Hi Tom, Am 12.04.2016 um 22:26 schrieb Tom Hendrikx:> On 12-04-16 20:14, Johannes Rohr wrote: >> Hi, my setup is a dovecot 2.0.19 IMAP server on Ubuntu Precise with >> the antispam plugin in version 2.0+20120225-2 and spamassassin at >> version 3.2.2 >> >> I have been trying and failed to get the pipe backend of the antispam >> plugin to work. Spamassin by itself works, a manual call of sa-learn >> works fine. Bayes data is stored in a mysql DB. >> >> I have the following configuration in /etc/dovecot/conf.d/90-plugin.conf >> >> plugin { >> #setting_name = value >> sieve=~/.dovecot.sieve >> sieve_dir=~/sieve >> antispam_pipe_program_spam_arg = --spam >> antispam_pipe_program_notspam_arg = --ham >> antispam_pipe_program = /usr/local/bin/sa-learn-pipe.sh >> antispam_pipe_program_args = --username=%u # % expansion done by >> dovecot > You need to specify the argument list as a list seperated by semicolons, > per example on the wiki: > > antispam_pipe_program_args = --username;%uNot sure about that, because sa-learn expects the parameter --username=user at na.me, this is one parameter, not two, and it works for me locally, where I also set up dovecot to test. The main differences are that the versions I have here are newer, I'm running Debian sid, the server is on Ubuntu Precise, and second, the server is handling virtual users, locally I have only real Unix users. Also, dovecot doesn't complain about configuration errors regard --username=%u. What other way would be there to get the parameter passed to sa-learn the way I want? btw, I tried this, just to be sure, but the result was the same.> > The verbose debug should give you some logging to work with.Yes, and I pasted the output. I can of course repeat: Apr 12 22:53:02 vm10 imap: antispam: mailbox_is_unsure(Junk): 0 Apr 12 22:53:02 vm10 imap: antispam: mailbox_is_trash(INBOX): 0 Apr 12 22:53:02 vm10 imap: antispam: mailbox_is_trash(Junk): 0 Apr 12 22:53:02 vm10 imap: antispam: mail copy: from trash: 0, to trash: 0 Apr 12 22:53:02 vm10 imap: antispam: mailbox_is_spam(INBOX): 0 Apr 12 22:53:02 vm10 imap: antispam: mailbox_is_spam(Junk): 1 Apr 12 22:53:02 vm10 imap: antispam: mailbox_is_unsure(INBOX): 0 Apr 12 22:53:02 vm10 imap: antispam: mail copy: src spam: 0, dst spam: 1, src unsure: 0 Apr 12 22:53:02 vm10 imap: antispam: running mailtrain backend program /usr/bin/sa-learn Apr 12 22:53:02 vm10 imap: antispam: running mailtrain backend program /usr/bin/sa-learn Apr 12 22:53:02 vm10 imap: antispam: running mailtrain backend program parameter 1 --username=johannes at rohr.org Apr 12 22:53:02 vm10 imap: antispam: running mailtrain backend program parameter 2 --spam Apr 12 22:53:03 vm10 imap: antispam: run program failed with exit code -1> Also, what > does the wrapper script log when dovecot runs it?I have actually ditched the wrapper script because it works without locally, I have configured the plugin to call sa-learn directly.> How does that differ > from a manual run?sa-learn works just fine with a manual run. It seems as if the plugin is passing the parameters wrongly, but the debugging output doesn't reveal the actual command, so it's just guesswork. Cheers, Johannes> > >> antispam_trash = trash;Trash;Deleted Items;Deleted Messages >> antispam_spam = SPAM;Junk >> antispam_backend = pipe >> antispam_verbose_debug = 1 >> antispam_debug_target = syslog >> antispam_pipe_tmpdir = /tmp >> } >> >> I have tried the following wrapper script: >> #!/bin/bash >> # set -x >> LOGFILE=/tmp/sa-learn-pipe.log >> echo "$$-start ($*)" >> $LOGFILE >> #echo $* > /tmp/sendmail-parms.txt >> cat<&0 >> /tmp/sendmail-msg-$$.txt >> /usr/bin/sa-learn $* -D /tmp/sendmail-msg-$$.txt >> $LOGFILE 2>&1 && \ >> rm -f /tmp/sendmail-msg-$$.txt >> echo "$$-end" >> $LOGFILE >> exit 0 >> >> It somehow isn't working. I can call the wrapper script manually e.g. >> sudo -u vmail /usr/local/bin/sa-learn-pipe.sh --username=some at mail.user >> --ham \ >> < someham >> >> But it doesn't work from dovecot. It seems the script is called. but no >> new patterns show up in the bayes DB. Unfortunately, the plugin seems to >> be documented poorly. How does it call the programme it pipes to? Is it >> something like $programme --par1 --par2 < message ? Why can't / >> shouldn't I call sa-learn directly? All the instructions I found on the >> in internet contained a wrapper script, but none bothered to explain why >> you would actually need it. >> >> I would be very grateful, if someone could enlighten me on that... >> >> Cheers, >> >> Johannes >
Hi List, does the antispam plugin any way of actually seeing how it is calling the pipe program and how it is failing? I can't reproduce the failure when I call sa-learn manually. Can someone tell me, with which UID the call happens, is it the UID the current dovecot process is running under (which would be vmail, as it is a virtual user setup) Cheers, Johannes Am 12.04.2016 um 23:09 schrieb Johannes Rohr:> Hi Tom, > > Am 12.04.2016 um 22:26 schrieb Tom Hendrikx: >> On 12-04-16 20:14, Johannes Rohr wrote: >>> Hi, my setup is a dovecot 2.0.19 IMAP server on Ubuntu Precise >>> with >>> the antispam plugin in version 2.0+20120225-2 and spamassassin at >>> version 3.2.2 >>> >>> I have been trying and failed to get the pipe backend of the antispam >>> plugin to work. Spamassin by itself works, a manual call of sa-learn >>> works fine. Bayes data is stored in a mysql DB. >>> >>> I have the following configuration in >>> /etc/dovecot/conf.d/90-plugin.conf >>> >>> plugin { >>> #setting_name = value >>> sieve=~/.dovecot.sieve >>> sieve_dir=~/sieve >>> antispam_pipe_program_spam_arg = --spam >>> antispam_pipe_program_notspam_arg = --ham >>> antispam_pipe_program = /usr/local/bin/sa-learn-pipe.sh >>> antispam_pipe_program_args = --username=%u # % expansion done by >>> dovecot >> You need to specify the argument list as a list seperated by semicolons, >> per example on the wiki: >> >> antispam_pipe_program_args = --username;%u > > Not sure about that, because sa-learn expects the parameter > --username=user at na.me, this is one parameter, not two, and it works > for me locally, where I also set up dovecot to test. The main > differences are that the versions I have here are newer, I'm running > Debian sid, the server is on Ubuntu Precise, and second, the server is > handling virtual users, locally I have only real Unix users. > > Also, dovecot doesn't complain about configuration errors regard > --username=%u. What other way would be there to get the parameter > passed to sa-learn the way I want? > > btw, I tried this, just to be sure, but the result was the same. > >> >> The verbose debug should give you some logging to work with. > Yes, and I pasted the output. I can of course repeat: > > Apr 12 22:53:02 vm10 imap: antispam: mailbox_is_unsure(Junk): 0 > Apr 12 22:53:02 vm10 imap: antispam: mailbox_is_trash(INBOX): 0 > Apr 12 22:53:02 vm10 imap: antispam: mailbox_is_trash(Junk): 0 > Apr 12 22:53:02 vm10 imap: antispam: mail copy: from trash: 0, to > trash: 0 > Apr 12 22:53:02 vm10 imap: antispam: mailbox_is_spam(INBOX): 0 > Apr 12 22:53:02 vm10 imap: antispam: mailbox_is_spam(Junk): 1 > Apr 12 22:53:02 vm10 imap: antispam: mailbox_is_unsure(INBOX): 0 > Apr 12 22:53:02 vm10 imap: antispam: mail copy: src spam: 0, dst spam: > 1, src unsure: 0 > Apr 12 22:53:02 vm10 imap: antispam: running mailtrain backend program > /usr/bin/sa-learn > Apr 12 22:53:02 vm10 imap: antispam: running mailtrain backend program > /usr/bin/sa-learn > Apr 12 22:53:02 vm10 imap: antispam: running mailtrain backend program > parameter 1 --username=johannes at rohr.org > Apr 12 22:53:02 vm10 imap: antispam: running mailtrain backend program > parameter 2 --spam > Apr 12 22:53:03 vm10 imap: antispam: run program failed with exit code -1 > > > > >> Also, what >> does the wrapper script log when dovecot runs it? > > I have actually ditched the wrapper script because it works without > locally, I have configured the plugin to call sa-learn directly. > >> How does that differ >> from a manual run? > sa-learn works just fine with a manual run. It seems as if the plugin > is passing the parameters wrongly, but the debugging output doesn't > reveal the actual command, so it's just guesswork. > > Cheers, > > Johannes > >> >> >>> antispam_trash = trash;Trash;Deleted Items;Deleted Messages >>> antispam_spam = SPAM;Junk >>> antispam_backend = pipe >>> antispam_verbose_debug = 1 >>> antispam_debug_target = syslog >>> antispam_pipe_tmpdir = /tmp >>> } >>> >>> I have tried the following wrapper script: >>> #!/bin/bash >>> # set -x >>> LOGFILE=/tmp/sa-learn-pipe.log >>> echo "$$-start ($*)" >> $LOGFILE >>> #echo $* > /tmp/sendmail-parms.txt >>> cat<&0 >> /tmp/sendmail-msg-$$.txt >>> /usr/bin/sa-learn $* -D /tmp/sendmail-msg-$$.txt >> $LOGFILE 2>&1 && \ >>> rm -f /tmp/sendmail-msg-$$.txt >>> echo "$$-end" >> $LOGFILE >>> exit 0 >>> >>> It somehow isn't working. I can call the wrapper script manually e.g. >>> sudo -u vmail /usr/local/bin/sa-learn-pipe.sh --username=some at mail.user >>> --ham \ >>> < someham >>> >>> But it doesn't work from dovecot. It seems the script is called. but no >>> new patterns show up in the bayes DB. Unfortunately, the plugin >>> seems to >>> be documented poorly. How does it call the programme it pipes to? Is it >>> something like $programme --par1 --par2 < message ? Why can't / >>> shouldn't I call sa-learn directly? All the instructions I found on the >>> in internet contained a wrapper script, but none bothered to explain >>> why >>> you would actually need it. >>> >>> I would be very grateful, if someone could enlighten me on that... >>> >>> Cheers, >>> >>> Johannes >>
On 13-04-16 08:27, Johannes Rohr wrote:> Hi List, > > does the antispam plugin any way of actually seeing how it is > calling the pipe program and how it is failing? I can't reproduce the > failure when I call sa-learn manually. Can someone tell me, with > which UID the call happens, is it the UID the current dovecot process > is running under (which would be vmail, as it is a virtual user > setup) Cheers, >Hi Johannes, This is exactly what the wrapper script is supposed to log for you, or which is trivially to add to its output. The wrapper script is not actually useful for production, but it is for debugging. That is why I asked for its logging, and any differences between manual run and a dovecot run. Regards, Tom> Johannes > > Am 12.04.2016 um 23:09 schrieb Johannes Rohr: >> Hi Tom, >> >> Am 12.04.2016 um 22:26 schrieb Tom Hendrikx: >>> On 12-04-16 20:14, Johannes Rohr wrote: >>>> Hi, my setup is a dovecot 2.0.19 IMAP server on Ubuntu Precise >>>> with the antispam plugin in version 2.0+20120225-2 and >>>> spamassassin at version 3.2.2 >>>> >>>> I have been trying and failed to get the pipe backend of the >>>> antispam plugin to work. Spamassin by itself works, a manual >>>> call of sa-learn works fine. Bayes data is stored in a mysql >>>> DB. >>>> >>>> I have the following configuration in >>>> /etc/dovecot/conf.d/90-plugin.conf >>>> >>>> plugin { #setting_name = value sieve=~/.dovecot.sieve >>>> sieve_dir=~/sieve antispam_pipe_program_spam_arg = --spam >>>> antispam_pipe_program_notspam_arg = --ham >>>> antispam_pipe_program = /usr/local/bin/sa-learn-pipe.sh >>>> antispam_pipe_program_args = --username=%u # % expansion done >>>> by dovecot >>> You need to specify the argument list as a list seperated by >>> semicolons, per example on the wiki: >>> >>> antispam_pipe_program_args = --username;%u >> >> Not sure about that, because sa-learn expects the parameter >> --username=user at na.me, this is one parameter, not two, and it >> works for me