thr3ads.net - Nouveau - [Nouveau] [PATCH v2 2/4] drm/vc4: Take underscan setup into account when updating planes [May 2018]

If this information is useful, please help other people find it:
Share via:

Boris Brezillon

2018-May-11 14:59 UTC

[Nouveau] [PATCH v2 0/4] drm/connector: Provide generic support for underscan

Hello,

This is an attempt at providing generic support for underscan connector
props. We already have 3 drivers defining the same underscan, underscan
vborder and underscan hborder properties (amd, radeon and nouveau) and
I am about to add a new one, hence my proposal to put the prop parsing
code in the core and add ->underscan fields to drm_connector_state.

In this v2, I also converted the nouveau driver to the generic
approach. The amdgpu and radeon ones can't be converted since they're
still not converted to the atomic interface.

Regards,

Boris 

Boris Brezillon (4):
  drm/connector: Add generic underscan properties
  drm/vc4: Take underscan setup into account when updating planes
  drm/vc4: Attach underscan props to the HDMI connector
  drm/nouveau: Switch to the generic underscan props

 drivers/gpu/drm/drm_atomic.c                |  12 +++
 drivers/gpu/drm/drm_connector.c             | 127 ++++++++++++++++++++++++++++
 drivers/gpu/drm/nouveau/nouveau_connector.c |  39 ++-------
 drivers/gpu/drm/nouveau/nouveau_connector.h |   9 --
 drivers/gpu/drm/nouveau/nouveau_display.c   |  14 ---
 drivers/gpu/drm/nouveau/nouveau_display.h   |   3 -
 drivers/gpu/drm/nouveau/nv50_display.c      |  17 ++--
 drivers/gpu/drm/vc4/vc4_hdmi.c              |  25 ++++++
 drivers/gpu/drm/vc4/vc4_plane.c             |  49 ++++++++++-
 include/drm/drm_connector.h                 |  80 ++++++++++++++++++
 10 files changed, 310 insertions(+), 65 deletions(-)

-- 
2.14.1

Boris Brezillon

2018-May-11 14:59 UTC

head link

[Nouveau] [PATCH v2 1/4] drm/connector: Add generic underscan properties

We have 3 drivers defining the "underscan", "underscan
hborder" and
"underscan vborder" properties (radeon, amd and nouveau) and we are
about to add the same kind of thing in VC4.

Define generic underscan props and add new fields to the drm_connector
state so that the property parsing logic can be shared by all DRM
drivers.

A driver can now attach underscan properties to its connector through
the drm_connector_attach_underscan_properties() helper, and can
check/apply the underscan setup based on the
drm_connector_state->underscan fields.

Signed-off-by: Boris Brezillon <boris.brezillon at bootlin.com>
---
Changes in v2:
- Add a new section in the connector props doc to describe underscan
  props
- Fix description of auto mode (auto means apply underscan for HDMI
  monitors only)
- Fix description of vborder/hborder:
    right_border = left_border = hborder
    top_border = bottom_border = vborder
  not
    right_border = left_border = hborder / 2
    top_border = bottom_border = vborder / 2
- Rename drm_underscan into drm_underscan_state
---
 drivers/gpu/drm/drm_atomic.c    |  12 ++++
 drivers/gpu/drm/drm_connector.c | 127 ++++++++++++++++++++++++++++++++++++++++
 include/drm/drm_connector.h     |  80 +++++++++++++++++++++++++
 3 files changed, 219 insertions(+)

diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index dc850b4b6e21..b7312bd172c9 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -1278,6 +1278,12 @@ static int drm_atomic_connector_set_property(struct
drm_connector *connector,
 			return -EINVAL;
 		}
 		state->content_protection = val;
+	} else if (property == connector->underscan_mode_property) {
+		state->underscan.mode = val;
+	} else if (property == connector->underscan_hborder_property) {
+		state->underscan.hborder = val;
+	} else if (property == connector->underscan_vborder_property) {
+		state->underscan.vborder = val;
 	} else if (connector->funcs->atomic_set_property) {
 		return connector->funcs->atomic_set_property(connector,
 				state, property, val);
@@ -1359,6 +1365,12 @@ drm_atomic_connector_get_property(struct drm_connector
*connector,
 		*val = state->scaling_mode;
 	} else if (property == connector->content_protection_property) {
 		*val = state->content_protection;
+	} else if (property == connector->underscan_mode_property) {
+		*val = state->underscan.mode;
+	} else if (property == connector->underscan_hborder_property) {
+		*val = state->underscan.hborder;
+	} else if (property == connector->underscan_vborder_property) {
+		*val = state->underscan.vborder;
 	} else if (connector->funcs->atomic_get_property) {
 		return connector->funcs->atomic_get_property(connector,
 				state, property, val);
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 9b9ba5d5ec0c..826af6267a4f 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -914,6 +914,38 @@ DRM_ENUM_NAME_FN(drm_get_content_protection_name,
drm_cp_enum_list)
  *	can also expose this property to external outputs, in which case they
  *	must support "None", which should be the default (since external
screens
  *	have a built-in scaler).
+ *
+ * Connectors for non-analog outputs may also have standardized underscan
+ * properties (drivers can set this up by calling
+ * drm_connector_attach_content_protection_property() on initialization):
+ *
+ * underscan:
+ *	This properties defines whether underscan is activated or not, and when
+ *	it is activated, how the horizontal and vertical borders are calculated:
+ *
+ *	off:
+ *		Underscan is disabled. The output image shouldn't be scaled to
+ *		take screen borders into account.
+ *	on:
+ *		Underscan is activated and horizontal and vertical borders are
+ *		specified through the "underscan hborder" and
+ *		"underscan vborder" properties.
+ *	auto:
+ *		Underscan is activated only for HDMI monitors.
+ *
+ * underscan hborder:
+ *	Horizontal border expressed in pixels. The border is symmetric, which
+ *	means you'll have a border of 'hborder' pixels on the left and
on the
+ *	same border on the right.
+ *	When this value is 0 and underscan is "on" or "auto",
the driver will
+ *	pick a default value (the default value is driver dependent).
+ *
+ * underscan vborder:
+ *	Vertical border expressed in pixels. The border is symmetric, which
+ *	means you'll have a border of 'vborder' pixels on the top and
the same
+ *	border on the bottom.
+ *	When this value is 0 and underscan is "on" or "auto",
the driver will
+ *	pick a default value (the default value is driver dependent).
  */
 
 int drm_connector_create_standard_properties(struct drm_device *dev)
@@ -1108,6 +1140,101 @@ int drm_mode_create_tv_properties(struct drm_device
*dev,
 }
 EXPORT_SYMBOL(drm_mode_create_tv_properties);
 
+static const struct drm_prop_enum_list drm_underscan_mode_enum_list[] = {
+	{ DRM_UNDERSCAN_OFF, "off" },
+	{ DRM_UNDERSCAN_ON, "on" },
+	{ DRM_UNDERSCAN_AUTO, "auto" },
+};
+
+/**
+ * drm_connector_attach_underscan_properties - attach atomic underscan
+ *					       properties
+ * @connector: connector to attach underscan mode properties on.
+ * @mode_mask: bitmask of %DRM_UNDERSCAN_XX modes encoding the supported
+ *	       underscan modes.
+ * @max_hborder: maximum size of the horizontal border expressed in pixels.
+ *		 Should be > 0.
+ * @max_vborder: maximum size of the vertical border expressed in pixels.
+ *		 Should be > 0.
+ *
+ * This is used to add support for underscan to atomic drivers.
+ * The underscan config will be set to &drm_connector_state.underscan
+ * and can be used from &drm_connector_helper_funcs->atomic_check for
+ * validation.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_attach_underscan_properties(struct drm_connector *connector,
+					      u32 mode_mask, u64 max_hborder,
+					      u64 max_vborder)
+{
+	unsigned int i, nmodes = ARRAY_SIZE(drm_underscan_mode_enum_list);
+	struct drm_device *dev = connector->dev;
+	struct drm_property *prop;
+
+	if (!max_hborder || !max_vborder)
+		return -EINVAL;
+
+	if (!hweight32(mode_mask) || (mode_mask & ~GENMASK(nmodes - 1, 0)))
+		return -EINVAL;
+
+	prop = drm_property_create(dev, DRM_MODE_PROP_ENUM, "underscan",
+				   hweight32(mode_mask));
+	if (!prop)
+		return -ENOMEM;
+
+	for (i = 0; i < ARRAY_SIZE(drm_underscan_mode_enum_list); i++) {
+		const struct drm_prop_enum_list *entry;
+		int ret;
+
+		if (!(BIT(i) & mode_mask))
+			continue;
+
+		entry = &drm_underscan_mode_enum_list[i];
+		ret = drm_property_add_enum(prop, entry->type, entry->name);
+		if (ret)
+			goto err_free_mode_prop;
+	}
+
+	connector->underscan_mode_property = prop;
+
+	prop = drm_property_create_range(dev, 0, "underscan hborder", 0,
+					 max_hborder);
+	if (!prop)
+		goto err_free_mode_prop;
+
+	connector->underscan_hborder_property = prop;
+
+	prop = drm_property_create_range(dev, 0, "underscan vborder", 0,
+					 max_vborder);
+	if (!prop)
+		goto err_free_hborder_prop;
+
+	connector->underscan_vborder_property = prop;
+
+	drm_object_attach_property(&connector->base,
+				   connector->underscan_mode_property,
+				   DRM_UNDERSCAN_OFF);
+	drm_object_attach_property(&connector->base,
+				   connector->underscan_hborder_property, 0);
+	drm_object_attach_property(&connector->base,
+				   connector->underscan_vborder_property, 0);
+
+	return 0;
+
+err_free_hborder_prop:
+	drm_property_destroy(dev, connector->underscan_hborder_property);
+	connector->underscan_hborder_property = NULL;
+
+err_free_mode_prop:
+	drm_property_destroy(dev, connector->underscan_mode_property);
+	connector->underscan_mode_property = NULL;
+
+	return -ENOMEM;
+}
+EXPORT_SYMBOL(drm_connector_attach_underscan_properties);
+
 /**
  * drm_mode_create_scaling_mode_property - create scaling mode property
  * @dev: DRM device
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 675cc3f8cf85..5ad968dc48c3 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -372,6 +372,53 @@ struct drm_tv_connector_state {
 	unsigned int hue;
 };
 
