> Thank you for the quick reply! I didn't expect to see any response on > a Sunday. I did as you suggested and found some messages stating > that the address and port were failing to bind because it was already > in use. It turned out that the NFS service was running and interfered > with glusterd. I was intending to share my gluster volumes via NFS > and I thought I had read that as of V3, gluster exported NFS shares by > default, so I had started the service. Does gluster provide its own > NFS services?Yes, Gluster comes indeed with its own NFS-server. You should not start any NFS-services, Gluster takes care of starting them. The only service that you need to have running (or activated for systemd environments), is rpcbind. Once your volume has been created and started, you should be able to see that there is a NFS-server running with this command: # gluster volume status And, with 'showmount -e' the volme should be listed as an export. Cheers, Niels> > *************************************************************** > Jason Hilton > Director of Technology Development > 601 Madison Street, Suite 400 > Alexandria, VA 22314 > jason.hilton at aaae.org > Desk: 703.824.0500x167 > FAX: 703.578.4952 > > AAAE Tech support: > IET at aaae.org > 703.797.2555, opt. 2 > *************************************************************** > > > -----Original Message----- > From: Niels de Vos [mailto:ndevos at redhat.com] > Sent: Sunday, March 22, 2015 10:13 AM > To: Jason Hilton > Cc: 'gluster-users at gluster.org' > Subject: Re: [Gluster-users] Volume creation time? > > On Sun, Mar 22, 2015 at 01:34:24PM +0000, Jason Hilton wrote: > > Hi- > > I'm new to GlusterFS and I have been trying to set up a gluster > > volume. The volume is 150 TB. I started the create volume command on > > Friday morning and it has not yet completed. Since I have no prior > > experience with GlusterFS, is this an expected duration? The server > > is no power house, a pair of older Xeon Quad core processors at 2 GHz > > and only 4 GB of RAM. TOP shows very little processor usage, but > > IOTOP shows some disk I/O. I don't mind waiting it out, I just want > > to be sure that the process is still proceeding. Is there a way to > > monitor Gluster volume creation progress? > > Volume creation should be very fast, there is not a lot to do for Gluster to create a volume. A couple of seconds should be sufficient. > > Check the /var/log/glusterfs/etc-*.log to see if there are any errors listed there. > > HTH, > Niels
So I have been trying to get this going and the volume status command shows that the "NFS Server on localhost" is offline, port and pid are "N/A". I have double checked everything and NFS is disabled on start up an are not currently running. The showmount command returns "clnt_create: RPC: Program not registered" Any ideas? Thanks again! -----Original Message----- From: Niels de Vos [mailto:ndevos at redhat.com] Sent: Sunday, March 22, 2015 11:45 AM To: Jason Hilton Cc: 'gluster-users at gluster.org' Subject: Re: [Gluster-users] Volume creation time? On Sun, Mar 22, 2015 at 02:59:53PM +0000, Jason Hilton wrote:> Thank you for the quick reply! I didn't expect to see any response on > a Sunday. I did as you suggested and found some messages stating > that the address and port were failing to bind because it was already > in use. It turned out that the NFS service was running and interfered > with glusterd. I was intending to share my gluster volumes via NFS > and I thought I had read that as of V3, gluster exported NFS shares by > default, so I had started the service. Does gluster provide its own > NFS services?Yes, Gluster comes indeed with its own NFS-server. You should not start any NFS-services, Gluster takes care of starting them. The only service that you need to have running (or activated for systemd environments), is rpcbind. Once your volume has been created and started, you should be able to see that there is a NFS-server running with this command: # gluster volume status And, with 'showmount -e' the volme should be listed as an export. Cheers, Niels> > *************************************************************** > Jason Hilton > Director of Technology Development > 601 Madison Street, Suite 400 > Alexandria, VA 22314 > jason.hilton at aaae.org > Desk: 703.824.0500x167 > FAX: 703.578.4952 > > AAAE Tech support: > IET at aaae.org > 703.797.2555, opt. 2 > *************************************************************** > > > -----Original Message----- > From: Niels de Vos [mailto:ndevos at redhat.com] > Sent: Sunday, March 22, 2015 10:13 AM > To: Jason Hilton > Cc: 'gluster-users at gluster.org' > Subject: Re: [Gluster-users] Volume creation time? > > On Sun, Mar 22, 2015 at 01:34:24PM +0000, Jason Hilton wrote: > > Hi- > > I'm new to GlusterFS and I have been trying to set up a gluster > > volume. The volume is 150 TB. I started the create volume command > > on Friday morning and it has not yet completed. Since I have no > > prior experience with GlusterFS, is this an expected duration? The > > server is no power house, a pair of older Xeon Quad core processors > > at 2 GHz and only 4 GB of RAM. TOP shows very little processor > > usage, but IOTOP shows some disk I/O. I don't mind waiting it out, > > I just want to be sure that the process is still proceeding. Is > > there a way to monitor Gluster volume creation progress? > > Volume creation should be very fast, there is not a lot to do for Gluster to create a volume. A couple of seconds should be sufficient. > > Check the /var/log/glusterfs/etc-*.log to see if there are any errors listed there. > > HTH, > Niels
Also, my OS is CentOS 7 and gluster is version 3.6.2, if that helps. *************************************************************** Jason Hilton Director of Technology Development 601 Madison Street, Suite 400 Alexandria, VA 22314 jason.hilton at aaae.org Desk: 703.824.0500x167 FAX: 703.578.4952 AAAE Tech support: IET at aaae.org 703.797.2555, opt. 2 *************************************************************** -----Original Message----- From: Niels de Vos [mailto:ndevos at redhat.com] Sent: Sunday, March 22, 2015 11:45 AM To: Jason Hilton Cc: 'gluster-users at gluster.org' Subject: Re: [Gluster-users] Volume creation time? On Sun, Mar 22, 2015 at 02:59:53PM +0000, Jason Hilton wrote:> Thank you for the quick reply! I didn't expect to see any response on > a Sunday. I did as you suggested and found some messages stating > that the address and port were failing to bind because it was already > in use. It turned out that the NFS service was running and interfered > with glusterd. I was intending to share my gluster volumes via NFS > and I thought I had read that as of V3, gluster exported NFS shares by > default, so I had started the service. Does gluster provide its own > NFS services?Yes, Gluster comes indeed with its own NFS-server. You should not start any NFS-services, Gluster takes care of starting them. The only service that you need to have running (or activated for systemd environments), is rpcbind. Once your volume has been created and started, you should be able to see that there is a NFS-server running with this command: # gluster volume status And, with 'showmount -e' the volme should be listed as an export. Cheers, Niels> > *************************************************************** > Jason Hilton > Director of Technology Development > 601 Madison Street, Suite 400 > Alexandria, VA 22314 > jason.hilton at aaae.org > Desk: 703.824.0500x167 > FAX: 703.578.4952 > > AAAE Tech support: > IET at aaae.org > 703.797.2555, opt. 2 > *************************************************************** > > > -----Original Message----- > From: Niels de Vos [mailto:ndevos at redhat.com] > Sent: Sunday, March 22, 2015 10:13 AM > To: Jason Hilton > Cc: 'gluster-users at gluster.org' > Subject: Re: [Gluster-users] Volume creation time? > > On Sun, Mar 22, 2015 at 01:34:24PM +0000, Jason Hilton wrote: > > Hi- > > I'm new to GlusterFS and I have been trying to set up a gluster > > volume. The volume is 150 TB. I started the create volume command > > on Friday morning and it has not yet completed. Since I have no > > prior experience with GlusterFS, is this an expected duration? The > > server is no power house, a pair of older Xeon Quad core processors > > at 2 GHz and only 4 GB of RAM. TOP shows very little processor > > usage, but IOTOP shows some disk I/O. I don't mind waiting it out, > > I just want to be sure that the process is still proceeding. Is > > there a way to monitor Gluster volume creation progress? > > Volume creation should be very fast, there is not a lot to do for Gluster to create a volume. A couple of seconds should be sufficient. > > Check the /var/log/glusterfs/etc-*.log to see if there are any errors listed there. > > HTH, > Niels