Hi,
I have upgraded from FreeBSD 10.3 to 11 RC1 on my Lenovo W450 with Intel
Centrino Ultimate-N 6300
After upgrade and a last reboot the iwn driver gets loaded but no iwn0
interface pops up. Doing a 'service netif restart' crashes the machine
and a core is written.
I have attached the output of the dmesg command. If somebody needs the
core, I can upload it somewhere and give you the download link.
Please tell me how I can help you guys.
Cheers,
Stefan
-------------- next part --------------
tun0: link state changed to DOWN
wlan0: link state changed to DOWN
lagg0: link state changed to DOWN
wlan0: link state changed to UP
lagg0: link state changed to UP
pid 97228 (wine), uid 1001: exited on signal 10 (core dumped)
wlan0: link state changed to DOWN
lagg0: link state changed to DOWN
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 0 0 0 0 done
All buffers synced.
Uptime: 10h16m41s
GEOM_ELI: Device ada1p1.eli destroyed.
GEOM_ELI: Detached ada1p1.eli on last close.
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.3-RELEASE-p4 #0: Sat May 28 12:23:44 UTC 2016
root at amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (2394.61-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a
Stepping=9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7fbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 32887021568 (31363 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TP-G5 >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
random: <Software, Yarrow> initialized
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS> on motherboard
acpi0: <LENOVO TP-G5> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x5000-0x507f mem
0xf2000000-0xf2ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at
device 0.0 on pci1
nvidia0: <Quadro K2000M> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
hdac0: <NVIDIA (0x0e1b) HDA Controller> mem 0xf3000000-0xf3003fff irq 17
at device 0.1 on pci1
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf5320000-0xf532ffff
irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x6040-0x605f mem
0xf5300000-0xf531ffff,0xf533b000-0xf533bfff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 3c:97:0e:c3:c9:d0
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf533a000-0xf533a3ff
irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac1: <Intel Panther Point HDA Controller> mem 0xf5330000-0xf5333fff irq
22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
sdhci_pci0: <RICOH R5CE823 SD> mem 0xf4a01000-0xf4a010ff irq 16 at device
0.0 on pci2
sdhci_pci0: 1 slot(s) allocated
pci2: <serial bus, FireWire> at device 0.3 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
iwn0: <Intel Centrino Ultimate-N 6300> mem 0xf4900000-0xf4901fff irq 17 at
device 0.0 on pci3
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib4
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf5339000-0xf53393ff
irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port
0x6068-0x606f,0x6074-0x6077,0x6060-0x6067,0x6070-0x6073,0x6020-0x603f mem
0xf5338000-0xf53387ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA (0x0042) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0042) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm1: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 6 on hdaa0
pcm2: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 7 on hdaa0
hdacc1: <Realtek ALC269 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc1
pcm3: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,21 and 24 on hdaa1
pcm4: <Realtek ALC269 (Internal Analog Mic)> at nid 18 on hdaa1
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ugen2.1: <Intel> at usbus2
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <0x8086> at usbus0
uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ses0 at ahciem0 bus 0 scbus3 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Samsung SSD 840 Series DXT08B0Q> ACS-2 ATA SATA 3.x device
ada0: Serial Number S14LNEAD801416V
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
ada0: quirks=0x1<4K>
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <Samsung SSD 840 EVO 1TB EXT0BB6Q> ACS-2 ATA SATA 3.x device
ada1: Serial Number S1D9NSAF405493W
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
ada1: quirks=0x1<4K>
ada1: Previously was known as ad6
SMP: AP CPU #1 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #7 Launched!
Timecounter "TSC-low" frequency 1197307492 Hz quality 1000
Root mount waiting for: usbus2 usbus1 usbus0
uhub2: 8 ports with 8 removable, self powered
ugen0.2: <Lenovo> at usbus0
Root mount waiting for: usbus2 usbus1
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
Root mount waiting for: usbus2 usbus1
ugen2.2: <vendor 0x8087> at usbus2
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on
usbus2
ugen1.2: <vendor 0x8087> at usbus1
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on
usbus1
uhub4: 6 ports with 6 removable, self powered
Root mount waiting for: usbus2 usbus1
uhub3: 8 ports with 8 removable, self powered
ugen1.3: <Auth> at usbus1
ugen2.3: <Logitech> at usbus2
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/24.00, addr 3> on
usbus2
kbd2 at ukbd0
ugen1.4: <Broadcom Corp> at usbus1
Root mount waiting for: usbus1
ugen1.5: <Chicony Electronics Co., Ltd.> at usbus1
Trying to mount root from zfs:zroot/ROOT/FreeBSD11RC1 []...
