samba - Dec 2016 - 答复: Is the "\\x.x.x.x" type tree connect request a client related feature?

Hi folks

   I face a problem when using the samba share, Here is the detail:

1) Phenomenon

   In windows 7, sometimes, I type the samba server ip address and can see the
shared folder. (the samba version is 4.3.11)

a、However when I try to open the shared folder, it fails with a windows error
message like “please check the spelling of the name, or some problem may related
to the network”, and returns the error code 0x80070035(cannot find the network
path).

The shared folder may be opened successfully in a while. Or it will always fail
in a long period with the error returned above(not sure if it will automatically
recover finally)

b、The problem in a may be client-related and occasionally appeared. At some
other windows 7 environments, it may never happen(at least I have tried dozens
of times, but it turns out normal each time)



2) Analysis

a、 Something abnormal can be found in the samba log as below:

[2016/12/26 22:15:35.238956,  0, pid=605906, effective(0, 0), real(0, 0)]
../source3/param/loadparm.c:3240(process_usershare_file)

  process_usershare_file: share name //172.16.37.96 contains invalid characters
(any of %<>*?|/\+=;:",)

[2016/12/26 22:15:35.238973,  3, pid=605906, effective(0, 0), real(0, 0)]
../source3/param/service.c:249(find_service)

  find_service() failed to find service //172.16.37.96

[2016/12/26 22:15:35.238985,  3, pid=605906, effective(0, 0), real(0, 0)]
../source3/smbd/smb2_tcon.c:266(smbd_smb2_tree_connect)

  smbd_smb2_tree_connect: couldn't find service //172.16.37.96

[2016/12/26 22:15:35.239004, 50, pid=605906, effective(0, 0), real(0, 0),
class=tevent] ../lib/util/tevent_debug.c:66(samba_tevent_debug)

  s3_tevent: Schedule immediate event "tevent_req_trigger":
0x56007af6bd80

[2016/12/26 22:15:35.239021, 50, pid=605906, effective(0, 0), real(0, 0),
class=tevent] ../lib/util/tevent_debug.c:66(samba_tevent_debug)

  s3_tevent: Cancel immediate event 0x56007af6bd80
"tevent_req_trigger"

[2016/12/26 22:15:35.239035, 10, pid=605906, effective(0, 0), real(0, 0)]
../source3/smbd/smb2_server.c:2789(smbd_smb2_request_error_ex)

  smbd_smb2_request_error_ex: idx[1] status[NT_STATUS_BAD_NETWORK_NAME] || at
../source3/smbd/smb2_tcon.c:135

[2016/12/26 22:15:35.239053, 10, pid=605906, effective(0, 0), real(0, 0)]
../source3/smbd/smb2_server.c:2680(smbd_smb2_request_done_ex)

  smbd_smb2_request_done_ex: idx[1] status[NT_STATUS_BAD_NETWORK_NAME] body[8]
dyn[yes:1] at ../source3/smbd/smb2_server.c:2837



b、Something abnormal may also be observed in the wireshark:

the tree connect requests of the normal case may follow like this order:

Tree connect request Tree \\172.16.37.96\IPC$

Tree connect request Tree \\172.16.37.96\sharedfolder1

Tree connect request Tree \\172.16.37.96\sharedfolder2

…

…



the tree connect requests of the abnormal case may follow like this order:

Tree connect request Tree \\172.16.37.96\IPC$

Tree connect request Tree \\172.16.37.96

Tree connect request Tree \\172.16.37.96

…

…



3) Confused

I am confused about the abnormal facts above and have some questions:

When and Why does the windows 7 sometimes send a pure ip address tree connect
request (like \\x.x.x.x) to the samba server after the IPC$ request?

Is it fine for the samba 4.3.11 to accept the pure ip address tree connect
request?

Is this really a client-related phenomenon?

Are there any solutions about this problem?





Thanks

Best regards!









-------------------------------------------------------------------------------------------------------------------------------------
本邮件及其附件含有杭州华三通信技术有限公司的保密信息，仅限于发送给上面地址中列出
的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、
或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本
邮件！
This e-mail and its attachments contain confidential information from H3C, which
is
intended only for the person or entity whose address is listed above. Any use of
the
information contained herein in any way (including, but not limited to, total or
partial
disclosure, reproduction, or dissemination) by persons other than the intended
recipient(s) is prohibited. If you receive this e-mail in error, please notify
the sender
by phone or email immediately and delete it!

