Greetings !
My goal is to get Twilio trunking working, and with TLS/SRTP.
I see this concerning message in my log:
[Feb 7 16:50:26] ERROR[20596] res_sorcery_config.c: Could not create an object
of type 'endpoint' with id ?twilio' from configuration file
?pjsip.conf?
Thus, ?pjsip show endpoints? does not show the endpoint for the Twilio trunk.
Hoping for a sanity check of my pjsip.conf file, and what could be causing this.
A test call form Twilio?s system hits the PBX (over TLS), but always says ?No
matching endpoint found? in the asterisk log.
pjsip.conf
[transport-tls]
type = transport
protocol = tls
bind = 0.0.0.0:5061
cert_file=cert_file
priv_key_file=key_file
method=tlsv1
external_media_address=X.Y.Z.D
external_signaling_address=X.Y.Z.D
verify_client=no
verify_server=no
allow_reload=yes
[twilio](!)
type=endpoint
transport=transport-tls
context=from-twilio
disallow=all
allow=ulaw
dtmf_mode=inband
media_encryption=sdes
rtp_symmetric=yes
rewrite_contact=yes
force_rport=yes
canreinvite=no
tlsdontverifyserver=yes
[auth-out](!)
type=auth
auth_type=userpass
[twilio]
aors=twilio-aors
[twilio-aors]
type=aor
contact=sips:trunkname.pstn.twilio.com:5061 ;tried with sip: also
[twilio]
type=identify
endpoint=twilio
match=54.172.60.0
match=54.172.60.1
match=54.172.60.2
match=54.172.60.3
[endpoint-basic](!)
type=endpoint
transport=transport-tls
context=from-phones
disallow=all
allow=ulaw
[auth-userpass](!)
type=auth
auth_type=userpass
[aor-single-reg](!)
type=aor
max_contacts=20
[1001](endpoint-basic)
auth=auth1001
aors=1001
[auth1001](auth-userpass)
password=password123
username=1001
[1001](aor-single-reg)
Extensions.conf
[from-twilio]
exten => _+1NXXXXXXXXX,1,Dial(PJSIP/1001)
[from-phones]
exten => _NXXNXXXXXX,1,Set(CALLERID(all)="David" <78451234>)
same => n,Dial(PJSIP/+1${EXTEN}@twilio)
On Thu, Feb 8, 2018 at 12:53 AM, Kevin Long <kevin.long at haloprivacy.com> wrote:> > > Greetings ! > > > My goal is to get Twilio trunking working, and with TLS/SRTP. > > I see this concerning message in my log: > > [Feb 7 16:50:26] ERROR[20596] res_sorcery_config.c: Could not create an > object of type 'endpoint' with id ?twilio' from configuration file > ?pjsip.conf? > > > > Thus, ?pjsip show endpoints? does not show the endpoint for the Twilio > trunk. > > > Hoping for a sanity check of my pjsip.conf file, and what could be causing > this. > > A test call form Twilio?s system hits the PBX (over TLS), but always says > ?No matching endpoint found? in the asterisk log. > > > > pjsip.conf > > [transport-tls] > type = transport > protocol = tls > bind = 0.0.0.0:5061 > cert_file=cert_file > priv_key_file=key_file > method=tlsv1 > external_media_address=X.Y.Z.D > external_signaling_address=X.Y.Z.D > verify_client=no > verify_server=no > allow_reload=yes > > [twilio](!) > type=endpoint > transport=transport-tls > context=from-twilio > disallow=all > allow=ulaw > dtmf_mode=inband >Are you sure you want "inband" and not "rfc4733"?> media_encryption=sdes > rtp_symmetric=yes > rewrite_contact=yes > force_rport=yes > canreinvite=no > tlsdontverifyserver=yes >"canreinvite" and "tlsdontverifyserver" aren't valid endpoint parameters which is why the endpoint is failing to load.