Michael Kruse via llvm-dev
2019-Jul-22 23:49 UTC
[llvm-dev] [RFC] A new multidimensional array indexing intrinsic
Intrinsics can return `llvm_any_ty` (Intrinsics.td). In that case the return type is added as a suffix to the intrinsic's name, i.e. the syntax in the RFC is not 100% the syntax for intrinsics. Same for the parameters which each must have their types explicitly mentioned. Michael Am Mo., 22. Juli 2019 um 19:08 Uhr schrieb Kaylor, Andrew <andrew.kaylor at intel.com>:> > Is it even possible to implement the original proposal using an intrinsic? I'm not sure how to interpret part of the description. It says the syntax for the intrinsic would be this: > > <result> = llvm.multidim.array.index.* <ty> <ty>* <ptrval> {<stride>, <idx>}* > > It isn't clear to me what that means. The later example is also in a somewhat generalized form: > > %arrayidx = llvm.multidim.array.index.* i64 i64* %A, %str_1, %idx_1, %str_2, %idx_2 > > Trying to expand this into something concrete it looks to me like the extra value-less type argument ('i64' immediately following the intrinsic name) won't work, and if I'm reading it correctly that's a necessary element. The GEP instruction accepts a raw type as a pseudo-argument. It does this to prepare for the coming transition to opaque pointers, and it can do it because it's a first class instruction. However, an intrinsic can't do this. And yet without it we won't know what to use for the GEP's source element type "argument" after pointer's lose their pointee type. > > -Andy > > -----Original Message----- > From: llvm-dev <llvm-dev-bounces at lists.llvm.org> On Behalf Of Doerfert, Johannes via llvm-dev > Sent: Monday, July 22, 2019 11:56 AM > To: Philip Reames <listmail at philipreames.com> > Cc: SAHIL GIRISH YERAWAR <cs15btech11044 at iith.ac.in>; llvm-dev <llvm-dev at lists.llvm.org>; Michael Ferguson <mferguson at cray.com>; Michael Kruse <llvm at meinersbur.de>; Tobias Grosser <tobias.grosser at inf.ethz.ch> > Subject: Re: [llvm-dev] [RFC] A new multidimensional array indexing intrinsic > > On 07/22, Philip Reames via llvm-dev wrote: > > We could also simply extend the existing inrange mechanism to > > non-constantexpr GEPs. It would remove an inconsistency in the > > semantics, be relatively straight forward, and solve the motivating example. > > Agreed. I'd very much prefer a GEP extension over an intrinsic solution. > > -- > Johannes > > > > > On 7/22/19 10:01 AM, Peter Collingbourne via llvm-dev wrote: > > > The restrictions of this new intrinsic seem very similar to those of > > > the inrange attribute on GEPs. It seems that the main advantage of > > > your proposal is that it would allow for non-constant strides (i.e. > > > variable length arrays) in dimensions other than the first one. Do > > > these appear frequently enough in the programs that you're > > > interested in to be worth optimizing for? > > > > > > Peter > > > > > > On Sun, Jul 21, 2019 at 3:54 PM Siddharth Bhat via llvm-dev > > > <llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org>> wrote: > > > > > > Hello, > > > > > > We would like to begin discussions around a new set of intrinsics, > > > to better express > > > multi-dimensional array indexing within LLVM. The motivations and > > > a possible design > > > are sketched out below. > > > > > > Rendered RFC link here > > > > > > <https://github.com/bollu/llvm-multidim-array-indexing-proposal/blob > > > /master/RFC.md> > > > > > > > > > Raw markdown: > > > > > > # Introducing a new multidimensional array indexing intrinsic > > > > > > ## The request for change: A new intrinsic, `llvm.multidim.array.index.*`. > > > > > > We propose the addition of a new family of intrinsics, `llvm.multidim.array.index.