+/**
+ * enum drm_underscan_mode - Underscan mode
+ *
+ * This enum is used to track the underscan mode.
+ *
+ * @DRM_UNDERSCAN_OFF: No underscan applied, the output image will be unchanged
+ * @DRM_UNDERSCAN_ON: Underscan is enabled, and horizontal/vertical border size
+ *		      are specified through the &struct_drm_underscan->hborder
+ *		      and &struct_drm_underscan->vborder fields.
+ * @DRM_UNDERSCAN_AUTO: Underscan is enabled and
&struct_drm_underscan->hborder
+ *			and &struct_drm_underscan->vborder are guessed by the
+ *			driver.
+ */
+enum drm_underscan_mode {
+	DRM_UNDERSCAN_OFF,
+	DRM_UNDERSCAN_ON,
+	DRM_UNDERSCAN_AUTO,
+};
+
+/**
+ * struct drm_underscan_state - Underscan properties attached to a connector
+ *				state
+ *
+ * This can be used to tell the CRTC how the image should be scaled/placed in
+ * order to cover fit in the display connected through this connector. Most of
+ * the time used to address situations where the display borders are hidden.
+ * Can also be used to compensate overscan done on the display side.
+ */
+struct drm_underscan_state {
+	/**
+	 * @mode: Underscan mode.
+	 */
+	enum drm_underscan_mode mode;
+
+	/**
+	 * @hborder: Horizontal border. This values encodes both the left and
+	 * right borders: left_border = right_border = hborder / 2.
+	 */
+	unsigned int hborder;
+
+	/**
+	 * @vborder: Vertical border. This values encodes both the top and
+	 * bottom borders: top_border = bottom_border = vborder / 2.
+	 */
+	unsigned int vborder;
+};
+
 /**
  * struct drm_connector_state - mutable connector state
  * @connector: backpointer to the connector
@@ -429,6 +476,13 @@ struct drm_connector_state {
 	 * protection. This is most commonly used for HDCP.
 	 */
 	unsigned int content_protection;
+
+	/**
+	 * @underscan: Underscan information. Most commonly used to adjust
+	 * image when the display has borders covering part of the image of
+	 * when it's doing overscan on its own.
+	 */
+	struct drm_underscan_state underscan;
 };
 
 /**
@@ -892,6 +946,29 @@ struct drm_connector {
 	 */
 	struct drm_property_blob *tile_blob_ptr;
 
+	/**
+	 * @underscan_mode_property: Optional connector underscan mode. Used by
+	 * the driver to scale the output image and compensate an overscan done
+	 * on the display side.
+	 */
+	struct drm_property *underscan_mode_property;
+
+	/**
+	 * @underscan_hborder_property: Optional connector underscan horizontal
+	 * border (expressed in pixels). Used by the driver to adjust the
+	 * output image position and compensate an overscan done on the display
+	 * side.
+	 */
+	struct drm_property *underscan_hborder_property;
+
+	/**
+	 * @underscan_hborder_property: Optional connector underscan vertical
+	 * border (expressed in pixels). Used by the driver to adjust the
+	 * output image position and compensate an overscan done on the display
+	 * side.
+	 */
+	struct drm_property *underscan_vborder_property;
+
 /* should we poll this connector for connects and disconnects */
 /* hot plug detectable */
 #define DRM_CONNECTOR_POLL_HPD (1 << 0)
@@ -1088,6 +1165,9 @@ int drm_mode_create_dvi_i_properties(struct drm_device
*dev);
 int drm_mode_create_tv_properties(struct drm_device *dev,
 				  unsigned int num_modes,
 				  const char * const modes[]);
+int drm_connector_attach_underscan_properties(struct drm_connector *connector,
+					      u32 mode_mask, u64 max_hborder,
+					      u64 max_vborder);
 int drm_mode_create_scaling_mode_property(struct drm_device *dev);
 int drm_connector_attach_scaling_mode_property(struct drm_connector *connector,
 					       u32 scaling_mode_mask);
-- 
2.14.1