> > > [auth-out](!) > type=auth > auth_type=userpass > > [twilio] > aors=twilio-aors > > [twilio-aors] > type=aor > contact=sips:trunkname.pstn.twilio.com:5061 ;tried with sip: also > > [twilio] > type=identify > endpoint=twilio > match=54.172.60.0 > match=54.172.60.1 > match=54.172.60.2 > match=54.172.60.3 > > [endpoint-basic](!) > type=endpoint > transport=transport-tls > context=from-phones > disallow=all > allow=ulaw > > [auth-userpass](!) > type=auth > auth_type=userpass > > [aor-single-reg](!) > type=aor > max_contacts=20 > > [1001](endpoint-basic) > auth=auth1001 > aors=1001 > > [auth1001](auth-userpass) > password=password123 > username=1001 > > [1001](aor-single-reg) > > > Extensions.conf > > [from-twilio] > exten => _+1NXXXXXXXXX,1,Dial(PJSIP/1001) > > [from-phones] > exten => _NXXNXXXXXX,1,Set(CALLERID(all)="David" <78451234>) > same => n,Dial(PJSIP/+1${EXTEN}@twilio) > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Check out the new Asterisk community forum at: https://community.asterisk. > org/ > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users-- George Joseph Digium, Inc. | Software Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - US Check us out at: www.digium.com & www.asterisk.org -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20180208/bed42333/attachment.html>
@Kevin: Were such invalid endpoint parameters settings reported on Asterisk CLI ? My system reported: Could not find option suitable for category 'asterisk8' named 'foo' at line 15 of /etc/asterisk/pjsip.conf when I added ( at line 15 of /etc/asterisk/pjsip.conf): foo=bar 2018-02-08 14:48 GMT+01:00 George Joseph <gjoseph at digium.com>:> > > On Thu, Feb 8, 2018 at 12:53 AM, Kevin Long <kevin.long at haloprivacy.com> > wrote: > >> >> >> Greetings ! >> >> >> My goal is to get Twilio trunking working, and with TLS/SRTP. >> >> I see this concerning message in my log: >> >> [Feb 7 16:50:26] ERROR[20596] res_sorcery_config.c: Could not create an >> object of type 'endpoint' with id ?twilio' from configuration file >> ?pjsip.conf? >> >> >> >> Thus, ?pjsip show endpoints? does not show the endpoint for the Twilio >> trunk. >> >> >> Hoping for a sanity check of my pjsip.conf file, and what could be >> causing this. >> >> A test call form Twilio?s system hits the PBX (over TLS), but always says >> ?No matching endpoint found? in the asterisk log. >> >> >> >> pjsip.conf >> >> [transport-tls] >> type = transport >> protocol = tls >> bind = 0.0.0.0:5061 >> cert_file=cert_file >> priv_key_file=key_file >> method=tlsv1 >> external_media_address=X.Y.Z.D >> external_signaling_address=X.Y.Z.D >> verify_client=no >> verify_server=no >> allow_reload=yes >> >> [twilio](!) >> type=endpoint >> transport=transport-tls >> context=from-twilio >> disallow=all >> allow=ulaw >> dtmf_mode=inband >> > > Are you sure you want "inband" and not "rfc4733"? > > > >> media_encryption=sdes >> rtp_symmetric=yes >> rewrite_contact=yes >> force_rport=yes >> canreinvite=no >> tlsdontverifyserver=yes >> > > "canreinvite" and "tlsdontverifyserver" aren't valid endpoint parameters > which is why the endpoint is failing to load. > > >> >> >> [auth-out](!) >> type=auth >> auth_type=userpass >> >> [twilio] >> aors=twilio-aors >> >> [twilio-aors] >> type=aor >> contact=sips:trunkname.pstn.twilio.com:5061 ;tried with sip: also >> >> [twilio] >> type=identify >> endpoint=twilio >> match=54.172.60.0 >> match=54.172.60.1 >> match=54.172.60.2 >> match=54.172.60.3 >> >> [endpoint-basic](!) >> type=endpoint >> transport=transport-tls >> context=from-phones >> disallow=all >> allow=ulaw >> >> [auth-userpass](!) >> type=auth >> auth_type=userpass >> >> [aor-single-reg](!) >> type=aor >> max_contacts=20 >> >> [1001](endpoint-basic) >> auth=auth1001 >> aors=1001 >> >> [auth1001](auth-userpass) >> password=password123 >> username=1001 >> >> [1001](aor-single-reg) >> >> >> Extensions.conf >> >> [from-twilio] >> exten => _+1NXXXXXXXXX,1,Dial(PJSIP/1001) >> >> [from-phones] >> exten => _NXXNXXXXXX,1,Set(CALLERID(all)="David" <78451234>) >> same => n,Dial(PJSIP/+1${EXTEN}@twilio) >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> Check out the new Asterisk community forum at: >> https://community.asterisk.org/ >> >> New to Asterisk? Start here: >> https://wiki.asterisk.org/wiki/display/AST/Getting+Started >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > -- > George Joseph > Digium, Inc. | Software Developer > 445 Jan Davis Drive NW - Huntsville, AL 35806 - US > Check us out at: www.digium.com & www.asterisk.org > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Check out the new Asterisk community forum at: https://community.asterisk. > org/ > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20180208/22d2d5ff/attachment.html>
On Thu, Feb 8, 2018 at 1:53 AM, Kevin Long <kevin.long at haloprivacy.com> wrote:> > > Greetings ! > > > My goal is to get Twilio trunking working, and with TLS/SRTP. > > I see this concerning message in my log: > > [Feb 7 16:50:26] ERROR[20596] res_sorcery_config.c: Could not create an > object of type 'endpoint' with id ?twilio' from configuration file > ?pjsip.conf? > > > > Thus, ?pjsip show endpoints? does not show the endpoint for the Twilio > trunk. > > > Hoping for a sanity check of my pjsip.conf file, and what could be causing > this. > > A test call form Twilio?s system hits the PBX (over TLS), but always says > ?No matching endpoint found? in the asterisk log. > > > > pjsip.conf > > [transport-tls] > type = transport > protocol = tls > bind = 0.0.0.0:5061 > cert_file=cert_file > priv_key_file=key_file > method=tlsv1 > external_media_address=X.Y.Z.D > external_signaling_address=X.Y.Z.D > verify_client=no > verify_server=no > allow_reload=yes > > [twilio](!) > type=endpoint > transport=transport-tls > context=from-twilio > disallow=all > allow=ulaw > dtmf_mode=inband > media_encryption=sdes > rtp_symmetric=yes > rewrite_contact=yes > force_rport=yes > canreinvite=no >canreinvite has been replaced by directmedia in chan_sip's config file for at least a decade. It has never existed for chan_pjsip. For chan_pjsip it is direct_media.> tlsdontverifyserver=yes >> > [auth-out](!) > type=auth > auth_type=userpass > > [twilio] > aors=twilio-aors >This section looks like you are trying to actually create the twilo endpoint but you need to include the twilo template you defined earlier: [twilo](twilo). It would be better if you actually gave the twilo template a different name.> > [twilio-aors] > type=aor > contact=sips:trunkname.pstn.twilio.com:5061 ;tried with sip: also > > [twilio] > type=identify > endpoint=twilio > match=54.172.60.0 > match=54.172.60.1 > match=54.172.60.2 > match=54.172.60.3 > > [endpoint-basic](!) > type=endpoint > transport=transport-tls > context=from-phones > disallow=all > allow=ulaw > > [auth-userpass](!) > type=auth > auth_type=userpass > > [aor-single-reg](!) > type=aor > max_contacts=20 > > [1001](endpoint-basic) > auth=auth1001 > aors=1001 > > [auth1001](auth-userpass) > password=password123 > username=1001 > > [1001](aor-single-reg) > > > Extensions.conf > > [from-twilio] > exten => _+1NXXXXXXXXX,1,Dial(PJSIP/1001) > > [from-phones] > exten => _NXXNXXXXXX,1,Set(CALLERID(all)="David" <78451234>) > same => n,Dial(PJSIP/+1${EXTEN}@twilio) >You might want to look over config file common syntax [1] and template usage [2]. You might also want to look over pjsip configuration [3]. Richard [1] https://wiki.asterisk.org/wiki/display/AST/Asterisk+Configuration+Files [2] https://wiki.asterisk.org/wiki/display/AST/Templates [3] https://wiki.asterisk.org/wiki/display/AST/PJSIP+Configuration+Sections+and+Relationships -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20180208/42eecb43/attachment.html>