*`. > > > This will allow us to represent array indexing into an array `A[d1][d2][..][dk]` > > > as `llvm.multidim.array.index.k A d1, d2, d3, ... dk` instead of flattening > > > the information into `gep A, d1 * n1 + d2 * n2 + ... + dk * nk`. The former > > > unflattened representation is advantageous for analysis and optimisation. It also > > > allows us to represent array indexing semantics of languages such as Fortran > > > and Chapel, which differs from that of C based array indexing. > > > > > > ## Motivating the need for a multi-dimensional array indexing > > > intrinsic > > > > > > There are primarily one of two views of array indexing involving > > > multiple dimensions most languages take, which we discuss to motivate > > > the need for a multi-dimensional array index. This consideration impacts > > > the kinds of analysis we can perform on the program. In Polly, we care about > > > dependence analysis, so the examples here will focus on that particular problem. > > > > > > Let us consider an array indexing operation of the form: > > > ```cpp > > > int ex1(int n, int m, B[n][m], int x1, int x2, int y1, int y2) { > > > __builtin_assume(x1 != x2); > > > __builtin_assume(y1 != y2); > > > B[x1][y1] = 1; > > > printf("%d", B[x2][y2]); > > > exit(0); > > > } > > > ``` > > > > > > One would like to infer that the array indices _interpreted as tuples_ > > > `(x1, y1)` and `(x2, y2)` do not have the same value, due to the guarding asserts > > > that `x1 != x2` and `y1 != y2`. As a result, the write `B[x1][y1] = 1` can > > > in no way interfere with the value of `B[x2][y2]`. Consquently, > > > we can optimise the program into: > > > > > > > > > ```cpp > > > int ex1_opt(int n, int m, B[n][m], int x1, int x2, int y1, int y2) { > > > // B[x1][y1] = 1 is omitted because the result > > > // cannot be used: > > > // It is not used in the print and then the program exits > > > printf("%d", B[x2][y2]); > > > exit(0); > > > } > > > ``` > > > > > > However, alas, this is illegal, for the C language does not provide > > > semantics that allow the final inference above. It is conceivable that > > > `x1 != x2, y1 != y2`, but the indices do actually alias, since > > > according to C semantics, the two indices alias if the _flattened > > > representation of the indices alias_. Consider the parameter > > > values: > > > > > > ``` > > > n = m = 3 > > > x1 = 1, y1 = 0; B[x1][y1] = nx1+y1 = 3*1+0=3 > > > x2 = 0, y2 = 3; B[x2][y2] = nx2+y2 = 3*0+3=3 > > > ``` > > > > > > Hence, the array elements `B[x1][y1]` and `B[x2][y2]` _can alias_, and > > > so the transformation proposed in `ex1_opt` is unsound in general. > > > > > > > > > In contrast, many langagues other than C require that index > > > expressions for multidimensional arrays have each component within the > > > array dimension for that component. As a result, in the example above, > > > the index pair `(0,3)` would be out-of-bounds. In languages with these > > > semantics, one can infer that the indexing: > > > > > > `[x1][y1] != [x2][y2]` iff `x1 != x2 || y1 != y2`. > > > > > > While this particular example is not very interesting, it shows the > > > spirit of the lack of expressiveness in LLVM we are trying to > > > improve. > > > > > > Julia, Fortran, and Chapel are examples of such languages which target > > > LLVM. > > > > > > Currently, the LLVM semantics of `getelementptr` talk purely of > > > the C style flattened views of arrays. This inhibits the ability of the optimiser > > > to understand the multidimensional examples as given above, and we > > > are forced to make conservative assumptions, inhibiting optimisation. > > > This information must ideally be expressible in LLVM, such that LLVM's optimisers and > > > alias analysis can use this information to model multidimensional-array > > > semantics. > > > > > > There is a more realistic (and involved) example in [Appendix A](#Appendix-A) > > > in the same spirit as the above simple example, but one a compiler might > > > realistically wish to