Boris Brezillon

2018-May-11 14:59 UTC

head link

[Nouveau] [PATCH v2 2/4] drm/vc4: Take underscan setup into account when updating planes

Applying an underscan setup is just a matter of scaling all planes
appropriately and adjusting the CRTC X/Y offset to account for the
horizontal and vertical border.

Create an vc4_plane_underscan_adj() function doing that and call it from
vc4_plane_setup_clipping_and_scaling() so that we are ready to attach
underscan properties to the HDMI connector.

Signed-off-by: Boris Brezillon <boris.brezillon at bootlin.com>
---
Changes in v2:
- Take changes on hborder/vborder meaning into account
---
 drivers/gpu/drm/vc4/vc4_plane.c | 49 ++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 48 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c
index 71d44c357d35..61ed60841cd6 100644
--- a/drivers/gpu/drm/vc4/vc4_plane.c
+++ b/drivers/gpu/drm/vc4/vc4_plane.c
@@ -258,6 +258,49 @@ static u32 vc4_get_scl_field(struct drm_plane_state *state,
int plane)
 	}
 }
 
+static int vc4_plane_underscan_adj(struct drm_plane_state *pstate)
+{
+	struct vc4_plane_state *vc4_pstate = to_vc4_plane_state(pstate);
+	struct drm_connector_state *conn_state = NULL;
+	struct drm_connector *conn;
+	struct drm_crtc_state *crtc_state;
+	int i;
+
+	for_each_new_connector_in_state(pstate->state, conn, conn_state, i) {
+		if (conn_state->crtc == pstate->crtc)
+			break;
+	}
+
+	if (i == pstate->state->num_connector)
+		return 0;
+
+	if (conn_state->underscan.mode != DRM_UNDERSCAN_ON)
+		return 0;
+
+	crtc_state = drm_atomic_get_new_crtc_state(pstate->state,
+						   pstate->crtc);
+
+	if (conn_state->underscan.hborder >= crtc_state->mode.hdisplay ||
+	    conn_state->underscan.vborder >= crtc_state->mode.vdisplay)
+		return -EINVAL;
+
+	vc4_pstate->crtc_x += conn_state->underscan.hborder;
+	vc4_pstate->crtc_y += conn_state->underscan.vborder;
+	vc4_pstate->crtc_w = (vc4_pstate->crtc_w *
+			      (crtc_state->mode.hdisplay -
+			       (conn_state->underscan.hborder * 2))) /
+			     crtc_state->mode.hdisplay;
+	vc4_pstate->crtc_h = (vc4_pstate->crtc_h *
+			      (crtc_state->mode.vdisplay -
+			       (conn_state->underscan.vborder * 2))) /
+			     crtc_state->mode.vdisplay;
+
+	if (!vc4_pstate->crtc_w || !vc4_pstate->crtc_h)
+		return -EINVAL;
+
+	return 0;
+}
+
 static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state)
 {
 	struct drm_plane *plane = state->plane;
@@ -269,7 +312,7 @@ static int vc4_plane_setup_clipping_and_scaling(struct
drm_plane_state *state)
 	int num_planes = fb->format->num_planes;
 	u32 h_subsample = 1;
 	u32 v_subsample = 1;
-	int i;
+	int i, ret;
 
 	for (i = 0; i < num_planes; i++)
 		vc4_state->offsets[i] = bo->paddr + fb->offsets[i];
@@ -292,6 +335,10 @@ static int vc4_plane_setup_clipping_and_scaling(struct
drm_plane_state *state)
 	vc4_state->crtc_w = state->crtc_w;
 	vc4_state->crtc_h = state->crtc_h;
 
+	ret = vc4_plane_underscan_adj(state);
+	if (ret)
+		return ret;
+
 	vc4_state->x_scaling[0] = vc4_get_scaling_mode(vc4_state->src_w[0],
 						       vc4_state->crtc_w);
 	vc4_state->y_scaling[0] = vc4_get_scaling_mode(vc4_state->src_h[0],
-- 
2.14.1

Boris Brezillon

2018-May-11 14:59 UTC

head link

[Nouveau] [PATCH v2 3/4] drm/vc4: Attach underscan props to the HDMI connector

Now that the plane code takes the underscan setup into account, we can
safely attach the underscan props to the HDMI connector.