GEOM_ELI: Device ada1p1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: hardware
wlan0: Ethernet address: 3c:97:0e:c3:c9:d0
lagg0: IPv6 addresses on em0 have been removed before adding it as a member to
prevent IPv6 address scope violation.
lagg0: link state changed to DOWN
lagg0: IPv6 addresses on wlan0 have been removed before adding it as a member to
prevent IPv6 address scope violation.
umodem0: <H5321 gw Mobile Broadband Modem> on usbus0
umodem0: data interface 2, has CM over data, has break
umodem1: <H5321 gw Mobile Broadband Data Modem> on usbus0
umodem1: data interface 4, has CM over data, has break
umodem2: <H5321 gw Mobile Broadband GPS Port> on usbus0
umodem2: data interface 10, has CM over data, has break
cdce0: <Ericsson H5321 gw> on usbus0
ue0: <USB Ethernet> on cdce0
ue0: Ethernet address: 02:15:e0:ec:01:00
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/24.00, addr 3> on usbus2
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/24.00, addr 3> on
usbus2
ubt0: <Broadcom Corp BCM20702A0, rev 2.00/1.12, addr 4> on usbus1
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
wlan0: link state changed to UP
lagg0: link state changed to UP
link_elf_obj: symbol linux_sysent undefined
linker_load_file: Unsupported file type
ACPI Warning: \134_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found
[Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found
[Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found
[Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found
[Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found
[Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found
[Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found
[Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found
[Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Error: Field [TBF3] at 389120 exceeds Buffer [NULL] size 368640 (bits)
(20150515/dsopcode-247)
ACPI Error: Method parse/execution failed [\134_SB_.PCI0.PEG_.VID_.GETB] (Node
0xfffff8000672fa80), AE_AML_BUFFER_LIMIT (20150515/psparse-552)
ACPI Error: Method parse/execution failed [\134_SB_.PCI0.PEG_.VID_._ROM] (Node
0xfffff8000672fac0), AE_AML_BUFFER_LIMIT (20150515/psparse-552)
ACPI Warning: \134_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found
[Buffer], ACPI requires [Package] (20150515/nsarguments-97)
ACPI Warning: \134_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found
[Buffer], ACPI requires [Package] (20150515/nsarguments-97)
iwn0: iwn_intr: fatal firmware error
firmware error log:
error type = "NMI_INTERRUPT_WDG" (0x00000004)
program counter = 0x000006B4
source line = 0x0000045F
error data = 0x0000000207030000
branch link = 0x0000067A0000071A
interrupt link = 0x0000153200000A42
time = 1220260558
driver status:
tx ring 0: qid=0 cur=70 queued=0
tx ring 1: qid=1 cur=0 queued=0
tx ring 2: qid=2 cur=15 queued=0
tx ring 3: qid=3 cur=7 queued=0
tx ring 4: qid=4 cur=247 queued=0
tx ring 5: qid=5 cur=0 queued=0
tx ring 6: qid=6 cur=0 queued=0
tx ring 7: qid=7 cur=0 queued=0
tx ring 8: qid=8 cur=0 queued=0
tx ring 9: qid=9 cur=0 queued=0
tx ring 10: qid=10 cur=170 queued=0
tx ring 11: qid=11 cur=0 queued=0
tx ring 12: qid=12 cur=0 queued=0
tx ring 13: qid=13 cur=0 queued=0
tx ring 14: qid=14 cur=0 queued=0
tx ring 15: qid=15 cur=0 queued=0
tx ring 16: qid=16 cur=0 queued=0
tx ring 17: qid=17 cur=0 queued=0
tx ring 18: qid=18 cur=0 queued=0
tx ring 19: qid=19 cur=0 queued=0
rx ring: cur=20
ifa_del_loopback_route: deletion failed: 48
lagg0: link state changed to DOWN
wlan0: link state changed to DOWN
lagg0: link state changed to DOWN
wlan0: Ethernet address: 3c:97:0e:c3:c9:d0
lagg0: IPv6 addresses on em0 have been removed before adding it as a member to
prevent IPv6 address scope violation.
