thr3ads.net - Linux Virtualization - [PATCH] vhost: introduce mdev based hardware backend [Sep 2019]

If this information is useful, please help other people find it:
Share via:

Tiwei Bie

2019-Sep-26 04:54 UTC

[PATCH] vhost: introduce mdev based hardware backend

This patch introduces a mdev based hardware vhost backend.
This backend is built on top of the same abstraction used
in virtio-mdev and provides a generic vhost interface for
userspace to accelerate the virtio devices in guest.

This backend is implemented as a mdev device driver on top
of the same mdev device ops used in virtio-mdev but using
a different mdev class id, and it will register the device
as a VFIO device for userspace to use. Userspace can setup
the IOMMU with the existing VFIO container/group APIs and
then get the device fd with the device name. After getting
the device fd of this device, userspace can use vhost ioctls
to setup the backend.

Signed-off-by: Tiwei Bie <tiwei.bie at intel.com>
---
This patch depends on below series:
https://lkml.org/lkml/2019/9/24/357

RFC v4 -> v1:
- Implement vhost-mdev as a mdev device driver directly and
  connect it to VFIO container/group. (Jason);
- Pass ring addresses as GPAs/IOVAs in vhost-mdev to avoid
  meaningless HVA->GPA translations (Jason);

RFC v3 -> RFC v4:
- Build vhost-mdev on top of the same abstraction used by
  virtio-mdev (Jason);
- Introduce vhost fd and pass VFIO fd via SET_BACKEND ioctl (MST);

RFC v2 -> RFC v3:
- Reuse vhost's ioctls instead of inventing a VFIO regions/irqs
  based vhost protocol on top of vfio-mdev (Jason);

RFC v1 -> RFC v2:
- Introduce a new VFIO device type to build a vhost protocol
  on top of vfio-mdev;

 drivers/vhost/Kconfig      |   9 +
 drivers/vhost/Makefile     |   3 +
 drivers/vhost/mdev.c       | 381 +++++++++++++++++++++++++++++++++++++
 include/uapi/linux/vhost.h |   8 +
 4 files changed, 401 insertions(+)
 create mode 100644 drivers/vhost/mdev.c

diff --git a/drivers/vhost/Kconfig b/drivers/vhost/Kconfig
index 3d03ccbd1adc..decf0be8efe9 100644
--- a/drivers/vhost/Kconfig
+++ b/drivers/vhost/Kconfig
@@ -34,6 +34,15 @@ config VHOST_VSOCK
 	To compile this driver as a module, choose M here: the module will be called
 	vhost_vsock.
 
+config VHOST_MDEV
+	tristate "Vhost driver for Mediated devices"
+	depends on EVENTFD && VFIO && VFIO_MDEV
+	select VHOST
+	default n
+	---help---
+	Say M here to enable the vhost_mdev module for use with
+	the mediated device based hardware vhost accelerators
+
 config VHOST
 	tristate
 	---help---
diff --git a/drivers/vhost/Makefile b/drivers/vhost/Makefile
index 6c6df24f770c..ad9c0f8c6d8c 100644
--- a/drivers/vhost/Makefile
+++ b/drivers/vhost/Makefile
@@ -10,4 +10,7 @@ vhost_vsock-y := vsock.o
 
 obj-$(CONFIG_VHOST_RING) += vringh.o
 
+obj-$(CONFIG_VHOST_MDEV) += vhost_mdev.o
+vhost_mdev-y := mdev.o
+
 obj-$(CONFIG_VHOST)	+= vhost.o
diff --git a/drivers/vhost/mdev.c b/drivers/vhost/mdev.c
new file mode 100644
index 000000000000..1c12a25b86a2
--- /dev/null
+++ b/drivers/vhost/mdev.c
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018-2019 Intel Corporation.
+ */
+
+#include <linux/compat.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/mdev.h>
+#include <linux/module.h>
+#include <linux/vfio.h>
+#include <linux/vhost.h>
+#include <linux/virtio_mdev.h>
+
+#include "vhost.h"
+
+struct vhost_mdev {
+	/* The lock is to protect this structure. */
+	struct mutex mutex;
+	struct vhost_dev dev;
+	struct vhost_virtqueue *vqs;
+	int nvqs;
+	u64 state;
+	u64 features;
+	u64 acked_features;
+	bool opened;
+	struct mdev_device *mdev;
+};
+
+static u8 mdev_get_status(struct mdev_device *mdev)
+{
+	const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(mdev);
+
+	return ops->get_status(mdev);
+}
+
+static void mdev_set_status(struct mdev_device *mdev, u8 status)
+{
+	const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(mdev);
+
+	return ops->set_status(mdev, status);
+}
+
+static void mdev_add_status(struct mdev_device *mdev, u8 status)
+{
+	status |= mdev_get_status(mdev);
+	mdev_set_status(mdev, status);
+}
+
+static void mdev_reset(struct mdev_device *mdev)
+{
+	mdev_set_status(mdev, 0);
+}
+
+static void handle_vq_kick(struct vhost_work *work)
+{
+	struct vhost_virtqueue *vq = container_of(work, struct vhost_virtqueue,
+						  poll.work);
+	struct vhost_mdev *m = container_of(vq->dev, struct vhost_mdev, dev);
+	const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(m->mdev);
+
+	ops->kick_vq(m->mdev, vq - m->vqs);
+}
+
+static irqreturn_t vhost_mdev_virtqueue_cb(void *private)
+{
+	struct vhost_virtqueue *vq = private;
+	struct eventfd_ctx *call_ctx = vq->call_ctx;
+
+	if (call_ctx)
+		eventfd_signal(call_ctx, 1);
+	return IRQ_HANDLED;
+}
+
+static long vhost_mdev_reset(struct vhost_mdev *m)
+{
+	struct mdev_device *mdev = m->mdev;
+
+	mdev_reset(mdev);
+	mdev_add_status(mdev, VIRTIO_CONFIG_S_ACKNOWLEDGE);
+	mdev_add_status(mdev, VIRTIO_CONFIG_S_DRIVER);
+	return 0;
+}
+
+static long vhost_mdev_start(struct vhost_mdev *m)
+{
+	struct mdev_device *mdev = m->mdev;
+	const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(mdev);
+	struct virtio_mdev_callback cb;
+	struct vhost_virtqueue *vq;
+	int idx;
+
+	ops->set_features(mdev, m->acked_features);
+
+	mdev_add_status(mdev, VIRTIO_CONFIG_S_FEATURES_OK);
+	if (!(mdev_get_status(mdev) & VIRTIO_CONFIG_S_FEATURES_OK))
+		goto reset;
+
+	for (idx = 0; idx < m->nvqs; idx++) {
+		vq = &m->vqs[idx];
+
+		if (!vq->desc || !vq->avail || !vq->used)
+			break;
+
+		if (ops->set_vq_state(mdev, idx, vq->last_avail_idx))
+			goto reset;
+
+		/*
+		 * In vhost-mdev, userspace should pass ring addresses
+		 * in guest physical addresses when IOMMU is disabled or
+		 * IOVAs when IOMMU is enabled.
+		 */
+		if (ops->set_vq_address(mdev, idx, (u64)vq->desc,
+					(u64)vq->avail, (u64)vq->used))
+			goto reset;
+
+		ops->set_vq_num(mdev, idx, vq->num);
+
+		cb.callback = vhost_mdev_virtqueue_cb;
+		cb.private = vq;
+		ops->set_vq_cb(mdev, idx, &cb);
+
+		ops->set_vq_ready(mdev, idx, 1);
+	}
+
+	mdev_add_status(mdev, VIRTIO_CONFIG_S_DRIVER_OK);
+	if (mdev_get_status(mdev) & VIRTIO_CONFIG_S_NEEDS_RESET)
+		goto reset;
+	return 0;
+
+reset:
+	vhost_mdev_reset(m);
+	return -ENODEV;
+}
+
+static long vhost_set_state(struct vhost_mdev *m, u64 __user *statep)
+{
+	u64 state;
+	long r;
+
+	if (copy_from_user(&state, statep, sizeof(state)))
+		return -EFAULT;
+
+	if (state >= VHOST_MDEV_S_MAX)
+		return -EINVAL;
+
+	if (m->state == state)
+		return 0;
+
+	m->state = state;
+
+	switch (m->state) {
+	case VHOST_MDEV_S_RUNNING:
+		r = vhost_mdev_start(m);
+		break;
+	case VHOST_MDEV_S_STOPPED:
+		r = vhost_mdev_reset(m);
+		break;
+	default:
+		r = -EINVAL;
+		break;
+	}
+
+	return r;
+}
+
+static long vhost_get_features(struct vhost_mdev *m, u64 __user *featurep)
+{
+	if (copy_to_user(featurep, &m->features, sizeof(m->features)))
+		return -EFAULT;
+	return 0;
+}
+
+static long vhost_set_features(struct vhost_mdev *m, u64 __user *featurep)
+{
+	u64 features;
+
+	if (copy_from_user(&features, featurep, sizeof(features)))
+		return -EFAULT;
+
+	if (features & ~m->features)
+		return -EINVAL;
+
+	m->acked_features = features;
+
+	return 0;
+}
+
+static long vhost_get_vring_base(struct vhost_mdev *m, void __user *argp)
+{
+	const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(m->mdev);
+	struct vhost_virtqueue *vq;
+	u32 idx;
+	long r;
+
+	r = get_user(idx, (u32 __user *)argp);
+	if (r < 0)
+		return r;
+	if (idx >= m->nvqs)
+		return -ENOBUFS;
+
+	vq = &m->vqs[idx];
+	vq->last_avail_idx = ops->get_vq_state(m->mdev, idx);
+
+	return vhost_vring_ioctl(&m->dev, VHOST_GET_VRING_BASE, argp);
+}
+
+static int vhost_mdev_open(void *device_data)
+{
+	struct vhost_mdev *m = device_data;
+	struct vhost_dev *dev;
+	struct vhost_virtqueue **vqs;
+	int nvqs, i, r;
+
+	if (!try_module_get(THIS_MODULE))
+		return -ENODEV;
+
+	mutex_lock(&m->mutex);
+
+	if (m->opened) {
+		r = -EBUSY;
+		goto err;
+	}
+
+	nvqs = m->nvqs;
+	vhost_mdev_reset(m);
+
+	memset(&m->dev, 0, sizeof(m->dev));
+	memset(m->vqs, 0, nvqs * sizeof(struct vhost_virtqueue));
+
+	vqs = kmalloc_array(nvqs, sizeof(*vqs), GFP_KERNEL);
+	if (!vqs) {
+		r = -ENOMEM;
+		goto err;
+	}
+
+	dev = &m->dev;
+	for (i = 0; i < nvqs; i++) {
+		vqs[i] = &m->vqs[i];
+		vqs[i]->handle_kick = handle_vq_kick;
+	}
+	vhost_dev_init(dev, vqs, nvqs, 0, 0, 0);
+	m->opened = true;
+	mutex_unlock(&m->mutex);
+
+	return 0;
+
+err:
+	mutex_unlock(&m->mutex);
+	module_put(THIS_MODULE);
+	return r;
+}
+
+static void vhost_mdev_release(void *device_data)
+{
+	struct vhost_mdev *m = device_data;
+
+	mutex_lock(&m->mutex);
+	vhost_mdev_reset(m);
+	vhost_dev_stop(&m->dev);
+	vhost_dev_cleanup(&m->dev);
+
+	kfree(m->dev.vqs);
+	m->opened = false;
+	mutex_unlock(&m->mutex);
+	module_put(THIS_MODULE);
+}
+
+static long vhost_mdev_unlocked_ioctl(void *device_data,
+				      unsigned int cmd, unsigned long arg)
+{
+	struct vhost_mdev *m = device_data;
+	void __user *argp = (void __user *)arg;
+	long r;
+
+	mutex_lock(&m->mutex);
+
+	switch (cmd) {
+	case VHOST_MDEV_SET_STATE:
+		r = vhost_set_state(m, argp);
+		break;
+	case VHOST_GET_FEATURES:
+		r = vhost_get_features(m, argp);
+		break;
+	case VHOST_SET_FEATURES:
+		r = vhost_set_features(m, argp);
+		break;
+	case VHOST_GET_VRING_BASE:
+		r = vhost_get_vring_base(m, argp);
+		break;
+	default:
+		r = vhost_dev_ioctl(&m->dev, cmd, argp);
+		if (r == -ENOIOCTLCMD)
+			r = vhost_vring_ioctl(&m->dev, cmd, argp);
+	}
+
+	mutex_unlock(&m->mutex);
+	return r;
+}
+
+static const struct vfio_device_ops vfio_vhost_mdev_dev_ops = {
+	.name		= "vfio-vhost-mdev",
+	.open		= vhost_mdev_open,
+	.release	= vhost_mdev_release,
+	.ioctl		= vhost_mdev_unlocked_ioctl,
+};
+
+static int vhost_mdev_probe(struct device *dev)
+{
+	struct mdev_device *mdev = mdev_from_dev(dev);
+	const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(mdev);
+	struct vhost_mdev *m;
+	int nvqs, r;
+
+	m = kzalloc(sizeof(*m), GFP_KERNEL | __GFP_RETRY_MAYFAIL);
+	if (!m)
+		return -ENOMEM;
+
+	mutex_init(&m->mutex);
+
+	nvqs = ops->get_queue_max(mdev);
+	m->nvqs = nvqs;
+
+	m->vqs = kmalloc_array(nvqs, sizeof(struct vhost_virtqueue),
+			       GFP_KERNEL);
+	if (!m->vqs) {
+		r = -ENOMEM;
+		goto err;
+	}
+
+	r = vfio_add_group_dev(dev, &vfio_vhost_mdev_dev_ops, m);
+	if (r)
+		goto err;
+
+	m->features = ops->get_features(mdev);
+	m->mdev = mdev;
+	return 0;
+
+err:
+	kfree(m->vqs);
+	kfree(m);
+	return r;
+}
+
+static void vhost_mdev_remove(struct device *dev)
+{
+	struct vhost_mdev *m;
+
+	m = vfio_del_group_dev(dev);
+	mutex_destroy(&m->mutex);
+	kfree(m->vqs);
+	kfree(m);
+}
+
+static struct mdev_class_id id_table[] = {
+	{ MDEV_ID_VHOST },
+	{ 0 },
+};
+
+static struct mdev_driver vhost_mdev_driver = {
+	.name	= "vhost_mdev",
+	.probe	= vhost_mdev_probe,
+	.remove	= vhost_mdev_remove,
+	.id_table = id_table,
+};
+
+static int __init vhost_mdev_init(void)
+{
+	return mdev_register_driver(&vhost_mdev_driver, THIS_MODULE);
+}
+module_init(vhost_mdev_init);
+
+static void __exit vhost_mdev_exit(void)
+{
+	mdev_unregister_driver(&vhost_mdev_driver);
+}
+module_exit(vhost_mdev_exit);
+
+MODULE_VERSION("0.0.1");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Mediated device based accelerator for virtio");
diff --git a/include/uapi/linux/vhost.h b/include/uapi/linux/vhost.h
index 40d028eed645..5afbc2f08fa3 100644
--- a/include/uapi/linux/vhost.h
+++ b/include/uapi/linux/vhost.h
@@ -116,4 +116,12 @@
 #define VHOST_VSOCK_SET_GUEST_CID	_IOW(VHOST_VIRTIO, 0x60, __u64)
 #define VHOST_VSOCK_SET_RUNNING		_IOW(VHOST_VIRTIO, 0x61, int)
 
+/* VHOST_MDEV specific defines */
+
+#define VHOST_MDEV_SET_STATE	_IOW(VHOST_VIRTIO, 0x70, __u64)
+
+#define VHOST_MDEV_S_STOPPED	0
+#define VHOST_MDEV_S_RUNNING	1
+#define VHOST_MDEV_S_MAX	2
+
 #endif
-- 
2.17.1

Michael S. Tsirkin

2019-Sep-26 08:35 UTC

head link

[PATCH] vhost: introduce mdev based hardware backend

On Thu, Sep 26, 2019 at 12:54:27PM +0800, Tiwei Bie
wrote:> This patch introduces a mdev based hardware vhost backend.
> This backend is built on top of the same abstraction used
> in virtio-mdev and provides a generic vhost interface for
> userspace to accelerate the virtio devices in guest.
> 
> This backend is implemented as a mdev device driver on top
> of the same mdev device ops used in virtio-mdev but using
> a different mdev class id, and it will register the device
> as a VFIO device for userspace to use. Userspace can setup
> the IOMMU with the existing VFIO container/group APIs and
> then get the device fd with the device name. After getting
> the device fd of this device, userspace can use vhost ioctls
> to setup the backend.
> 
> Signed-off-by: Tiwei Bie <tiwei.bie at intel.com>
> ---
> This patch depends on below series:
> https://lkml.org/lkml/2019/9/24/357
> 
> RFC v4 -> v1:
> - Implement vhost-mdev as a mdev device driver directly and
>   connect it to VFIO container/group. (Jason);
> - Pass ring addresses as GPAs/IOVAs in vhost-mdev to avoid
>   meaningless HVA->GPA translations (Jason);
> 
> RFC v3 -> RFC v4:
> - Build vhost-mdev on top of the same abstraction used by
>   virtio-mdev (Jason);
> - Introduce vhost fd and pass VFIO fd via SET_BACKEND ioctl (MST);
> 
> RFC v2 -> RFC v3:
> - Reuse vhost's ioctls instead of inventing a VFIO regions/irqs
>   based vhost protocol on top of vfio-mdev (Jason);
> 
> RFC v1 -> RFC v2:
> - Introduce a new VFIO device type to build a vhost protocol
>   on top of vfio-mdev;
> 
>  drivers/vhost/Kconfig      |   9 +
>  drivers/vhost/Makefile     |   3 +
>  drivers/vhost/mdev.c       | 381 +++++++++++++++++++++++++++++++++++++
>  include/uapi/linux/vhost.h |   8 +
>  4 files changed, 401 insertions(+)
>  create mode 100644 drivers/vhost/mdev.c
> 
> diff --git a/drivers/vhost/Kconfig b/drivers/vhost/Kconfig
> index 3d03ccbd1adc..decf0be8efe9 100644
> --- a/drivers/vhost/Kconfig
> +++ b/drivers/vhost/Kconfig
> @@ -34,6 +34,15 @@ config VHOST_VSOCK
>  	To compile this driver as a module, choose M here: the module will be
called
>  	vhost_vsock.
>  
> +config VHOST_MDEV
> +	tristate "Vhost driver for Mediated devices"
> +	depends on EVENTFD && VFIO && VFIO_MDEV
> +	select VHOST
> +	default n
> +	---help---
> +	Say M here to enable the vhost_mdev module for use with
> +	the mediated device based hardware vhost accelerators
> +
>  config VHOST
>  	tristate
>  	---help---
> diff --git a/drivers/vhost/Makefile b/drivers/vhost/Makefile
> index 6c6df24f770c..ad9c0f8c6d8c 100644
> --- a/drivers/vhost/Makefile
> +++ b/drivers/vhost/Makefile
> @@ -10,4 +10,7 @@ vhost_vsock-y := vsock.o
>  
>  obj-$(CONFIG_VHOST_RING) += vringh.o
>  
> +obj-$(CONFIG_VHOST_MDEV) += vhost_mdev.o
> +vhost_mdev-y := mdev.o
> +
>  obj-$(CONFIG_VHOST)	+= vhost.o
> diff --git a/drivers/vhost/mdev.c b/drivers/vhost/mdev.c
> new file mode 100644
> index 000000000000..1c12a25b86a2
> --- /dev/null
> +++ b/drivers/vhost/mdev.c
> @@ -0,0 +1,381 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2018-2019 Intel Corporation.
> + */
> +
> +#include <linux/compat.h>
> +#include <linux/kernel.h>
> +#include <linux/miscdevice.h>
> +#include <linux/mdev.h>
> +#include <linux/module.h>
> +#include <linux/vfio.h>
> +#include <linux/vhost.h>
> +#include <linux/virtio_mdev.h>
> +
> +#include "vhost.h"
> +
> +struct vhost_mdev {
> +	/* The lock is to protect this structure. */
> +	struct mutex mutex;
> +	struct vhost_dev dev;
> +	struct vhost_virtqueue *vqs;
> +	int nvqs;
> +	u64 state;
> +	u64 features;
> +	u64 acked_features;
> +	bool opened;
> +	struct mdev_device *mdev;
> +};
> +
> +static u8 mdev_get_status(struct mdev_device *mdev)
> +{
> +	const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(mdev);
> +
> +	return ops->get_status(mdev);
> +}
> +
> +static void mdev_set_status(struct mdev_device *mdev, u8 status)
> +{
> +	const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(mdev);
> +
> +	return ops->set_status(mdev, status);
> +}
> +
> +static void mdev_add_status(struct mdev_device *mdev, u8 status)
> +{
> +	status |= mdev_get_status(mdev);
> +	mdev_set_status(mdev, status);
> +}
> +
> +static void mdev_reset(struct mdev_device *mdev)
> +{
> +	mdev_set_status(mdev, 0);
> +}
> +
> +static void handle_vq_kick(struct vhost_work *work)
> +{
> +	struct vhost_virtqueue *vq = container_of(work, struct vhost_virtqueue,
> +						  poll.work);
> +	struct vhost_mdev *m = container_of(vq->dev, struct vhost_mdev, dev);
> +	const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(m->mdev);
> +
> +	ops->kick_vq(m->mdev, vq - m->vqs);
> +}
> +
> +static irqreturn_t vhost_mdev_virtqueue_cb(void *private)
> +{
> +	struct vhost_virtqueue *vq = private;
> +	struct eventfd_ctx *call_ctx = vq->call_ctx;
> +
> +	if (call_ctx)
> +		eventfd_signal(call_ctx, 1);
> +	return IRQ_HANDLED;
> +}
> +
> +static long vhost_mdev_reset(struct vhost_mdev *m)
> +{
> +	struct mdev_device *mdev = m->mdev;
> +
> +	mdev_reset(mdev);
> +	mdev_add_status(mdev, VIRTIO_CONFIG_S_ACKNOWLEDGE);
> +	mdev_add_status(mdev, VIRTIO_CONFIG_S_DRIVER);
> +	return 0;
> +}
> +
> +static long vhost_mdev_start(struct vhost_mdev *m)
> +{
> +	struct mdev_device *mdev = m->mdev;
> +	const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(mdev);
> +	struct virtio_mdev_callback cb;
> +	struct vhost_virtqueue *vq;
> +	int idx;
> +
> +	ops->set_features(mdev, m->acked_features);
> +
> +	mdev_add_status(mdev, VIRTIO_CONFIG_S_FEATURES_OK);
> +	if (!(mdev_get_status(mdev) & VIRTIO_CONFIG_S_FEATURES_OK))
> +		goto reset;
> +
> +	for (idx = 0; idx < m->nvqs; idx++) {
> +		vq = &m->vqs[idx];
> +
> +		if (!vq->desc || !vq->avail || !vq->used)
> +			break;
> +
> +		if (ops->set_vq_state(mdev, idx, vq->last_avail_idx))
> +			goto reset;
> +
> +		/*
> +		 * In vhost-mdev, userspace should pass ring addresses
> +		 * in guest physical addresses when IOMMU is disabled or
> +		 * IOVAs when IOMMU is enabled.
> +		 */
> +		if (ops->set_vq_address(mdev, idx, (u64)vq->desc,
> +					(u64)vq->avail, (u64)vq->used))
> +			goto reset;
> +
> +		ops->set_vq_num(mdev, idx, vq->num);
> +
> +		cb.callback = vhost_mdev_virtqueue_cb;
> +		cb.private = vq;
> +		ops->set_vq_cb(mdev, idx, &cb);
> +
> +		ops->set_vq_ready(mdev, idx, 1);
> +	}
> +
> +	mdev_add_status(mdev, VIRTIO_CONFIG_S_DRIVER_OK);
> +	if (mdev_get_status(mdev) & VIRTIO_CONFIG_S_NEEDS_RESET)
> +		goto reset;
> +	return 0;
> +
> +reset:
> +	vhost_mdev_reset(m);
> +	return -ENODEV;
> +}
> +
> +static long vhost_set_state(struct vhost_mdev *m, u64 __user *statep)
> +{
> +	u64 state;
> +	long r;
> +
> +	if (copy_from_user(&state, statep, sizeof(state)))
> +		return -EFAULT;
> +
> +	if (state >= VHOST_MDEV_S_MAX)
> +		return -EINVAL;
> +
> +	if (m->state == state)
> +		return 0;
> +
> +	m->state = state;
> +
> +	switch (m->state) {
> +	case VHOST_MDEV_S_RUNNING:
> +		r = vhost_mdev_start(m);
> +		break;
> +	case VHOST_MDEV_S_STOPPED:
> +		r = vhost_mdev_reset(m);
> +		break;
> +	default:
> +		r = -EINVAL;
> +		break;
> +	}
> +
> +	return r;
> +}
> +
> +static long vhost_get_features(struct vhost_mdev *m, u64 __user *featurep)
> +{
> +	if (copy_to_user(featurep, &m->features, sizeof(m->features)))
> +		return -EFAULT;
> +	return 0;
> +}
> +
> +static long vhost_set_features(struct vhost_mdev *m, u64 __user *featurep)
> +{
> +	u64 features;
> +
> +	if (copy_from_user(&features, featurep, sizeof(features)))
> +		return -EFAULT;
> +
> +	if (features & ~m->features)
> +		return -EINVAL;
> +
> +	m->acked_features = features;
> +
> +	return 0;
> +}
> +
> +static long vhost_get_vring_base(struct vhost_mdev *m, void __user *argp)
> +{
> +	const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(m->mdev);
> +	struct vhost_virtqueue *vq;
> +	u32 idx;
> +	long r;
> +
> +	r = get_user(idx, (u32 __user *)argp);
> +	if (r < 0)
> +		return r;
> +	if (idx >= m->nvqs)
> +		return -ENOBUFS;
> +
> +	vq = &m->vqs[idx];
> +	vq->last_avail_idx = ops->get_vq_state(m->mdev, idx);
> +
> +	return vhost_vring_ioctl(&m->dev, VHOST_GET_VRING_BASE, argp);
> +}
> +
> +static int vhost_mdev_open(void *device_data)
> +{
> +	struct vhost_mdev *m = device_data;
> +	struct vhost_dev *dev;
> +	struct vhost_virtqueue **vqs;
> +	int nvqs, i, r;
> +
> +	if (!try_module_get(THIS_MODULE))
> +		return -ENODEV;
> +
> +	mutex_lock(&m->mutex);
> +
> +	if (m->opened) {
> +		r = -EBUSY;
> +		goto err;
> +	}
> +
> +	nvqs = m->nvqs;
> +	vhost_mdev_reset(m);
> +
> +	memset(&m->dev, 0, sizeof(m->dev));
> +	memset(m->vqs, 0, nvqs * sizeof(struct vhost_virtqueue));
> +
> +	vqs = kmalloc_array(nvqs, sizeof(*vqs), GFP_KERNEL);
> +	if (!vqs) {
> +		r = -ENOMEM;
> +		goto err;
> +	}
> +
> +	dev = &m->dev;
> +	for (i = 0; i < nvqs; i++) {
> +		vqs[i] = &m->vqs[i];
> +		vqs[i]->handle_kick = handle_vq_kick;
> +	}
> +	vhost_dev_init(dev, vqs, nvqs, 0, 0, 0);
> +	m->opened = true;
> +	mutex_unlock(&m->mutex);
> +
> +	return 0;
> +
> +err:
> +	mutex_unlock(&m->mutex);
> +	module_put(THIS_MODULE);
> +	return r;
> +}
> +
> +static void vhost_mdev_release(void *device_data)
> +{
> +	struct vhost_mdev *m = device_data;
> +
> +	mutex_lock(&m->mutex);
> +	vhost_mdev_reset(m);
> +	vhost_dev_stop(&m->dev);
> +	vhost_dev_cleanup(&m->dev);
> +
> +	kfree(m->dev.vqs);
> +	m->opened = false;
> +	mutex_unlock(&m->mutex);
> +	module_put(THIS_MODULE);
> +}
> +
> +static long vhost_mdev_unlocked_ioctl(void *device_data,
> +				      unsigned int cmd, unsigned long arg)
> +{
> +	struct vhost_mdev *m = device_data;
> +	void __user *argp = (void __user *)arg;
> +	long r;
> +
> +	mutex_lock(&m->mutex);
> +
> +	switch (cmd) {
> +	case VHOST_MDEV_SET_STATE:
> +		r = vhost_set_state(m, argp);
> +		break;
> +	case VHOST_GET_FEATURES:
> +		r = vhost_get_features(m, argp);
> +		break;
> +	case VHOST_SET_FEATURES:
> +		r = vhost_set_features(m, argp);
> +		break;
> +	case VHOST_GET_VRING_BASE:
> +		r = vhost_get_vring_base(m, argp);
> +		break;
> +	default:
> +		r = vhost_dev_ioctl(&m->dev, cmd, argp);
> +		if (r == -ENOIOCTLCMD)
> +			r = vhost_vring_ioctl(&m->dev, cmd, argp);
> +	}
> +
> +	mutex_unlock(&m->mutex);
> +	return r;
> +}
> +
> +static const struct vfio_device_ops vfio_vhost_mdev_dev_ops = {
> +	.name		= "vfio-vhost-mdev",
> +	.open		= vhost_mdev_open,
> +	.release	= vhost_mdev_release,
> +	.ioctl		= vhost_mdev_unlocked_ioctl,
> +};
> +
> +static int vhost_mdev_probe(struct device *dev)
> +{
> +	struct mdev_device *mdev = mdev_from_dev(dev);
> +	const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(mdev);
> +	struct vhost_mdev *m;
> +	int nvqs, r;
> +
> +	m = kzalloc(sizeof(*m), GFP_KERNEL | __GFP_RETRY_MAYFAIL);
> +	if (!m)
> +		return -ENOMEM;
> +
> +	mutex_init(&m->mutex);
> +
> +	nvqs = ops->get_queue_max(mdev);
> +	m->nvqs = nvqs;
> +
> +	m->vqs = kmalloc_array(nvqs, sizeof(struct vhost_virtqueue),
> +			       GFP_KERNEL);
> +	if (!m->vqs) {
> +		r = -ENOMEM;
> +		goto err;
> +	}
> +
> +	r = vfio_add_group_dev(dev, &vfio_vhost_mdev_dev_ops, m);
> +	if (r)
> +		goto err;
> +
> +	m->features = ops->get_features(mdev);
> +	m->mdev = mdev;
> +	return 0;
> +
> +err:
> +	kfree(m->vqs);
> +	kfree(m);
> +	return r;
> +}
> +
> +static void vhost_mdev_remove(struct device *dev)
> +{
> +	struct vhost_mdev *m;
> +
> +	m = vfio_del_group_dev(dev);
> +	mutex_destroy(&m->mutex);
> +	kfree(m->vqs);
> +	kfree(m);
> +}
> +
> +static struct mdev_class_id id_table[] = {
> +	{ MDEV_ID_VHOST },
> +	{ 0 },
> +};
> +
> +static struct mdev_driver vhost_mdev_driver = {
> +	.name	= "vhost_mdev",
> +	.probe	= vhost_mdev_probe,
> +	.remove	= vhost_mdev_remove,
> +	.id_table = id_table,
> +};
> +
> +static int __init vhost_mdev_init(void)
> +{
> +	return mdev_register_driver(&vhost_mdev_driver, THIS_MODULE);
> +}
> +module_init(vhost_mdev_init);
> +
> +static void __exit vhost_mdev_exit(void)
> +{
> +	mdev_unregister_driver(&vhost_mdev_driver);
> +}
> +module_exit(vhost_mdev_exit);
> +
> +MODULE_VERSION("0.0.1");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("Mediated device based accelerator for
virtio");
> diff --git a/include/uapi/linux/vhost.h b/include/uapi/linux/vhost.h
> index 40d028eed645..5afbc2f08fa3 100644
> --- a/include/uapi/linux/vhost.h
> +++ b/include/uapi/linux/vhost.h
> @@ -116,4 +116,12 @@
>  #define VHOST_VSOCK_SET_GUEST_CID	_IOW(VHOST_VIRTIO, 0x60, __u64)
>  #define VHOST_VSOCK_SET_RUNNING		_IOW(VHOST_VIRTIO, 0x61, int)
>  
> +/* VHOST_MDEV specific defines */
> +
> +#define VHOST_MDEV_SET_STATE	_IOW(VHOST_VIRTIO, 0x70, __u64)
> +
> +#define VHOST_MDEV_S_STOPPED	0
> +#define VHOST_MDEV_S_RUNNING	1
> +#define VHOST_MDEV_S_MAX	2
> +
>  #endif
So assuming we have an underlying device that behaves like virtio:

1. Should we use SET_STATUS maybe?
2. Do we want a reset ioctl?
3. Do we want ability to enable rings individually?
4. Does device need to limit max ring size?
5. Does device need to limit max number of queues?

-- 
MST

Tiwei Bie

2019-Sep-26 13:14 UTC

head link

[PATCH] vhost: introduce mdev based hardware backend

On Thu, Sep 26, 2019 at 04:35:18AM -0400, Michael S. Tsirkin
wrote:> On Thu, Sep 26, 2019 at 12:54:27PM +0800, Tiwei Bie wrote:
[...]> > diff --git a/include/uapi/linux/vhost.h b/include/uapi/linux/vhost.h
> > index 40d028eed645..5afbc2f08fa3 100644
> > --- a/include/uapi/linux/vhost.h
> > +++ b/include/uapi/linux/vhost.h
> > @@ -116,4 +116,12 @@
> >  #define VHOST_VSOCK_SET_GUEST_CID	_IOW(VHOST_VIRTIO, 0x60, __u64)
> >  #define VHOST_VSOCK_SET_RUNNING		_IOW(VHOST_VIRTIO, 0x61, int)
> >  
> > +/* VHOST_MDEV specific defines */
> > +
> > +#define VHOST_MDEV_SET_STATE	_IOW(VHOST_VIRTIO, 0x70, __u64)
> > +
> > +#define VHOST_MDEV_S_STOPPED	0
> > +#define VHOST_MDEV_S_RUNNING	1
> > +#define VHOST_MDEV_S_MAX	2
> > +
> >  #endif
> 
> So assuming we have an underlying device that behaves like virtio:
I think they are really good questions/suggestions. Thanks!
> 
> 1. Should we use SET_STATUS maybe?
I like this idea. I will give it a try.
> 2. Do we want a reset ioctl?
I think it is helpful. If we use SET_STATUS, maybe we
can use it to support the reset.
> 3. Do we want ability to enable rings individually?
I will make it possible at least in the vhost layer.
> 4. Does device need to limit max ring size?
> 5. Does device need to limit max number of queues?
I think so. It's helpful to have ioctls to report the max
ring size and max number of queues.

Thanks!
Tiwei

> 
> -- 
> MST

kbuild test robot

2019-Sep-26 14:05 UTC

head link

[PATCH] vhost: introduce mdev based hardware backend

Hi Tiwei,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on vhost/linux-next]
[cannot apply to v5.3 next-20190925]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system. BTW, we also suggest to use '--base' option to
specify the
base tree in git format-patch, please see https://stackoverflow.com/a/37406982]

url:   
https://github.com/0day-ci/linux/commits/Tiwei-Bie/vhost-introduce-mdev-based-hardware-backend/20190926-125932
base:   https://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost.git linux-next
config: x86_64-allyesconfig (attached as .config)
compiler: gcc-7 (Debian 7.4.0-13) 7.4.0
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

If you fix the issue, kindly add following tag
Reported-by: kbuild test robot <lkp at intel.com>

All errors (new ones prefixed by >>):
>> drivers/vhost/mdev.c:13:10: fatal error: linux/virtio_mdev.h: No such
file or directory    #include <linux/virtio_mdev.h>
             ^~~~~~~~~~~~~~~~~~~~~
   compilation terminated.

vim +13 drivers/vhost/mdev.c

  > 13	#include <linux/virtio_mdev.h>
    14	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
-------------- next part --------------
A non-text attachment was scrubbed...
Name: .config.gz
Type: application/gzip
Size: 69514 bytes
Desc: not available
URL:
<http://lists.linuxfoundation.org/pipermail/virtualization/attachments/20190926/324e0d8e/attachment-0001.bin>

Jason Wang

2019-Sep-27 03:46 UTC

head link

[PATCH] vhost: introduce mdev based hardware backend

On 2019/9/26 ??12:54, Tiwei Bie wrote:> This patch introduces a mdev based hardware vhost backend.
> This backend is built on top of the same abstraction used
> in virtio-mdev and provides a generic vhost interface for
> userspace to accelerate the virtio devices in guest.
>
> This backend is implemented as a mdev device driver on top
> of the same mdev device ops used in virtio-mdev but using
> a different mdev class id, and it will register the device
> as a VFIO device for userspace to use. Userspace can setup
> the IOMMU with the existing VFIO container/group APIs and
> then get the device fd with the device name. After getting
> the device fd of this device, userspace can use vhost ioctls
> to setup the backend.
>
> Signed-off-by: Tiwei Bie <tiwei.bie at intel.com>
> ---
> This patch depends on below series:
> https://lkml.org/lkml/2019/9/24/357

Looks pretty nice, comments inline.

>
> RFC v4 -> v1:
> - Implement vhost-mdev as a mdev device driver directly and
>    connect it to VFIO container/group. (Jason);
> - Pass ring addresses as GPAs/IOVAs in vhost-mdev to avoid
>    meaningless HVA->GPA translations (Jason);
>
> RFC v3 -> RFC v4:
> - Build vhost-mdev on top of the same abstraction used by
>    virtio-mdev (Jason);
> - Introduce vhost fd and pass VFIO fd via SET_BACKEND ioctl (MST);
>
> RFC v2 -> RFC v3:
> - Reuse vhost's ioctls instead of inventing a VFIO regions/irqs
>    based vhost protocol on top of vfio-mdev (Jason);
>
> RFC v1 -> RFC v2:
> - Introduce a new VFIO device type to build a vhost protocol
>    on top of vfio-mdev;
>
>   drivers/vhost/Kconfig      |   9 +
>   drivers/vhost/Makefile     |   3 +
>   drivers/vhost/mdev.c       | 381 +++++++++++++++++++++++++++++++++++++
>   include/uapi/linux/vhost.h |   8 +
>   4 files changed, 401 insertions(+)
>   create mode 100644 drivers/vhost/mdev.c
>
> diff --git a/drivers/vhost/Kconfig b/drivers/vhost/Kconfig
> index 3d03ccbd1adc..decf0be8efe9 100644
> --- a/drivers/vhost/Kconfig
> +++ b/drivers/vhost/Kconfig
> @@ -34,6 +34,15 @@ config VHOST_VSOCK
>   	To compile this driver as a module, choose M here: the module will be
called
>   	vhost_vsock.
>   
> +config VHOST_MDEV
> +	tristate "Vhost driver for Mediated devices"
> +	depends on EVENTFD && VFIO && VFIO_MDEV
> +	select VHOST
> +	default n
> +	---help---
> +	Say M here to enable the vhost_mdev module for use with
> +	the mediated device based hardware vhost accelerators
> +
>   config VHOST
>   	tristate
>   	---help---
> diff --git a/drivers/vhost/Makefile b/drivers/vhost/Makefile
> index 6c6df24f770c..ad9c0f8c6d8c 100644
> --- a/drivers/vhost/Makefile
> +++ b/drivers/vhost/Makefile
> @@ -10,4 +10,7 @@ vhost_vsock-y := vsock.o
>   
>   obj-$(CONFIG_VHOST_RING) += vringh.o
>   
> +obj-$(CONFIG_VHOST_MDEV) += vhost_mdev.o
> +vhost_mdev-y := mdev.o
> +
>   obj-$(CONFIG_VHOST)	+= vhost.o
> diff --git a/drivers/vhost/mdev.c b/drivers/vhost/mdev.c
> new file mode 100644
> index 000000000000..1c12a25b86a2
> --- /dev/null
> +++ b/drivers/vhost/mdev.c
> @@ -0,0 +1,381 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2018-2019 Intel Corporation.
> + */
> +
> +#include <linux/compat.h>
> +#include <linux/kernel.h>
> +#include <linux/miscdevice.h>
> +#include <linux/mdev.h>
> +#include <linux/module.h>
> +#include <linux/vfio.h>
> +#include <linux/vhost.h>
> +#include <linux/virtio_mdev.h>
> +
> +#include "vhost.h"
> +
> +struct vhost_mdev {
> +	/* The lock is to protect this structure. */
> +	struct mutex mutex;
> +	struct vhost_dev dev;
> +	struct vhost_virtqueue *vqs;
> +	int nvqs;
> +	u64 state;
> +	u64 features;
> +	u64 acked_features;
> +	bool opened;
> +	struct mdev_device *mdev;
> +};
> +
> +static u8 mdev_get_status(struct mdev_device *mdev)
> +{
> +	const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(mdev);
> +
> +	return ops->get_status(mdev);
> +}
> +
> +static void mdev_set_status(struct mdev_device *mdev, u8 status)
> +{
> +	const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(mdev);
> +
> +	return ops->set_status(mdev, status);
> +}
> +
> +static void mdev_add_status(struct mdev_device *mdev, u8 status)
> +{
> +	status |= mdev_get_status(mdev);
> +	mdev_set_status(mdev, status);
> +}
> +
> +static void mdev_reset(struct mdev_device *mdev)
> +{
> +	mdev_set_status(mdev, 0);
> +}
> +
> +static void handle_vq_kick(struct vhost_work *work)
> +{
> +	struct vhost_virtqueue *vq = container_of(work, struct vhost_virtqueue,
> +						  poll.work);
> +	struct vhost_mdev *m = container_of(vq->dev, struct vhost_mdev, dev);
> +	const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(m->mdev);
> +
> +	ops->kick_vq(m->mdev, vq - m->vqs);
> +}
> +
> +static irqreturn_t vhost_mdev_virtqueue_cb(void *private)
> +{
> +	struct vhost_virtqueue *vq = private;
> +	struct eventfd_ctx *call_ctx = vq->call_ctx;
> +
> +	if (call_ctx)
> +		eventfd_signal(call_ctx, 1);
> +	return IRQ_HANDLED;
> +}
> +
> +static long vhost_mdev_reset(struct vhost_mdev *m)
> +{
> +	struct mdev_device *mdev = m->mdev;
> +
> +	mdev_reset(mdev);
> +	mdev_add_status(mdev, VIRTIO_CONFIG_S_ACKNOWLEDGE);
> +	mdev_add_status(mdev, VIRTIO_CONFIG_S_DRIVER);
> +	return 0;
> +}
> +
> +static long vhost_mdev_start(struct vhost_mdev *m)
> +{
> +	struct mdev_device *mdev = m->mdev;
> +	const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(mdev);
> +	struct virtio_mdev_callback cb;
> +	struct vhost_virtqueue *vq;
> +	int idx;
> +
> +	ops->set_features(mdev, m->acked_features);
> +
> +	mdev_add_status(mdev, VIRTIO_CONFIG_S_FEATURES_OK);
> +	if (!(mdev_get_status(mdev) & VIRTIO_CONFIG_S_FEATURES_OK))
> +		goto reset;
> +
> +	for (idx = 0; idx < m->nvqs; idx++) {
> +		vq = &m->vqs[idx];
> +
> +		if (!vq->desc || !vq->avail || !vq->used)
> +			break;
> +
> +		if (ops->set_vq_state(mdev, idx, vq->last_avail_idx))
> +			goto reset;

If we do set_vq_state() in SET_VRING_BASE, we won't need this step here.

> +
> +		/*
> +		 * In vhost-mdev, userspace should pass ring addresses
> +		 * in guest physical addresses when IOMMU is disabled or
> +		 * IOVAs when IOMMU is enabled.
> +		 */

A question here, consider we're using noiommu mode. If guest physical 
address is passed here, how can a device use that?

I believe you meant "host physical address" here? And it also have the
implication that the HPA should be continuous (e.g using hugetlbfs).

Thanks

> +		if (ops->set_vq_address(mdev, idx, (u64)vq->desc,
> +					(u64)vq->avail, (u64)vq->used))
> +			goto reset;
> +
> +		ops->set_vq_num(mdev, idx, vq->num);
> +
> +		cb.callback = vhost_mdev_virtqueue_cb;
> +		cb.private = vq;
> +		ops->set_vq_cb(mdev, idx, &cb);
> +
> +		ops->set_vq_ready(mdev, idx, 1);
> +	}
> +
> +	mdev_add_status(mdev, VIRTIO_CONFIG_S_DRIVER_OK);
> +	if (mdev_get_status(mdev) & VIRTIO_CONFIG_S_NEEDS_RESET)
> +		goto reset;
> +	return 0;
> +
> +reset:
> +	vhost_mdev_reset(m);
> +	return -ENODEV;
> +}
> +
> +static long vhost_set_state(struct vhost_mdev *m, u64 __user *statep)
> +{
> +	u64 state;
> +	long r;
> +
> +	if (copy_from_user(&state, statep, sizeof(state)))
> +		return -EFAULT;
> +
> +	if (state >= VHOST_MDEV_S_MAX)
> +		return -EINVAL;
> +
> +	if (m->state == state)
> +		return 0;
> +
> +	m->state = state;
> +
> +	switch (m->state) {
> +	case VHOST_MDEV_S_RUNNING:
> +		r = vhost_mdev_start(m);
> +		break;
> +	case VHOST_MDEV_S_STOPPED:
> +		r = vhost_mdev_reset(m);
> +		break;
> +	default:
> +		r = -EINVAL;
> +		break;
> +	}
> +
> +	return r;
> +}
> +
> +static long vhost_get_features(struct vhost_mdev *m, u64 __user *featurep)
> +{
> +	if (copy_to_user(featurep, &m->features, sizeof(m->features)))
> +		return -EFAULT;
> +	return 0;
> +}
> +
> +static long vhost_set_features(struct vhost_mdev *m, u64 __user *featurep)
> +{
> +	u64 features;
> +
> +	if (copy_from_user(&features, featurep, sizeof(features)))
> +		return -EFAULT;
> +
> +	if (features & ~m->features)
> +		return -EINVAL;
> +
> +	m->acked_features = features;
> +
> +	return 0;
> +}
> +
> +static long vhost_get_vring_base(struct vhost_mdev *m, void __user *argp)
> +{
> +	const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(m->mdev);
> +	struct vhost_virtqueue *vq;
> +	u32 idx;
> +	long r;
> +
> +	r = get_user(idx, (u32 __user *)argp);
> +	if (r < 0)
> +		return r;
> +	if (idx >= m->nvqs)
> +		return -ENOBUFS;
> +
> +	vq = &m->vqs[idx];
> +	vq->last_avail_idx = ops->get_vq_state(m->mdev, idx);
> +
> +	return vhost_vring_ioctl(&m->dev, VHOST_GET_VRING_BASE, argp);
> +}
> +
> +static int vhost_mdev_open(void *device_data)
> +{
> +	struct vhost_mdev *m = device_data;
> +	struct vhost_dev *dev;
> +	struct vhost_virtqueue **vqs;
> +	int nvqs, i, r;
> +
> +	if (!try_module_get(THIS_MODULE))
> +		return -ENODEV;
> +
> +	mutex_lock(&m->mutex);
> +
> +	if (m->opened) {
> +		r = -EBUSY;
> +		goto err;
> +	}
> +
> +	nvqs = m->nvqs;
> +	vhost_mdev_reset(m);
> +
> +	memset(&m->dev, 0, sizeof(m->dev));
> +	memset(m->vqs, 0, nvqs * sizeof(struct vhost_virtqueue));
> +
> +	vqs = kmalloc_array(nvqs, sizeof(*vqs), GFP_KERNEL);
> +	if (!vqs) {
> +		r = -ENOMEM;
> +		goto err;
> +	}
> +
> +	dev = &m->dev;
> +	for (i = 0; i < nvqs; i++) {
> +		vqs[i] = &m->vqs[i];
> +		vqs[i]->handle_kick = handle_vq_kick;
> +	}
> +	vhost_dev_init(dev, vqs, nvqs, 0, 0, 0);
> +	m->opened = true;
> +	mutex_unlock(&m->mutex);
> +
> +	return 0;
> +
> +err:
> +	mutex_unlock(&m->mutex);
> +	module_put(THIS_MODULE);
> +	return r;
> +}
> +
> +static void vhost_mdev_release(void *device_data)
> +{
> +	struct vhost_mdev *m = device_data;
> +
> +	mutex_lock(&m->mutex);
> +	vhost_mdev_reset(m);
> +	vhost_dev_stop(&m->dev);
> +	vhost_dev_cleanup(&m->dev);
> +
> +	kfree(m->dev.vqs);
> +	m->opened = false;
> +	mutex_unlock(&m->mutex);
> +	module_put(THIS_MODULE);
> +}
> +
> +static long vhost_mdev_unlocked_ioctl(void *device_data,
> +				      unsigned int cmd, unsigned long arg)
> +{
> +	struct vhost_mdev *m = device_data;
> +	void __user *argp = (void __user *)arg;
> +	long r;
> +
> +	mutex_lock(&m->mutex);
> +
> +	switch (cmd) {
> +	case VHOST_MDEV_SET_STATE:
> +		r = vhost_set_state(m, argp);
> +		break;
> +	case VHOST_GET_FEATURES:
> +		r = vhost_get_features(m, argp);
> +		break;
> +	case VHOST_SET_FEATURES:
> +		r = vhost_set_features(m, argp);
> +		break;
> +	case VHOST_GET_VRING_BASE:
> +		r = vhost_get_vring_base(m, argp);
> +		break;

Does it mean the SET_VRING_BASE may only take affect after 
VHOST_MEV_SET_STATE?

> +	default:
> +		r = vhost_dev_ioctl(&m->dev, cmd, argp);
> +		if (r == -ENOIOCTLCMD)
> +			r = vhost_vring_ioctl(&m->dev, cmd, argp);
> +	}
> +
> +	mutex_unlock(&m->mutex);
> +	return r;
> +}
> +
> +static const struct vfio_device_ops vfio_vhost_mdev_dev_ops = {
> +	.name		= "vfio-vhost-mdev",
> +	.open		= vhost_mdev_open,
> +	.release	= vhost_mdev_release,
> +	.ioctl		= vhost_mdev_unlocked_ioctl,
> +};
> +
> +static int vhost_mdev_probe(struct device *dev)
> +{
> +	struct mdev_device *mdev = mdev_from_dev(dev);
> +	const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(mdev);
> +	struct vhost_mdev *m;
> +	int nvqs, r;
> +
> +	m = kzalloc(sizeof(*m), GFP_KERNEL | __GFP_RETRY_MAYFAIL);
> +	if (!m)
> +		return -ENOMEM;
> +
> +	mutex_init(&m->mutex);
> +
> +	nvqs = ops->get_queue_max(mdev);
> +	m->nvqs = nvqs;

The name could be confusing, get_queue_max() is to get the maximum 
number of entries for a virtqueue supported by this device.

It looks to me that we need another API to query the maximum number of 
virtqueues supported by the device.

Thanks

> +
> +	m->vqs = kmalloc_array(nvqs, sizeof(struct vhost_virtqueue),
> +			       GFP_KERNEL);
> +	if (!m->vqs) {
> +		r = -ENOMEM;
> +		goto err;
> +	}
> +
> +	r = vfio_add_group_dev(dev, &vfio_vhost_mdev_dev_ops, m);
> +	if (r)
> +		goto err;
> +
> +	m->features = ops->get_features(mdev);
> +	m->mdev = mdev;
> +	return 0;
> +
> +err:
> +	kfree(m->vqs);
> +	kfree(m);
> +	return r;
> +}
> +
> +static void vhost_mdev_remove(struct device *dev)
> +{
> +	struct vhost_mdev *m;
> +
> +	m = vfio_del_group_dev(dev);
> +	mutex_destroy(&m->mutex);
> +	kfree(m->vqs);
> +	kfree(m);
> +}
> +
> +static struct mdev_class_id id_table[] = {
> +	{ MDEV_ID_VHOST },
> +	{ 0 },
> +};
> +
> +static struct mdev_driver vhost_mdev_driver = {
> +	.name	= "vhost_mdev",
> +	.probe	= vhost_mdev_probe,
> +	.remove	= vhost_mdev_remove,
> +	.id_table = id_table,
> +};
> +
> +static int __init vhost_mdev_init(void)
> +{
> +	return mdev_register_driver(&vhost_mdev_driver, THIS_MODULE);
> +}
> +module_init(vhost_mdev_init);
> +
> +static void __exit vhost_mdev_exit(void)
> +{
> +	mdev_unregister_driver(&vhost_mdev_driver);
> +}
> +module_exit(vhost_mdev_exit);
> +
> +MODULE_VERSION("0.0.1");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("Mediated device based accelerator for
virtio");
> diff --git a/include/uapi/linux/vhost.h b/include/uapi/linux/vhost.h
> index 40d028eed645..5afbc2f08fa3 100644
> --- a/include/uapi/linux/vhost.h
> +++ b/include/uapi/linux/vhost.h
> @@ -116,4 +116,12 @@
>   #define VHOST_VSOCK_SET_GUEST_CID	_IOW(VHOST_VIRTIO, 0x60, __u64)
>   #define VHOST_VSOCK_SET_RUNNING		_IOW(VHOST_VIRTIO, 0x61, int)
>   
> +/* VHOST_MDEV specific defines */
> +
> +#define VHOST_MDEV_SET_STATE	_IOW(VHOST_VIRTIO, 0x70, __u64)
> +
> +#define VHOST_MDEV_S_STOPPED	0
> +#define VHOST_MDEV_S_RUNNING	1
> +#define VHOST_MDEV_S_MAX	2
> +
>   #endif

Jason Wang

2019-Sep-27 03:51 UTC

head link

[PATCH] vhost: introduce mdev based hardware backend

On 2019/9/27 ??11:46, Jason Wang wrote:> +
> +static struct mdev_class_id id_table[] = {
> +??? { MDEV_ID_VHOST },
> +??? { 0 },
> +};
> +
> +static struct mdev_driver vhost_mdev_driver = {
> +??? .name??? = "vhost_mdev",
> +??? .probe??? = vhost_mdev_probe,
> +??? .remove??? = vhost_mdev_remove,
> +??? .id_table = id_table,
> +};
> + 

And you probably need to add MODULE_DEVICE_TABLE() as well.

Thanks

Tiwei Bie

2019-Sep-27 04:54 UTC

head link

[PATCH] vhost: introduce mdev based hardware backend

On Fri, Sep 27, 2019 at 11:46:06AM +0800, Jason Wang
wrote:> On 2019/9/26 ??12:54, Tiwei Bie wrote:
> > +
> > +static long vhost_mdev_start(struct vhost_mdev *m)
> > +{
> > +	struct mdev_device *mdev = m->mdev;
> > +	const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(mdev);
> > +	struct virtio_mdev_callback cb;
> > +	struct vhost_virtqueue *vq;
> > +	int idx;
> > +
> > +	ops->set_features(mdev, m->acked_features);
> > +
> > +	mdev_add_status(mdev, VIRTIO_CONFIG_S_FEATURES_OK);
> > +	if (!(mdev_get_status(mdev) & VIRTIO_CONFIG_S_FEATURES_OK))
> > +		goto reset;
> > +
> > +	for (idx = 0; idx < m->nvqs; idx++) {
> > +		vq = &m->vqs[idx];
> > +
> > +		if (!vq->desc || !vq->avail || !vq->used)
> > +			break;
> > +
> > +		if (ops->set_vq_state(mdev, idx, vq->last_avail_idx))
> > +			goto reset;
> 
> 
> If we do set_vq_state() in SET_VRING_BASE, we won't need this step
here.
Yeah, I plan to do it in the next version.
> 
> 
> > +
> > +		/*
> > +		 * In vhost-mdev, userspace should pass ring addresses
> > +		 * in guest physical addresses when IOMMU is disabled or
> > +		 * IOVAs when IOMMU is enabled.
> > +		 */
> 
> 
> A question here, consider we're using noiommu mode. If guest physical
> address is passed here, how can a device use that?
> 
> I believe you meant "host physical address" here? And it also
have the
> implication that the HPA should be continuous (e.g using hugetlbfs).
The comment is talking about the virtual IOMMU (i.e. iotlb in vhost).
It should be rephrased to cover the noiommu case as well. Thanks for
spotting this.

> > +
> > +	switch (cmd) {
> > +	case VHOST_MDEV_SET_STATE:
> > +		r = vhost_set_state(m, argp);
> > +		break;
> > +	case VHOST_GET_FEATURES:
> > +		r = vhost_get_features(m, argp);
> > +		break;
> > +	case VHOST_SET_FEATURES:
> > +		r = vhost_set_features(m, argp);
> > +		break;
> > +	case VHOST_GET_VRING_BASE:
> > +		r = vhost_get_vring_base(m, argp);
> > +		break;
> 
> 
> Does it mean the SET_VRING_BASE may only take affect after
> VHOST_MEV_SET_STATE?
Yeah, in this version, SET_VRING_BASE won't set the base to the
device directly. But I plan to not delay this anymore in the next
version to support the SET_STATUS.
> 
> 
> > +	default:
> > +		r = vhost_dev_ioctl(&m->dev, cmd, argp);
> > +		if (r == -ENOIOCTLCMD)
> > +			r = vhost_vring_ioctl(&m->dev, cmd, argp);
> > +	}
> > +
> > +	mutex_unlock(&m->mutex);
> > +	return r;
> > +}
> > +
> > +static const struct vfio_device_ops vfio_vhost_mdev_dev_ops = {
> > +	.name		= "vfio-vhost-mdev",
> > +	.open		= vhost_mdev_open,
> > +	.release	= vhost_mdev_release,
> > +	.ioctl		= vhost_mdev_unlocked_ioctl,
> > +};
> > +
> > +static int vhost_mdev_probe(struct device *dev)
> > +{
> > +	struct mdev_device *mdev = mdev_from_dev(dev);
> > +	const struct virtio_mdev_device_ops *ops = mdev_get_dev_ops(mdev);
> > +	struct vhost_mdev *m;
> > +	int nvqs, r;
> > +
> > +	m = kzalloc(sizeof(*m), GFP_KERNEL | __GFP_RETRY_MAYFAIL);
> > +	if (!m)
> > +		return -ENOMEM;
> > +
> > +	mutex_init(&m->mutex);
> > +
> > +	nvqs = ops->get_queue_max(mdev);
> > +	m->nvqs = nvqs;
> 
> 
> The name could be confusing, get_queue_max() is to get the maximum number
of
> entries for a virtqueue supported by this device.
OK. It might be better to rename it to something like:

	get_vq_num_max()

which is more consistent with the set_vq_num().
> 
> It looks to me that we need another API to query the maximum number of
> virtqueues supported by the device.
Yeah.

Thanks,
Tiwei

> 
> Thanks
> 
> 
> > +
> > +	m->vqs = kmalloc_array(nvqs, sizeof(struct vhost_virtqueue),
> > +			       GFP_KERNEL);
> > +	if (!m->vqs) {
> > +		r = -ENOMEM;
> > +		goto err;
> > +	}
> > +
> > +	r = vfio_add_group_dev(dev, &vfio_vhost_mdev_dev_ops, m);
> > +	if (r)
> > +		goto err;
> > +
> > +	m->features = ops->get_features(mdev);
> > +	m->mdev = mdev;
> > +	return 0;
> > +
> > +err:
> > +	kfree(m->vqs);
> > +	kfree(m);
> > +	return r;
> > +}
> > +
> > +static void vhost_mdev_remove(struct device *dev)
> > +{
> > +	struct vhost_mdev *m;
> > +
> > +	m = vfio_del_group_dev(dev);
> > +	mutex_destroy(&m->mutex);
> > +	kfree(m->vqs);
> > +	kfree(m);
> > +}
> > +
> > +static struct mdev_class_id id_table[] = {
> > +	{ MDEV_ID_VHOST },
> > +	{ 0 },
> > +};
> > +
> > +static struct mdev_driver vhost_mdev_driver = {
> > +	.name	= "vhost_mdev",
> > +	.probe	= vhost_mdev_probe,
> > +	.remove	= vhost_mdev_remove,
> > +	.id_table = id_table,
> > +};
> > +
> > +static int __init vhost_mdev_init(void)
> > +{
> > +	return mdev_register_driver(&vhost_mdev_driver, THIS_MODULE);
> > +}
> > +module_init(vhost_mdev_init);
> > +
> > +static void __exit vhost_mdev_exit(void)
> > +{
> > +	mdev_unregister_driver(&vhost_mdev_driver);
> > +}
> > +module_exit(vhost_mdev_exit);
> > +
> > +MODULE_VERSION("0.0.1");
> > +MODULE_LICENSE("GPL v2");
> > +MODULE_DESCRIPTION("Mediated device based accelerator for
virtio");
> > diff --git a/include/uapi/linux/vhost.h b/include/uapi/linux/vhost.h
> > index 40d028eed645..5afbc2f08fa3 100644
> > --- a/include/uapi/linux/vhost.h
> > +++ b/include/uapi/linux/vhost.h
> > @@ -116,4 +116,12 @@
> >   #define VHOST_VSOCK_SET_GUEST_CID	_IOW(VHOST_VIRTIO, 0x60, __u64)
> >   #define VHOST_VSOCK_SET_RUNNING		_IOW(VHOST_VIRTIO, 0x61, int)
> > +/* VHOST_MDEV specific defines */
> > +
> > +#define VHOST_MDEV_SET_STATE	_IOW(VHOST_VIRTIO, 0x70, __u64)
> > +
> > +#define VHOST_MDEV_S_STOPPED	0
> > +#define VHOST_MDEV_S_RUNNING	1
> > +#define VHOST_MDEV_S_MAX	2
> > +
> >   #endif

Seemingly Similar Threads

Search for more maybe matching threads

Linux Virtualization - Sep 2019 - [PATCH] vhost: introduce mdev based hardware backend

[PATCH] vhost: introduce mdev based hardware backend

[PATCH] vhost: introduce mdev based hardware backend

[PATCH] vhost: introduce mdev based hardware backend

[PATCH] vhost: introduce mdev based hardware backend

[PATCH] vhost: introduce mdev based hardware backend

[PATCH] vhost: introduce mdev based hardware backend

[PATCH] vhost: introduce mdev based hardware backend

Seemingly Similar Threads