We also take care of filling AVI infoframes correctly to expose the
top/botton/left/right bar.

Note that these underscan props match pretty well the
overscan_{left,right,top,bottom} properties defined in config.txt and
parsed by the VC4 firmware.

Signed-off-by: Boris Brezillon <boris.brezillon at bootlin.com>
---
Changes in v2:
- none
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 1a6db291d48b..17464b5981f9 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -323,6 +323,16 @@ static struct drm_connector *vc4_hdmi_connector_init(struct
drm_device *dev,
 			   DRM_MODE_CONNECTOR_HDMIA);
 	drm_connector_helper_add(connector, &vc4_hdmi_connector_helper_funcs);
 
+	/* The hborder and vborder limit is arbitrarily set to 1024 which
+	 * should be more than enough for real use cases. Note that the actual
+	 * limitation comes from the display mode:
+	 *	hborder < hdisplay && vborder < vdisplay
+	 */
+	drm_connector_attach_underscan_properties(connector,
+						  BIT(DRM_UNDERSCAN_OFF) |
+						  BIT(DRM_UNDERSCAN_ON),
+						  1024, 1024);
+
 	connector->polled = (DRM_CONNECTOR_POLL_CONNECT |
 			     DRM_CONNECTOR_POLL_DISCONNECT);
 
@@ -408,6 +418,9 @@ static void vc4_hdmi_write_infoframe(struct drm_encoder
*encoder,
 static void vc4_hdmi_set_avi_infoframe(struct drm_encoder *encoder)
 {
 	struct vc4_hdmi_encoder *vc4_encoder = to_vc4_hdmi_encoder(encoder);
+	struct vc4_dev *vc4 = encoder->dev->dev_private;
+	struct vc4_hdmi *hdmi = vc4->hdmi;
+	struct drm_connector_state *cstate = hdmi->connector->state;
 	struct drm_crtc *crtc = encoder->crtc;
 	const struct drm_display_mode *mode = &crtc->state->adjusted_mode;
 	union hdmi_infoframe frame;
@@ -426,6 +439,18 @@ static void vc4_hdmi_set_avi_infoframe(struct drm_encoder
*encoder)
 					   vc4_encoder->rgb_range_selectable,
 					   false);
 
+	if (cstate->underscan.mode == DRM_UNDERSCAN_ON) {
+		if (cstate->underscan.hborder) {
+			frame.avi.right_bar = cstate->underscan.hborder / 2;
+			frame.avi.left_bar = frame.avi.right_bar;
+		}
+
+		if (cstate->underscan.vborder) {
+			frame.avi.top_bar = cstate->underscan.vborder / 2;
+			frame.avi.bottom_bar = frame.avi.top_bar;
+		}
+	}
+
 	vc4_hdmi_write_infoframe(encoder, &frame);
 }
 
-- 
2.14.1

Boris Brezillon

2018-May-11 14:59 UTC

head link

[Nouveau] [PATCH v2 4/4] drm/nouveau: Switch to the generic underscan props

Now that underscan props can be parsed by the core and assigned to
conn_state->underscan.xxx, we can rely on this implementation and get
rid of the nouveau-specific underscan props.

Signed-off-by: Boris Brezillon <boris.brezillon at bootlin.com>
---
 drivers/gpu/drm/nouveau/nouveau_connector.c | 39 +++++------------------------
 drivers/gpu/drm/nouveau/nouveau_connector.h |  9 -------
 drivers/gpu/drm/nouveau/nouveau_display.c   | 14 -----------
 drivers/gpu/drm/nouveau/nouveau_display.h   |  3 ---
 drivers/gpu/drm/nouveau/nv50_display.c      | 17 +++++++++----
 5 files changed, 18 insertions(+), 64 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c
b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 6ed9cb053dfa..0ce055d3b89e 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -105,12 +105,6 @@ nouveau_conn_atomic_get_property(struct drm_connector
*connector,
 