lagg0: IPv6 addresses on wlan0 have been removed before adding it as a member to
prevent IPv6 address scope violation.
wlan0: link state changed to UP
lagg0: link state changed to UP
CPU0: local APIC error 0x80
CPU0: local APIC error 0x80
iwn0: iwn_intr: fatal firmware error
firmware error log:
error type = "NMI_INTERRUPT_WDG" (0x00000004)
program counter = 0x000006B4
source line = 0x0000045F
error data = 0x0000000207030000
branch link = 0x0000067A0000071A
interrupt link = 0x0000153200000A34
time = 3762201435
driver status:
tx ring 0: qid=0 cur=143 queued=0
tx ring 1: qid=1 cur=0 queued=0
tx ring 2: qid=2 cur=39 queued=0
tx ring 3: qid=3 cur=10 queued=0
tx ring 4: qid=4 cur=85 queued=0
tx ring 5: qid=5 cur=0 queued=0
tx ring 6: qid=6 cur=0 queued=0
tx ring 7: qid=7 cur=0 queued=0
tx ring 8: qid=8 cur=0 queued=0
tx ring 9: qid=9 cur=0 queued=0
tx ring 10: qid=10 cur=0 queued=0
tx ring 11: qid=11 cur=49 queued=3
tx ring 12: qid=12 cur=0 queued=0
tx ring 13: qid=13 cur=0 queued=0
tx ring 14: qid=14 cur=0 queued=0
tx ring 15: qid=15 cur=0 queued=0
tx ring 16: qid=16 cur=0 queued=0
tx ring 17: qid=17 cur=0 queued=0
tx ring 18: qid=18 cur=0 queued=0
tx ring 19: qid=19 cur=0 queued=0
rx ring: cur=43
ifa_del_loopback_route: deletion failed: 48
lagg0: link state changed to DOWN
wlan0: link state changed to DOWN
lagg0: link state changed to DOWN
wlan0: Ethernet address: 3c:97:0e:c3:c9:d0
lagg0: IPv6 addresses on em0 have been removed before adding it as a member to
prevent IPv6 address scope violation.
lagg0: IPv6 addresses on wlan0 have been removed before adding it as a member to
prevent IPv6 address scope violation.
wlan0: link state changed to UP
lagg0: link state changed to UP
wlan0: link state changed to DOWN
lagg0: link state changed to DOWN
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 0 0 0 done
All buffers synced.
Uptime: 1h59m17s
GEOM_ELI: Device ada1p1.eli destroyed.
GEOM_ELI: Detached ada1p1.eli on last close.
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-RC1 #0 r303979: Fri Aug 12 02:28:24 UTC 2016
root at releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM
3.8.0)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (2394.61-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a
Stepping=9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7fbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 32889651200 (31366 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TP-G5 >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff8101b920, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
acpi0: <LENOVO TP-G5> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x5000-0x507f mem
0xf2000000-0xf2ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at
device 0.0 on pci1
vgapci0: Boot video device
hdac0: <NVIDIA (0x0e1b) HDA Controller> mem 0xf3000000-0xf3003fff irq 17
at device 0.1 on pci1
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf5320000-0xf532ffff
irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x6040-0x605f mem
0xf5300000-0xf531ffff,0xf533b000-0xf533bfff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 3c:97:0e:c3:c9:d0
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf533a000-0xf533a3ff
irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac1: <Intel Panther Point HDA Controller> mem 0xf5330000-0xf5333fff irq
22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib2: [GIANT-LOCKED]
pci2: <ACPI PCI bus> on pcib2
sdhci_pci0: <RICOH R5CE823 SD> mem 0xf4a01000-0xf4a010ff irq 16 at device
0.0 on pci2
sdhci_pci0: 1 slot(s) allocated
pci2: <serial bus, FireWire> at device 0.3 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
iwn0: <Intel Centrino Ultimate-N 6300> mem 0xf4900000-0xf4901fff irq 17 at
device 0.0 on pci3
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib4: [GIANT-LOCKED]
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf5339000-0xf53393ff
irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port
0x6068-0x606f,0x6074-0x6077,0x6060-0x6067,0x6070-0x6073,0x6020-0x603f mem
0xf5338000-0xf53387ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
nvme cam probe device init
hdacc0: <NVIDIA (0x0042) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0042) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm1: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 6 on hdaa0
pcm2: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 7 on hdaa0
hdacc1: <Realtek ALC269 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc1
pcm3: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,21 and 24 on hdaa1
pcm4: <Realtek ALC269 (Internal Analog Mic)> at nid 18 on hdaa1
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Samsung SSD 840 Series DXT08B0Q> ACS-2 ATA SATA 3.x device
ada0: Serial Number S14LNEAD801416V
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <Samsung SSD 840 EVO 1TB EXT0BB6Q> ACS-2 ATA SATA 3.x device
ada1: Serial Number S1D9NSAF405493W
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
ada1: quirks=0x3<4K,NCQ_TRIM_BROKEN>
ses0 at ahciem0 bus 0 scbus3 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
SMP: AP CPU #1 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1197305298 Hz quality 1000
Trying to mount root from zfs:zroot/ROOT/FreeBSD11RC1 []...