Is the samba server a domain controller?  Is this a classic domain or an 
Active Directory domain.

If you are using a classic domain you probably want a WINS server 
configured.      I find it works better if the primary domain controller 
is also the WINS server.         In a classic domain, keep the "smb 
ports"  as the default ( "smb ports = 445 139.")      What is the
"max
protocol" version set ?   I had trouble with SMB2   so I set  "max 
protocol = NT1."

Do you have  forward and reverse DNS entries for all servers  ("A"
host
and "PTR" records.)

I also found that connections to "myservername.mydomain.com\myshare" 
would be treated differently on windows 7 clients that connections to 
"myservername\myshare" in a classic domain.     If the Samba domain
name
is "MYDOMAIN" then connections to
"myservername.mydomain.com" would
result in a conflict of the samba domain name with the DNS domain name. 
This caused problems with Microsoft Excel and Powerpoint not trusting 
documents from an "insecure" source.





On 12/27/16 05:44, Chenyehua via samba wrote:
> Hi folks
>
>     I face a problem when using the samba share, Here is the detail:
>
> 1) Phenomenon
>
>     In windows 7, sometimes, I type the samba server ip address and can see
the shared folder. (the samba version is 4.3.11)
>
> a、However when I try to open the shared folder, it fails with a windows
error message like “please check the spelling of the name, or some problem may
related to the network”, and returns the error code 0x80070035(cannot find the
network path).
>
> The shared folder may be opened successfully in a while. Or it will always
fail in a long period with the error returned above(not sure if it will
automatically recover finally)
>
> b、The problem in a may be client-related and occasionally appeared. At some
other windows 7 environments, it may never happen(at least I have tried dozens
of times, but it turns out normal each time)
>
>
>
> 2) Analysis
>
> a、 Something abnormal can be found in the samba log as below:
>
> [2016/12/26 22:15:35.238956,  0, pid=605906, effective(0, 0), real(0, 0)]
../source3/param/loadparm.c:3240(process_usershare_file)
>
>    process_usershare_file: share name //172.16.37.96 contains invalid
characters (any of %<>*?|/\+=;:",)
>
> [2016/12/26 22:15:35.238973,  3, pid=605906, effective(0, 0), real(0, 0)]
../source3/param/service.c:249(find_service)
>
>    find_service() failed to find service //172.16.37.96
>
> [2016/12/26 22:15:35.238985,  3, pid=605906, effective(0, 0), real(0, 0)]
../source3/smbd/smb2_tcon.c:266(smbd_smb2_tree_connect)
>
>    smbd_smb2_tree_connect: couldn't find service //172.16.37.96
>
> [2016/12/26 22:15:35.239004, 50, pid=605906, effective(0, 0), real(0, 0),
class=tevent] ../lib/util/tevent_debug.c:66(samba_tevent_debug)
>
>    s3_tevent: Schedule immediate event "tevent_req_trigger":
0x56007af6bd80
>
> [2016/12/26 22:15:35.239021, 50, pid=605906, effective(0, 0), real(0, 0),
class=tevent] ../lib/util/tevent_debug.c:66(samba_tevent_debug)
>
>    s3_tevent: Cancel immediate event 0x56007af6bd80
"tevent_req_trigger"
>
> [2016/12/26 22:15:35.239035, 10, pid=605906, effective(0, 0), real(0, 0)]
../source3/smbd/smb2_server.c:2789(smbd_smb2_request_error_ex)
>
>    smbd_smb2_request_error_ex: idx[1] status[NT_STATUS_BAD_NETWORK_NAME] ||
at ../source3/smbd/smb2_tcon.c:135
>
> [2016/12/26 22:15:35.239053, 10, pid=605906, effective(0, 0), real(0, 0)]
../source3/smbd/smb2_server.c:2680(smbd_smb2_request_done_ex)
>
>    smbd_smb2_request_done_ex: idx[1] status[NT_STATUS_BAD_NETWORK_NAME]
body[8] dyn[yes:1] at ../source3/smbd/smb2_server.c:2837
>
>
>
> b、Something abnormal may also be observed in the wireshark:
>
> the tree connect requests of the normal case may follow like this order:
>
> Tree connect request Tree \\172.16.37.96\IPC$
>
> Tree connect request Tree \\172.16.37.96\sharedfolder1
>
> Tree connect request Tree \\172.16.37.96\sharedfolder2
>
> …
>
> …
>
>
>
> the tree connect requests of the abnormal case may follow like this order:
>
> Tree connect request Tree \\172.16.37.96\IPC$
>
> Tree connect request Tree \\172.16.37.96
>
> Tree connect request Tree \\172.16.37.96
>
> …
>
> …
>
>
>
> 3) Confused
>
> I am confused about the abnormal facts above and have some questions:
>
> When and Why does the windows 7 sometimes send a pure ip address tree
connect request (like \\x.x.x.x) to the samba server after the IPC$ request?
>
> Is it fine for the samba 4.3.11 to accept the pure ip address tree connect
request?
>
> Is this really a client-related phenomenon?
>
> Are there any solutions about this problem?
>
>
>
>
>
> Thanks
>
> Best regards!
>
>
>
>
>
>
>
>
>
>
-------------------------------------------------------------------------------------------------------------------------------------
> 本邮件及其附件含有杭州华三通信技术有限公司的保密信息，仅限于发送给上面地址中列出
> 的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、
> 或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本
> 邮件！
> This e-mail and its attachments contain confidential information from H3C,
which is
> intended only for the person or entity whose address is listed above. Any
use of the
> information contained herein in any way (including, but not limited to,
total or partial
> disclosure, reproduction, or dissemination) by persons other than the
intended
> recipient(s) is prohibited. If you receive this e-mail in error, please
notify the sender
> by phone or email immediately and delete it!