 	if (property == dev->mode_config.scaling_mode_property)
 		*val = asyc->scaler.mode;
-	else if (property == disp->underscan_property)
-		*val = asyc->scaler.underscan.mode;
-	else if (property == disp->underscan_hborder_property)
-		*val = asyc->scaler.underscan.hborder;
-	else if (property == disp->underscan_vborder_property)
-		*val = asyc->scaler.underscan.vborder;
 	else if (property == disp->dithering_mode)
 		*val = asyc->dither.mode;
 	else if (property == disp->dithering_depth)
@@ -170,24 +164,6 @@ nouveau_conn_atomic_set_property(struct drm_connector
*connector,
 			asyc->set.scaler = true;
 		}
 	} else
-	if (property == disp->underscan_property) {
-		if (asyc->scaler.underscan.mode != val) {
-			asyc->scaler.underscan.mode = val;
-			asyc->set.scaler = true;
-		}
-	} else
-	if (property == disp->underscan_hborder_property) {
-		if (asyc->scaler.underscan.hborder != val) {
-			asyc->scaler.underscan.hborder = val;
-			asyc->set.scaler = true;
-		}
-	} else
-	if (property == disp->underscan_vborder_property) {
-		if (asyc->scaler.underscan.vborder != val) {
-			asyc->scaler.underscan.vborder = val;
-			asyc->set.scaler = true;
-		}
-	} else
 	if (property == disp->dithering_mode) {
 		if (asyc->dither.mode != val) {
 			asyc->dither.mode = val;
@@ -256,7 +232,6 @@ nouveau_conn_reset(struct drm_connector *connector)
 	asyc->dither.mode = DITHERING_MODE_AUTO;
 	asyc->dither.depth = DITHERING_DEPTH_AUTO;
 	asyc->scaler.mode = DRM_MODE_SCALE_NONE;
-	asyc->scaler.underscan.mode = UNDERSCAN_OFF;
 	asyc->procamp.color_vibrance = 150;
 	asyc->procamp.vibrant_hue = 90;
 
@@ -285,18 +260,16 @@ nouveau_conn_attach_properties(struct drm_connector
*connector)
 					   dvi_i_subconnector_property, 0);
 
 	/* Add overscan compensation options to digital outputs. */
-	if (disp->underscan_property &&
+	if (disp->disp.oclass >= NV50_DISP &&
 	    (connector->connector_type == DRM_MODE_CONNECTOR_DVID ||
 	     connector->connector_type == DRM_MODE_CONNECTOR_DVII ||
 	     connector->connector_type == DRM_MODE_CONNECTOR_HDMIA ||
 	     connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort)) {
-		drm_object_attach_property(&connector->base,
-					   disp->underscan_property,
-					   UNDERSCAN_OFF);
-		drm_object_attach_property(&connector->base,
-					   disp->underscan_hborder_property, 0);
-		drm_object_attach_property(&connector->base,
-					   disp->underscan_vborder_property, 0);
+		WARN_ON(drm_connector_attach_underscan_properties(connector,
+						BIT(DRM_UNDERSCAN_OFF) |
+						BIT(DRM_UNDERSCAN_ON) |
+						BIT(DRM_UNDERSCAN_AUTO),
+						128, 128));
 	}
 
 	/* Add hue and saturation options. */
diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.h
b/drivers/gpu/drm/nouveau/nouveau_connector.h
index a4d1a059bd3d..1d3ec65288e1 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.h
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.h
@@ -111,15 +111,6 @@ struct nouveau_conn_atom {
 
 	struct {
 		int mode;	/* DRM_MODE_SCALE_* */
-		struct {
-			enum {
-				UNDERSCAN_OFF,
-				UNDERSCAN_ON,
-				UNDERSCAN_AUTO,
-			} mode;
-			u32 hborder;
-			u32 vborder;
-		} underscan;
 		bool full;
 	} scaler;
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c
b/drivers/gpu/drm/nouveau/nouveau_display.c
index 7d0bec8dd03d..002c2b13571b 100644
--- a/drivers/gpu/drm/nouveau/nouveau_display.c
+++ b/drivers/gpu/drm/nouveau/nouveau_display.c
@@ -303,13 +303,6 @@ struct nouveau_drm_prop_enum_list {
 	char *name;
 };
 
-static struct nouveau_drm_prop_enum_list underscan[] = {
-	{ 6, UNDERSCAN_AUTO, "auto" },
-	{ 6, UNDERSCAN_OFF, "off" },
-	{ 6, UNDERSCAN_ON, "on" },
-	{}
-};
-
 static struct nouveau_drm_prop_enum_list dither_mode[] = {
 	{ 7, DITHERING_MODE_AUTO, "auto" },
 	{ 7, DITHERING_MODE_OFF, "off" },
@@ -464,13 +457,6 @@ nouveau_display_create_properties(struct drm_device *dev)
 
 	PROP_ENUM(disp->dithering_mode, gen, "dithering mode",
dither_mode);
 	PROP_ENUM(disp->dithering_depth, gen, "dithering depth",
dither_depth);
-	PROP_ENUM(disp->underscan_property, gen, "underscan", underscan);
-
-	disp->underscan_hborder_property -		drm_property_create_range(dev, 0,
"underscan hborder", 0, 128);
-
-	disp->underscan_vborder_property -		drm_property_create_range(dev, 0,
"underscan vborder", 0, 128);
 
 	if (gen < 1)
 		return;
diff --git a/drivers/gpu/drm/nouveau/nouveau_display.h
b/drivers/gpu/drm/nouveau/nouveau_display.h
index 270ba56f2756..df2f57d72fa9 100644
--- a/drivers/gpu/drm/nouveau/nouveau_display.h
+++ b/drivers/gpu/drm/nouveau/nouveau_display.h
@@ -42,9 +42,6 @@ struct nouveau_display {
 
 	struct drm_property *dithering_mode;
 	struct drm_property *dithering_depth;
-	struct drm_property *underscan_property;
-	struct drm_property *underscan_hborder_property;
-	struct drm_property *underscan_vborder_property;
 	/* not really hue and saturation: */
 	struct drm_property *vibrant_hue_property;
 	struct drm_property *color_vibrance_property;
diff --git a/drivers/gpu/drm/nouveau/nv50_display.c
b/drivers/gpu/drm/nouveau/nv50_display.c
index 8bd739cfd00d..7c7dbf3bd3a0 100644
--- a/drivers/gpu/drm/nouveau/nv50_display.c
+++ b/drivers/gpu/drm/nouveau/nv50_display.c
@@ -2057,11 +2057,11 @@ nv50_head_atomic_check_view(struct nv50_head_atom *armh,
 	 * ratio the same as the backend mode unless overridden by the
 	 * user setting both hborder and vborder properties.
 	 */
-	if ((asyc->scaler.underscan.mode == UNDERSCAN_ON ||
-	    (asyc->scaler.underscan.mode == UNDERSCAN_AUTO &&
+	if ((asyc->state.underscan.mode == DRM_UNDERSCAN_ON ||
+	    (asyc->state.underscan.mode == DRM_UNDERSCAN_AUTO &&
 	     drm_detect_hdmi_monitor(edid)))) {
-		u32 bX = asyc->scaler.underscan.hborder;
-		u32 bY = asyc->scaler.underscan.vborder;
+		u32 bX = asyc->state.underscan.hborder;
+		u32 bY = asyc->state.underscan.vborder;
 		u32 r = (asyh->view.oH << 19) / asyh->view.oW;
 
 		if (bX) {
@@ -2185,8 +2185,8 @@ nv50_head_atomic_check(struct drm_crtc *crtc, struct
drm_crtc_state *state)
 	struct nv50_head *head = nv50_head(crtc);
 	struct nv50_head_atom *armh = nv50_head_atom(crtc->state);
 	struct nv50_head_atom *asyh = nv50_head_atom(state);
+	struct drm_connector_state *conns, *oldconns;
 	struct nouveau_conn_atom *asyc = NULL;
-	struct drm_connector_state *conns;
 	struct drm_connector *conn;
 	int i;
 
@@ -2199,6 +2199,13 @@ nv50_head_atomic_check(struct drm_crtc *crtc, struct
drm_crtc_state *state)
 			}
 		}
 
+		for_each_oldnew_connector_in_state(asyh->state.state, conn,
+						   oldconns, conns, i) {
+			if (memcmp(&oldconns->underscan, &conns->underscan,
+				   sizeof(conns->underscan)))
+				asyc->set.scaler = true;
+		}
+
 		if (armh->state.active) {
 			if (asyc) {
 				if (asyh->state.mode_changed)
-- 
2.14.1

Ville Syrjälä

2018-May-11 15:34 UTC

head link

[Nouveau] [PATCH v2 2/4] drm/vc4: Take underscan setup into account when updating planes