Root mount waiting for: usbus2 usbus1 usbus0
uhub0: 8 ports with 8 removable, self powered
ugen0.2: <Lenovo> at usbus0
uhub1: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
Root mount waiting for: usbus2 usbus1
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on
usbus1
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on
usbus2
Root mount waiting for: usbus2 usbus1
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen1.3: <Auth> at usbus1
ugen2.3: <Logitech> at usbus2
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/24.00, addr 3> on
usbus2
kbd2 at ukbd0
ugen1.4: <Broadcom Corp> at usbus1
Root mount waiting for: usbus1
ugen1.5: <Chicony Electronics Co., Ltd.> at usbus1
GEOM_ELI: Device ada1p1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: hardware
lagg0: IPv6 addresses on em0 have been removed before adding it as a member to
prevent IPv6 address scope violation.
lagg0: link state changed to DOWN
umodem0: <H5321 gw Mobile Broadband Modem> on usbus0
umodem0: data interface 2, has CM over data, has break
umodem1: <H5321 gw Mobile Broadband Data Modem> on usbus0
umodem1: data interface 4, has CM over data, has break
umodem2: <H5321 gw Mobile Broadband GPS Port> on usbus0
umodem2: data interface 10, has CM over data, has break
cdce0: <Ericsson H5321 gw> on usbus0
ue0: <USB Ethernet> on cdce0
ue0: Ethernet address: 02:15:e0:ec:01:00
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/24.00, addr 3> on usbus2
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/24.00, addr 3> on
usbus2
KLD vboxdrv.ko: depends on kernel - not available or version mismatch
linker_load_file: Unsupported file type
ubt0: <Broadcom Corp BCM20702A0, rev 2.00/1.12, addr 4> on usbus1
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
KLD linux_adobe.ko: depends on kernel - not available or version mismatch
linker_load_file: Unsupported file type
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 0 0 0 0 done
All buffers synced.
Uptime: 16m8s
GEOM_ELI: Device ada1p1.eli destroyed.
GEOM_ELI: Detached ada1p1.eli on last close.
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-RC1 #0 r303979: Fri Aug 12 02:28:24 UTC 2016
root at releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM
3.8.0)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (2394.61-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a
Stepping=9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7fbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 32889651200 (31366 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TP-G5 >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff8101b920, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
acpi0: <LENOVO TP-G5> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x5000-0x507f mem
0xf2000000-0xf2ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at
device 0.0 on pci1
vgapci0: Boot video device
hdac0: <NVIDIA (0x0e1b) HDA Controller> mem 0xf3000000-0xf3003fff irq 17
at device 0.1 on pci1
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf5320000-0xf532ffff
irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x6040-0x605f mem
0xf5300000-0xf531ffff,0xf533b000-0xf533bfff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 3c:97:0e:c3:c9:d0
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf533a000-0xf533a3ff
irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac1: <Intel Panther Point HDA Controller> mem 0xf5330000-0xf5333fff irq
22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib2: [GIANT-LOCKED]
pci2: <ACPI PCI bus> on pcib2
sdhci_pci0: <RICOH R5CE823 SD> mem 0xf4a01000-0xf4a010ff irq 16 at device
0.0 on pci2
sdhci_pci0: 1 slot(s) allocated
pci2: <serial bus, FireWire> at device 0.3 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
iwn0: <Intel Centrino Ultimate-N 6300> mem 0xf4900000-0xf4901fff irq 17 at
device 0.0 on pci3
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib4: [GIANT-LOCKED]
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf5339000-0xf53393ff
irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port
0x6068-0x606f,0x6074-0x6077,0x6060-0x6067,0x6070-0x6073,0x6020-0x603f mem
0xf5338000-0xf53387ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
nvme cam probe device init
hdacc0: <NVIDIA (0x0042) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0042) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm1: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 6 on hdaa0
pcm2: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 7 on hdaa0
hdacc1: <Realtek ALC269 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc1
pcm3: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,21 and 24 on hdaa1
pcm4: <Realtek ALC269 (Internal Analog Mic)> at nid 18 on hdaa1
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Samsung SSD 840 Series DXT08B0Q> ACS-2 ATA SATA 3.x device
ada0: Serial Number S14LNEAD801416V
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <Samsung SSD 840 EVO 1TB EXT0BB6Q> ACS-2 ATA SATA 3.x device
ada1: Serial Number S1D9NSAF405493W
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
ada1: quirks=0x3<4K,NCQ_TRIM_BROKEN>
ses0 at ahciem0 bus 0 scbus3 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
SMP: AP CPU #1 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #7 Launched!