Thanks for your attention, Gaiseric.
Sorry , but I had a little confused. Did you mean that the problem was something
relevant with the DNS? However in my impression, I might not do anything about
the DNS.

I have some clues that might be helped:
1) First of all, my samba server version set is "max protocol = SMB2",
and the final protocol according to the negotiation result is smb2.10. The
problem is more likely to appear when the authentication changes(like
user->ldap) or the password changes.
2)The direct fact that leading to the failure may be the bad tree connect
request with the format of "\\x.x.x.x", which should be
"\\x.x.x.x\xx" required by SMB2 protocol
3)So my key questions are:
  a、When and why does the windows 7 sometimes sends the tree connect request
(like \\x.x.x.x, which is not accepted by SMB2 protocol) to the samba server?
  b、Is this a win7 bug or a problem with the relevant options set? Or anything
else?
  c、How to solve this problem？

-----邮件原件-----
发件人: samba [mailto:samba-bounces at lists.samba.org] 代表 Gaiseric Vandal via
samba
发送时间: 2016年12月27日 23:32
收件人: samba at lists.samba.org
主题: Re: [Samba] Is the "\\x.x.x.x" type tree connect request a client
related feature?

Is the samba server a domain controller?  Is this a classic domain or an Active
Directory domain.

If you are using a classic domain you probably want a WINS server 
configured.      I find it works better if the primary domain controller 
is also the WINS server.         In a classic domain, keep the "smb 
ports"  as the default ( "smb ports = 445 139.")      What is the
"max
protocol" version set ?   I had trouble with SMB2   so I set  "max 
protocol = NT1."

Do you have  forward and reverse DNS entries for all servers  ("A"
host and "PTR" records.)

I also found that connections to "myservername.mydomain.com\myshare" 
would be treated differently on windows 7 clients that connections to 
"myservername\myshare" in a classic domain.     If the Samba domain
name
is "MYDOMAIN" then connections to
"myservername.mydomain.com" would result in a conflict of the samba
domain name with the DNS domain name.
This caused problems with Microsoft Excel and Powerpoint not trusting documents
from an "insecure" source.