On Fri, May 11, 2018 at 04:59:17PM +0200, Boris Brezillon
wrote:> Applying an underscan setup is just a matter of scaling all planes
> appropriately and adjusting the CRTC X/Y offset to account for the
> horizontal and vertical border.
> 
> Create an vc4_plane_underscan_adj() function doing that and call it from
> vc4_plane_setup_clipping_and_scaling() so that we are ready to attach
> underscan properties to the HDMI connector.
> 
> Signed-off-by: Boris Brezillon <boris.brezillon at bootlin.com>
> ---
> Changes in v2:
> - Take changes on hborder/vborder meaning into account
> ---
>  drivers/gpu/drm/vc4/vc4_plane.c | 49
++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 48 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/vc4/vc4_plane.c
b/drivers/gpu/drm/vc4/vc4_plane.c
> index 71d44c357d35..61ed60841cd6 100644
> --- a/drivers/gpu/drm/vc4/vc4_plane.c
> +++ b/drivers/gpu/drm/vc4/vc4_plane.c
> @@ -258,6 +258,49 @@ static u32 vc4_get_scl_field(struct drm_plane_state
*state, int plane)
>  	}
>  }
>  
> +static int vc4_plane_underscan_adj(struct drm_plane_state *pstate)
> +{
> +	struct vc4_plane_state *vc4_pstate = to_vc4_plane_state(pstate);
> +	struct drm_connector_state *conn_state = NULL;
> +	struct drm_connector *conn;
> +	struct drm_crtc_state *crtc_state;
> +	int i;
> +
> +	for_each_new_connector_in_state(pstate->state, conn, conn_state, i) {
> +		if (conn_state->crtc == pstate->crtc)
> +			break;
> +	}
> +
> +	if (i == pstate->state->num_connector)
> +		return 0;
> +
> +	if (conn_state->underscan.mode != DRM_UNDERSCAN_ON)
> +		return 0;
> +
> +	crtc_state = drm_atomic_get_new_crtc_state(pstate->state,
> +						   pstate->crtc);
> +
> +	if (conn_state->underscan.hborder >= crtc_state->mode.hdisplay
||
> +	    conn_state->underscan.vborder >= crtc_state->mode.vdisplay)
> +		return -EINVAL;
border * 2 ?
> +
> +	vc4_pstate->crtc_x += conn_state->underscan.hborder;
> +	vc4_pstate->crtc_y += conn_state->underscan.vborder;
> +	vc4_pstate->crtc_w = (vc4_pstate->crtc_w *
> +			      (crtc_state->mode.hdisplay -
> +			       (conn_state->underscan.hborder * 2))) /
> +			     crtc_state->mode.hdisplay;
> +	vc4_pstate->crtc_h = (vc4_pstate->crtc_h *
> +			      (crtc_state->mode.vdisplay -
> +			       (conn_state->underscan.vborder * 2))) /
> +			     crtc_state->mode.vdisplay;
So you're now scaling all planes? The code seems to reject scaling for
the cursor plane, how are you dealing with that? Or just no cursor
allowed when underscanning?

I'm also wondering if there's any way we can reconcile these border
props with the scaling mode prop, should we ever wish to expose
these props on connectors that already have the scaling mode prop.
Maybe we just have to require the scaling mode to be set to fullscreen 
to allow borders to be specified explictly?
> +
> +	if (!vc4_pstate->crtc_w || !vc4_pstate->crtc_h)
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +
>  static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state
*state)
>  {
>  	struct drm_plane *plane = state->plane;
> @@ -269,7 +312,7 @@ static int vc4_plane_setup_clipping_and_scaling(struct
drm_plane_state *state)
>  	int num_planes = fb->format->num_planes;
>  	u32 h_subsample = 1;
>  	u32 v_subsample = 1;
> -	int i;
> +	int i, ret;
>  
>  	for (i = 0; i < num_planes; i++)
>  		vc4_state->offsets[i] = bo->paddr + fb->offsets[i];
> @@ -292,6 +335,10 @@ static int vc4_plane_setup_clipping_and_scaling(struct
drm_plane_state *state)
>  	vc4_state->crtc_w = state->crtc_w;
>  	vc4_state->crtc_h = state->crtc_h;
>  
> +	ret = vc4_plane_underscan_adj(state);
> +	if (ret)
> +		return ret;
> +
>  	vc4_state->x_scaling[0] = vc4_get_scaling_mode(vc4_state->src_w[0],
>  						       vc4_state->crtc_w);
>  	vc4_state->y_scaling[0] = vc4_get_scaling_mode(vc4_state->src_h[0],
> -- 
> 2.14.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
-- 
Ville Syrjälä
Intel

Apparently Analagous Threads

Search for more reasonably related threads

Nouveau - May 2018 - [PATCH v2 2/4] drm/vc4: Take underscan setup into account when updating planes

[Nouveau] [PATCH v2 0/4] drm/connector: Provide generic support for underscan

[Nouveau] [PATCH v2 1/4] drm/connector: Add generic underscan properties

[Nouveau] [PATCH v2 2/4] drm/vc4: Take underscan setup into account when updating planes

[Nouveau] [PATCH v2 3/4] drm/vc4: Attach underscan props to the HDMI connector

[Nouveau] [PATCH v2 4/4] drm/nouveau: Switch to the generic underscan props

[Nouveau] [PATCH v2 2/4] drm/vc4: Take underscan setup into account when updating planes

Apparently Analagous Threads