Timecounter "TSC-low" frequency 1197305780 Hz quality 1000
Trying to mount root from zfs:zroot/ROOT/FreeBSD11RC1 []...
Root mount waiting for: usbus2 usbus1 usbus0
uhub0: 8 ports with 8 removable, self powered
ugen0.2: <Lenovo> at usbus0
uhub1: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
Root mount waiting for: usbus2 usbus1
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on
usbus1
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on
usbus2
uhub3: 6 ports with 6 removable, self powered
Root mount waiting for: usbus2 usbus1
uhub4: 8 ports with 8 removable, self powered
ugen1.3: <Auth> at usbus1
ugen2.3: <Logitech> at usbus2
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/24.00, addr 3> on
usbus2
kbd2 at ukbd0
ugen1.4: <Broadcom Corp> at usbus1
Root mount waiting for: usbus1
ugen1.5: <Chicony Electronics Co., Ltd.> at usbus1
GEOM_ELI: Device ada1p1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: hardware
wlan0: Ethernet address: 3c:a9:f4:5a:a1:28
iwn0: iwn_read_firmware: ucode rev=0x09dd0401
lagg0: IPv6 addresses on em0 have been removed before adding it as a member to
prevent IPv6 address scope violation.
lagg0: link state changed to DOWN
lagg0: IPv6 addresses on wlan0 have been removed before adding it as a member to
prevent IPv6 address scope violation.
iwn0: iwn_read_firmware: ucode rev=0x09dd0401
wlan0: link state changed to UP
lagg0: link state changed to UP
umodem0: <H5321 gw Mobile Broadband Modem> on usbus0
umodem0: data interface 2, has CM over data, has break
umodem1: <H5321 gw Mobile Broadband Data Modem> on usbus0
umodem1: data interface 4, has CM over data, has break
umodem2: <H5321 gw Mobile Broadband GPS Port> on usbus0
umodem2: data interface 10, has CM over data, has break
cdce0: <Ericsson H5321 gw> on usbus0
ue0: <USB Ethernet> on cdce0
ue0: Ethernet address: 02:15:e0:ec:01:00
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/24.00, addr 3> on usbus2
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/24.00, addr 3> on
usbus2
ubt0: <Broadcom Corp BCM20702A0, rev 2.00/1.12, addr 4> on usbus1
wlan0: link state changed to DOWN
lagg0: link state changed to DOWN
iwn0: device timeout
iwn0: iwn_read_firmware: ucode rev=0x09dd0401
iwn0: scan timeout
iwn0: iwn_read_firmware: ucode rev=0x09dd0401
wlan0: link state changed to UP
lagg0: link state changed to UP
wlan0: link state changed to DOWN
lagg0: link state changed to DOWN
wlan0: link state changed to UP
lagg0: link state changed to UP
wlan0: link state changed to DOWN
lagg0: link state changed to DOWN
wlan0: link state changed to UP
lagg0: link state changed to UP
wlan0: link state changed to DOWN
lagg0: link state changed to DOWN
wlan0: link state changed to UP
lagg0: link state changed to UP
wlan0: link state changed to DOWN
lagg0: link state changed to DOWN
wlan0: link state changed to UP
lagg0: link state changed to UP
wlan0: link state changed to DOWN
lagg0: link state changed to DOWN
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
KLD vboxdrv.ko: depends on kernel - not available or version mismatch
linker_load_file: Unsupported file type
KLD linux_adobe.ko: depends on kernel - not available or version mismatch
linker_load_file: Unsupported file type
wlan0: link state changed to UP
lagg0: link state changed to UP
wlan0: link state changed to DOWN
lagg0: link state changed to DOWN
wlan0: link state changed to UP
lagg0: link state changed to UP
wlan0: link state changed to DOWN
lagg0: link state changed to DOWN
ifa_maintain_loopback_route: deletion failed for interface lo0: 48
wlan0: Ethernet address: 3c:a9:f4:5a:a1:28
lagg0: IPv6 addresses on em0 have been removed before adding it as a member to
prevent IPv6 address scope violation.
lagg0: link state changed to DOWN
Fatal trap 12: page fault while in kernel mode
cpuid = 6; apic id = 06
fault virtual address = 0x44
fault code = supervisor write data, page not present
instruction pointer = 0x20:0xffffffff80bd6f0e
stack pointer = 0x28:0xfffffe06983cf5c0
frame pointer = 0x28:0xfffffe06983cf5e0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 4979 (ifconfig)
trap number = 12
panic: page fault
cpuid = 6
KDB: stack backtrace:
#0 0xffffffff80b218f7 at kdb_backtrace+0x67
#1 0xffffffff80ad9322 at vpanic+0x182
#2 0xffffffff80ad9193 at panic+0x43
#3 0xffffffff80f9fd31 at trap_fatal+0x351
#4 0xffffffff80f9ff23 at trap_pfault+0x1e3
#5 0xffffffff80f9f4cc at trap+0x26c
#6 0xffffffff80f824a1 at calltrap+0x8
#7 0xffffffff80d18753 at in6_ifattach+0x513
#8 0xffffffff80bdb9bb at ifioctl+0x120b
#9 0xffffffff80b40634 at kern_ioctl+0x2d4
#10 0xffffffff80b402f1 at sys_ioctl+0x171
#11 0xffffffff80fa068e at amd64_syscall+0x4ce
#12 0xffffffff80f8278b at Xfast_syscall+0xfb
Uptime: 6m52s
Dumping 1441 out of 32331
MB:..2%..12%..22%..32%..42%..52%..62%..72%..82%..92%Copyright (c) 1992-2016 The
FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-RC1 #0 r303979: Fri Aug 12 02:28:24 UTC 2016
root at releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM
3.8.0)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (2394.61-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a
Stepping=9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7fbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 32889651200 (31366 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TP-G5 >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff8101b920, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
acpi0: <LENOVO TP-G5> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x5000-0x507f mem
0xf2000000-0xf2ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at
device 0.0 on pci1
vgapci0: Boot video device
hdac0: <NVIDIA (0x0e1b) HDA Controller> mem 0xf3000000-0xf3003fff irq 17
at device 0.1 on pci1
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf5320000-0xf532ffff
irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x6040-0x605f mem
0xf5300000-0xf531ffff,0xf533b000-0xf533bfff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 3c:97:0e:c3:c9:d0
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf533a000-0xf533a3ff
irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac1: <Intel Panther Point HDA Controller> mem 0xf5330000-0xf5333fff irq
22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib2: [GIANT-LOCKED]
pci2: <ACPI PCI bus> on pcib2
sdhci_pci0: <RICOH R5CE822 SD> mem 0xf4a01000-0xf4a010ff irq 16 at device
0.0 on pci2
sdhci_pci0: 1 slot(s) allocated
pci2: <serial bus, FireWire> at device 0.3 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
iwn0: <Intel Centrino Ultimate-N 6300> mem 0xf4900000-0xf4901fff irq 17 at
device 0.0 on pci3
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib4: [GIANT-LOCKED]
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf5339000-0xf53393ff
irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port
0x6068-0x606f,0x6074-0x6077,0x6060-0x6067,0x6070-0x6073,0x6020-0x603f mem
0xf5338000-0xf53387ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
nvme cam probe device init
hdacc0: <NVIDIA (0x0042) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0042) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm1: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 6 on hdaa0
pcm2: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 7 on hdaa0
hdacc1: <Realtek ALC269 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc1
pcm3: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,21 and 24 on hdaa1
pcm4: <Realtek ALC269 (Internal Analog Mic)> at nid 18 on hdaa1
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Samsung SSD 840 Series DXT08B0Q> ACS-2 ATA SATA 3.x device
ada0: Serial Number S14LNEAD801416V
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <Samsung SSD 840 EVO 1TB EXT0BB6Q> ACS-2 ATA SATA 3.x device
ada1: Serial Number S1D9NSAF405493W
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
ada1: quirks=0x3<4K,NCQ_TRIM_BROKEN>
ses0 at ahciem0 bus 0 scbus3 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #6 Launched!