On 12/27/16 05:44, Chenyehua via samba wrote:
> Hi folks
>
>     I face a problem when using the samba share, Here is the detail:
>
> 1) Phenomenon
>
>     In windows 7, sometimes, I type the samba server ip address and 
> can see the shared folder. (the samba version is 4.3.11)
>
> a、However when I try to open the shared folder, it fails with a windows
error message like “please check the spelling of the name, or some problem may
related to the network”, and returns the error code 0x80070035(cannot find the
network path).
>
> The shared folder may be opened successfully in a while. Or it will 
> always fail in a long period with the error returned above(not sure if 
> it will automatically recover finally)
>
> b、The problem in a may be client-related and occasionally appeared. At 
> some other windows 7 environments, it may never happen(at least I have 
> tried dozens of times, but it turns out normal each time)
>
>
>
> 2) Analysis
>
> a、 Something abnormal can be found in the samba log as below:
>
> [2016/12/26 22:15:35.238956,  0, pid=605906, effective(0, 0), real(0, 
> 0)] ../source3/param/loadparm.c:3240(process_usershare_file)
>
>    process_usershare_file: share name //172.16.37.96 contains invalid 
> characters (any of %<>*?|/\+=;:",)
>
> [2016/12/26 22:15:35.238973,  3, pid=605906, effective(0, 0), real(0, 
> 0)] ../source3/param/service.c:249(find_service)
>
>    find_service() failed to find service //172.16.37.96
>
> [2016/12/26 22:15:35.238985,  3, pid=605906, effective(0, 0), real(0, 
> 0)] ../source3/smbd/smb2_tcon.c:266(smbd_smb2_tree_connect)
>
>    smbd_smb2_tree_connect: couldn't find service //172.16.37.96
>
> [2016/12/26 22:15:35.239004, 50, pid=605906, effective(0, 0), real(0, 
> 0), class=tevent] ../lib/util/tevent_debug.c:66(samba_tevent_debug)
>
>    s3_tevent: Schedule immediate event "tevent_req_trigger": 
> 0x56007af6bd80
>
> [2016/12/26 22:15:35.239021, 50, pid=605906, effective(0, 0), real(0, 
> 0), class=tevent] ../lib/util/tevent_debug.c:66(samba_tevent_debug)
>
>    s3_tevent: Cancel immediate event 0x56007af6bd80
"tevent_req_trigger"
>
> [2016/12/26 22:15:35.239035, 10, pid=605906, effective(0, 0), real(0, 
> 0)] ../source3/smbd/smb2_server.c:2789(smbd_smb2_request_error_ex)
>
>    smbd_smb2_request_error_ex: idx[1] 
> status[NT_STATUS_BAD_NETWORK_NAME] || at 
> ../source3/smbd/smb2_tcon.c:135
>
> [2016/12/26 22:15:35.239053, 10, pid=605906, effective(0, 0), real(0, 
> 0)] ../source3/smbd/smb2_server.c:2680(smbd_smb2_request_done_ex)
>
>    smbd_smb2_request_done_ex: idx[1] 
> status[NT_STATUS_BAD_NETWORK_NAME] body[8] dyn[yes:1] at 
> ../source3/smbd/smb2_server.c:2837
>
>
>
> b、Something abnormal may also be observed in the wireshark:
>
> the tree connect requests of the normal case may follow like this order:
>
> Tree connect request Tree \\172.16.37.96\IPC$
>
> Tree connect request Tree \\172.16.37.96\sharedfolder1
>
> Tree connect request Tree \\172.16.37.96\sharedfolder2
>
> …
>
> …
>
>
>
> the tree connect requests of the abnormal case may follow like this order:
>
> Tree connect request Tree \\172.16.37.96\IPC$
>
> Tree connect request Tree \\172.16.37.96
>
> Tree connect request Tree \\172.16.37.96
>
> …
>
> …
>
>
>
> 3) Confused
>
> I am confused about the abnormal facts above and have some questions:
>
> When and Why does the windows 7 sometimes send a pure ip address tree
connect request (like \\x.x.x.x) to the samba server after the IPC$ request?
>
> Is it fine for the samba 4.3.11 to accept the pure ip address tree connect
request?
>
> Is this really a client-related phenomenon?
>
> Are there any solutions about this problem?
>
>
>
>
>
> Thanks
>
> Best regards!
>
>
>
>
>
>
>
>
>
> ----------------------------------------------------------------------
> ---------------------------------------------------------------
> 本邮件及其附件含有杭州华三通信技术有限公司的保密信息，仅限于发送给上面地址中列出
> 的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、
> 或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本
> 邮件！
> This e-mail and its attachments contain confidential information from 
> H3C, which is intended only for the person or entity whose address is 
> listed above. Any use of the information contained herein in any way 
> (including, but not limited to, total or partial disclosure, 
> reproduction, or dissemination) by persons other than the intended
> recipient(s) is prohibited. If you receive this e-mail in error, 
> please notify the sender by phone or email immediately and delete it!


--
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba