Linux Virtualization - Oct 2019 - [PATCH net 0/2] vsock: don't allow half-closed socket in the host transports

We are implementing a test suite for the VSOCK sockets and we discovered
that vmci_transport never allowed half-closed socket on the host side.

As Jorgen explained [1] this is due to the implementation of VMCI.

Since we want to have the same behaviour across all transports, this
series adds a section in the "Implementation notes" to exaplain this
behaviour, and changes the vhost_transport to behave the same way.

[1] https://patchwork.ozlabs.org/cover/847998/#1831400

Stefano Garzarella (2):
  vsock: add half-closed socket details in the implementation notes
  vhost/vsock: don't allow half-closed socket in the host

 drivers/vhost/vsock.c    | 17 ++++++++++++++++-
 net/vmw_vsock/af_vsock.c |  4 ++++
 2 files changed, 20 insertions(+), 1 deletion(-)

-- 
2.21.0

vmci_transport never allowed half-closed socket on the host side.
Since we want to have the same behaviour across all transports, we
add a section in the "Implementation notes".

Cc: Jorgen Hansen <jhansen at vmware.com>
Cc: Adit Ranadive <aditr at vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare at redhat.com>
---
 net/vmw_vsock/af_vsock.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/vmw_vsock/af_vsock.c b/net/vmw_vsock/af_vsock.c
index 2ab43b2bba31..27df57c2024b 100644
--- a/net/vmw_vsock/af_vsock.c
+++ b/net/vmw_vsock/af_vsock.c
@@ -83,6 +83,10 @@
  *   TCP_ESTABLISHED - connected
  *   TCP_CLOSING - disconnecting
  *   TCP_LISTEN - listening
+ *
+ * - Half-closed socket is supported only on the guest side. recv() on the host
+ * side should return EOF when the guest closes a connection, also if some
+ * data is still in the receive queue.
  */
 
 #include <linux/types.h>
-- 
2.21.0

vmci_transport never allowed half-closed socket on the host side.
In order to provide the same behaviour, we changed the
vhost_transport_stream_has_data() to return 0 (no data available)
if the peer (guest) closed the connection.

Signed-off-by: Stefano Garzarella <sgarzare at redhat.com>
---
 drivers/vhost/vsock.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c
index 9f57736fe15e..754120aa4478 100644
--- a/drivers/vhost/vsock.c
+++ b/drivers/vhost/vsock.c
@@ -58,6 +58,21 @@ static u32 vhost_transport_get_local_cid(void)
 	return VHOST_VSOCK_DEFAULT_HOST_CID;
 }
 
+static s64 vhost_transport_stream_has_data(struct vsock_sock *vsk)
+{
+	/* vmci_transport doesn't allow half-closed socket on the host side.
+	 * recv() on the host side returns EOF when the guest closes a
+	 * connection, also if some data is still in the receive queue.
+	 *
+	 * In order to provide the same behaviour, we always return 0
+	 * (no data available) if the peer (guest) closed the connection.
+	 */
+	if (vsk->peer_shutdown == SHUTDOWN_MASK)
+		return 0;
+
+	return virtio_transport_stream_has_data(vsk);
+}
+
 /* Callers that dereference the return value must hold vhost_vsock_mutex or the
  * RCU read lock.
  */
@@ -804,7 +819,7 @@ static struct virtio_transport vhost_transport = {
 
 		.stream_enqueue           = virtio_transport_stream_enqueue,
 		.stream_dequeue           = virtio_transport_stream_dequeue,
-		.stream_has_data          = virtio_transport_stream_has_data,
+		.stream_has_data          = vhost_transport_stream_has_data,
 		.stream_has_space         = virtio_transport_stream_has_space,
 		.stream_rcvhiwat          = virtio_transport_stream_rcvhiwat,
 		.stream_is_active         = virtio_transport_stream_is_active,
-- 
2.21.0

On Fri, Oct 11, 2019 at 03:07:56PM +0200, Stefano Garzarella
wrote:
> We are implementing a test suite for the VSOCK sockets and we discovered
> that vmci_transport never allowed half-closed socket on the host side.
> 
> As Jorgen explained [1] this is due to the implementation of VMCI.
> 
> Since we want to have the same behaviour across all transports, this
> series adds a section in the "Implementation notes" to exaplain
this
> behaviour, and changes the vhost_transport to behave the same way.
> 
> [1] https://patchwork.ozlabs.org/cover/847998/#1831400
Half closed sockets are very useful, and lots of
applications use tricks to swap a vsock for a tcp socket,
which might as a result break.

If VMCI really cares it can implement an ioctl to
allow applications to detect that half closed sockets aren't supported.

It does not look like VMCI wants to bother (users do not read
kernel implementation notes) so it does not really care.
So why do we want to cripple other transports intentionally?


> Stefano Garzarella (2):
>   vsock: add half-closed socket details in the implementation notes
>   vhost/vsock: don't allow half-closed socket in the host
> 
>  drivers/vhost/vsock.c    | 17 ++++++++++++++++-
>  net/vmw_vsock/af_vsock.c |  4 ++++
>  2 files changed, 20 insertions(+), 1 deletion(-)
> 
> -- 
> 2.21.0

On Fri, Oct 11, 2019 at 03:07:57PM +0200, Stefano Garzarella
wrote:
> vmci_transport never allowed half-closed socket on the host side.
> Since we want to have the same behaviour across all transports, we
> add a section in the "Implementation notes".
> 
> Cc: Jorgen Hansen <jhansen at vmware.com>
> Cc: Adit Ranadive <aditr at vmware.com>
> Signed-off-by: Stefano Garzarella <sgarzare at redhat.com>
> ---
>  net/vmw_vsock/af_vsock.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/net/vmw_vsock/af_vsock.c b/net/vmw_vsock/af_vsock.c
> index 2ab43b2bba31..27df57c2024b 100644
> --- a/net/vmw_vsock/af_vsock.c
> +++ b/net/vmw_vsock/af_vsock.c
> @@ -83,6 +83,10 @@
>   *   TCP_ESTABLISHED - connected
>   *   TCP_CLOSING - disconnecting
>   *   TCP_LISTEN - listening
> + *
> + * - Half-closed socket is supported only on the guest side. recv() on the
host
> + * side should return EOF when the guest closes a connection, also if some
> + * data is still in the receive queue.
>   */
>  
>  #include <linux/types.h>
That's a great way to lose data in a way that's hard to debug.

VMCI sockets connect to a hypervisor so there's tight control
of what the hypervisor can do.

But vhost vsocks connect to a fully fledged Linux, so
you can't assume this is safe. And application authors do not read
kernel source.
> -- 
> 2.21.0

On Fri, Oct 11, 2019 at 03:07:58PM +0200, Stefano Garzarella
wrote:
> vmci_transport never allowed half-closed socket on the host side.
> In order to provide the same behaviour, we changed the
> vhost_transport_stream_has_data() to return 0 (no data available)
> if the peer (guest) closed the connection.
> 
> Signed-off-by: Stefano Garzarella <sgarzare at redhat.com>
I don't think we should copy bugs like this.
Applications don't actually depend on this VMCI limitation, in fact
it looks like a working application can get broken by this.

So this looks like a userspace visible ABI change
which we can't really do.

If it turns out some application cares, it can always
fully close the connection. Or add an ioctl so the application
can find out whether half close works.
> ---
>  drivers/vhost/vsock.c | 17 ++++++++++++++++-
>  1 file changed, 16 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c
> index 9f57736fe15e..754120aa4478 100644
> --- a/drivers/vhost/vsock.c
> +++ b/drivers/vhost/vsock.c
> @@ -58,6 +58,21 @@ static u32 vhost_transport_get_local_cid(void)
>  	return VHOST_VSOCK_DEFAULT_HOST_CID;
>  }
>  
> +static s64 vhost_transport_stream_has_data(struct vsock_sock *vsk)
> +{
> +	/* vmci_transport doesn't allow half-closed socket on the host side.
> +	 * recv() on the host side returns EOF when the guest closes a
> +	 * connection, also if some data is still in the receive queue.
> +	 *
> +	 * In order to provide the same behaviour, we always return 0
> +	 * (no data available) if the peer (guest) closed the connection.
> +	 */
> +	if (vsk->peer_shutdown == SHUTDOWN_MASK)
> +		return 0;
> +
> +	return virtio_transport_stream_has_data(vsk);
> +}
> +
>  /* Callers that dereference the return value must hold vhost_vsock_mutex
or the
>   * RCU read lock.
>   */
> @@ -804,7 +819,7 @@ static struct virtio_transport vhost_transport = {
>  
>  		.stream_enqueue           = virtio_transport_stream_enqueue,
>  		.stream_dequeue           = virtio_transport_stream_dequeue,
> -		.stream_has_data          = virtio_transport_stream_has_data,
> +		.stream_has_data          = vhost_transport_stream_has_data,
>  		.stream_has_space         = virtio_transport_stream_has_space,
>  		.stream_rcvhiwat          = virtio_transport_stream_rcvhiwat,
>  		.stream_is_active         = virtio_transport_stream_is_active,
> -- 
> 2.21.0

On Fri, Oct 11, 2019 at 10:19:13AM -0400, Michael S. Tsirkin
wrote:
> On Fri, Oct 11, 2019 at 03:07:56PM +0200, Stefano Garzarella wrote:
> > We are implementing a test suite for the VSOCK sockets and we
discovered
> > that vmci_transport never allowed half-closed socket on the host side.
> > 
> > As Jorgen explained [1] this is due to the implementation of VMCI.
> > 
> > Since we want to have the same behaviour across all transports, this
> > series adds a section in the "Implementation notes" to
exaplain this
> > behaviour, and changes the vhost_transport to behave the same way.
> > 
> > [1] https://patchwork.ozlabs.org/cover/847998/#1831400
> 
> Half closed sockets are very useful, and lots of
> applications use tricks to swap a vsock for a tcp socket,
> which might as a result break.
Got it!
> 
> If VMCI really cares it can implement an ioctl to
> allow applications to detect that half closed sockets aren't supported.
> 
> It does not look like VMCI wants to bother (users do not read
> kernel implementation notes) so it does not really care.
> So why do we want to cripple other transports intentionally?
The main reason is that we are developing the test suite and we noticed
the miss match. Since we want to make sure that applications behave in
the same way on different transports, we thought we would solve it that
way.

But what you are saying (also in the reply of the patches) is actually
quite right. Not being publicized, applications do not expect this behavior,
so please discard this series.

My problem during the tests, was trying to figure out if half-closed
sockets were supported or not, so as you say adding an IOCTL or maybe
better a getsockopt() could solve the problem.

What do you think?

Thanks,
Stefano