Timecounter "TSC-low" frequency 1197307180 Hz quality 1000
Trying to mount root from zfs:zroot/ROOT/FreeBSD11RC1 []...
Root mount waiting for: usbus2 usbus1 usbus0
uhub0: 8 ports with 8 removable, self powered
ugen0.2: <Lenovo> at usbus0
uhub1: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
Root mount waiting for: usbus2 usbus1
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on
usbus1
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on
usbus2
uhub3: 6 ports with 6 removable, self powered
Root mount waiting for: usbus2 usbus1
uhub4: 8 ports with 8 removable, self powered
ugen1.3: <Auth> at usbus1
ugen2.3: <Logitech> at usbus2
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/24.00, addr 3> on
usbus2
kbd2 at ukbd0
ugen1.4: <Broadcom Corp> at usbus1
ugen1.5: <Chicony Electronics Co., Ltd.> at usbus1
GEOM_ELI: Device ada1p1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: hardware
wlan0: Ethernet address: 3c:a9:f4:5a:a1:28
lagg0: IPv6 addresses on em0 have been removed before adding it as a member to
prevent IPv6 address scope violation.
lagg0: link state changed to DOWN
lagg0: IPv6 addresses on wlan0 have been removed before adding it as a member to
prevent IPv6 address scope violation.
iwn0: iwn_read_firmware: ucode rev=0x09dd0401
iwn0: iwn_read_firmware: ucode rev=0x09dd0401
umodem0: <H5321 gw Mobile Broadband Modem> on usbus0
umodem0: data interface 2, has CM over data, has break
umodem1: <H5321 gw Mobile Broadband Data Modem> on usbus0
umodem1: data interface 4, has CM over data, has break
umodem2: <H5321 gw Mobile Broadband GPS Port> on usbus0
umodem2: data interface 10, has CM over data, has break
cdce0: <Ericsson H5321 gw> on usbus0
ue0: <USB Ethernet> on cdce0
ue0: Ethernet address: 02:15:e0:ec:01:00
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/24.00, addr 3> on usbus2
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/24.00, addr 3> on
usbus2
ubt0: <Broadcom Corp BCM20702A0, rev 2.00/1.12, addr 4> on usbus1
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
KLD vboxdrv.ko: depends on kernel - not available or version mismatch
linker_load_file: Unsupported file type
wlan0: link state changed to UP
lagg0: link state changed to UP
wlan0: link state changed to DOWN
lagg0: link state changed to DOWN
wlan0: link state changed to UP
lagg0: link state changed to UP
wlan0: link state changed to DOWN
lagg0: link state changed to DOWN
KLD linux_adobe.ko: depends on kernel - not available or version mismatch
linker_load_file: Unsupported file type
wlan0: link state changed to UP
lagg0: link state changed to UP
wlan0: link state changed to DOWN
lagg0: link state changed to DOWN
wlan0: link state changed to UP
lagg0: link state changed to UP
wlan0: link state changed to DOWN
lagg0: link state changed to DOWN
wlan0: link state changed to UP
lagg0: link state changed to UP
wlan0: link state changed to DOWN
lagg0: link state changed to DOWN
wlan0: link state changed to UP
lagg0: link state changed to UP
wlan0: link state changed to DOWN
lagg0: link state changed to DOWN
interface iwn.1 already present in the KLD 'kernel'!
linker_load_file: Unsupported file type
wlan0: link state changed to UP
lagg0: link state changed to UP
wlan0: link state changed to DOWN
lagg0: link state changed to DOWN