locally, where I also set up dovecot to test. The >> main differences are that the versions I have here are newer, I'm >> running Debian sid, the server is on Ubuntu Precise, and second, >> the server is handling virtual users, locally I have only real Unix >> users. >> >> Also, dovecot doesn't complain about configuration errors regard >> --username=%u. What other way would be there to get the parameter >> passed to sa-learn the way I want? >> >> btw, I tried this, just to be sure, but the result was the same. >> >>> >>> The verbose debug should give you some logging to work with. >> Yes, and I pasted the output. I can of course repeat: >> >> Apr 12 22:53:02 vm10 imap: antispam: mailbox_is_unsure(Junk): 0 Apr >> 12 22:53:02 vm10 imap: antispam: mailbox_is_trash(INBOX): 0 Apr 12 >> 22:53:02 vm10 imap: antispam: mailbox_is_trash(Junk): 0 Apr 12 >> 22:53:02 vm10 imap: antispam: mail copy: from trash: 0, to trash: >> 0 Apr 12 22:53:02 vm10 imap: antispam: mailbox_is_spam(INBOX): 0 >> Apr 12 22:53:02 vm10 imap: antispam: mailbox_is_spam(Junk): 1 Apr >> 12 22:53:02 vm10 imap: antispam: mailbox_is_unsure(INBOX): 0 Apr 12 >> 22:53:02 vm10 imap: antispam: mail copy: src spam: 0, dst spam: 1, >> src unsure: 0 Apr 12 22:53:02 vm10 imap: antispam: running >> mailtrain backend program /usr/bin/sa-learn Apr 12 22:53:02 vm10 >> imap: antispam: running mailtrain backend program >> /usr/bin/sa-learn Apr 12 22:53:02 vm10 imap: antispam: running >> mailtrain backend program parameter 1 --username=johannes at rohr.org >> Apr 12 22:53:02 vm10 imap: antispam: running mailtrain backend >> program parameter 2 --spam Apr 12 22:53:03 vm10 imap: antispam: run >> program failed with exit code -1 >> >> >> >> >>> Also, what does the wrapper script log when dovecot runs it? >> >> I have actually ditched the wrapper script because it works >> without locally, I have configured the plugin to call sa-learn >> directly. >> >>> How does that differ from a manual run? >> sa-learn works just fine with a manual run. It seems as if the >> plugin is passing the parameters wrongly, but the debugging output >> doesn't reveal the actual command, so it's just guesswork. >> >> Cheers, >> >> Johannes >> >>> >>> >>>> antispam_trash = trash;Trash;Deleted Items;Deleted Messages >>>> antispam_spam = SPAM;Junk antispam_backend = pipe >>>> antispam_verbose_debug = 1 antispam_debug_target = syslog >>>> antispam_pipe_tmpdir = /tmp } >>>> >>>> I have tried the following wrapper script: #!/bin/bash # set >>>> -x LOGFILE=/tmp/sa-learn-pipe.log echo "$$-start ($*)" >> >>>> $LOGFILE #echo $* > /tmp/sendmail-parms.txt cat<&0 >> >>>> /tmp/sendmail-msg-$$.txt /usr/bin/sa-learn $* -D >>>> /tmp/sendmail-msg-$$.txt >> $LOGFILE 2>&1 && \ rm -f >>>> /tmp/sendmail-msg-$$.txt echo "$$-end" >> $LOGFILE exit 0 >>>> >>>> It somehow isn't working. I can call the wrapper script >>>> manually e.g. sudo -u vmail /usr/local/bin/sa-learn-pipe.sh >>>> --username=some at mail.user --ham \ < someham >>>> >>>> But it doesn't work from dovecot. It seems the script is >>>> called. but no new patterns show up in the bayes DB. >>>> Unfortunately, the plugin seems to be documented poorly. How >>>> does it call the programme it pipes to? Is it something like >>>> $programme --par1 --par2 < message ? Why can't / shouldn't I >>>> call sa-learn directly? All the instructions I found on the in >>>> internet contained a wrapper script, but none bothered to >>>> explain why you would actually need it. >>>> >>>> I would be very grateful, if someone could enlighten me on >>>> that... >>>> >>>> Cheers, >>>> >>>> Johannes >>>
Seemingly Similar Threads
- antispam plugin, pipe backend, how to make it work?
- antispam plugin, pipe backend, how to make it work?
- antispam plugin, pipe backend, how to make it work?
- plugin antispam sa-learn run program failed with exit code -1
- Need a bit of help with the antispam plugin