perform. > > > > > > ## Evaluation of the impact of the intrinsic on accuracy of > > > dependence analysis > > > > > > - This has been implemented in an exprimental branch of Polly, and was used > > > on the COSMO climate weather model. This greatly helped increase the accuracy > > > of Polly's analysis, since we eliminated the guessing game from the array analysis. > > > > > > - This has also been implemented as part of a GSoC effort to unify > > > Chapel and Polly. > > > > > > - Molly, the distributed version of Polly written by Michael Kruse for his PhD > > > also implemented a similar scheme. In his use-case, optimistic run-time checks > > > with delinearization was not possible, so this kind of intrinsic was _necessary_ > > > for the application, not just _good to have_. More details are available > > > in his PhD thesis: [Lattice QCD Optimization and Polytopic Representations of Distributed Memory](https://tel.archives-ouvertes.fr/tel-01078440). > > > In particular, Chapter 9 contains a detailed discussion. > > > > > > # Representations > > > > > > ## Intrinsic > > > > > > ### Syntax > > > ``` > > > <result> = llvm.multidim.array.index.* <ty> <ty>* <ptrval> {<stride>, <idx>}* > > > ``` > > > > > > ### Overview: > > > > > > The `llvm.multidim.array.index.*` intrinsic is used to get the address of > > > an element from an array. It performs address calcuation only and > > > does not access memory. It is similar to `getelementptr`. However, it imposes > > > additional semantics which allows the optimiser to provide better optimisations > > > than `getlementptr`. > > > > > > > > > > > > ### Arguments: > > > > > > The first argument is always a type used as the basis for the calculations. The > > > second argument is always a pointer, and is the base address to start the > > > calculation from. The remaining arguments are a list of pairs. Each pair > > > contains a dimension stride, and an offset with respect to that stride. > > > > > > > > > ### Semantics: > > > > > > `llvm.multidim.array.index.*` represents a multi-dimensional array index, In particular, this will > > > mean that we will assume that all indices `<idx_i>` are non-negative. > > > > > > Additionally, we assume that, for each `<str_i>`, `<idx_i>` pair, that > > > `0 <= idx_i < str_i`. > > > > > > Optimizations can assume that, given two llvm.multidim.array.index.* instructions with matching types: > > > > > > ``` > > > llvm.multidim.array.index.* <ty> <ty>* <ptrvalA> <strA_1>, <idxA_1>, ..., <strA_N>, <idxA_N> > > > llvm.multidim.array.index.* <ty> <ty>* <ptrvalB> <strB_1>, <idxB_1>, ..., <strB_N>, <idxb_N> > > > ``` > > > > > > If `ptrvalA == ptrvalB` and the strides are equal `(strA_1 == strB_1 && ... && strA_N == strB_N)` then: > > > > > > - If all the indices are equal (that is, `idxA_1 == idxB_1 && ... && idxA_N == idxB_N`), > > > then the resulting pointer values are equal. > > > > > > - If any index value is not equal (that is, there exists an `i` such that `idxA_i != idxB_i`), > > > then the resulting pointer values are not equal. > > > > > > > > > ##### Address computation: > > > Consider an invocation of `llvm.multidim.array.index.*`: > > > > > > ``` > > > <result> = call @llvm.multidim.array.index.* <ty> <ty>* <ptrval> <str_0>, <idx_0>, <str_1> <idx_1>, ..., <str_n> <idx_n> > > > ``` > > > > > > If the pairs are denoted by `(str_i, idx_i)`, where `str_i` denotes the stride > > > and `idx_i` denotes the index of the ith pair, then the final address (in bytes) > > > is computed as: > > > > > > ``` > > > ptrval + len(ty) * [(str_0 * idx_0) + (str_1 * idx_1) + ... (str_n * idx_n)] > > > ``` > > > > > > ## Transitioning to `llvm.multidim.array.index.*`: Allow `multidim_array_index` to refer to a GEP instruction: > > > > > > This is a sketch of how we might gradually introduce the `llvm.multidim.array.index.*` > > > intrinsic into LLVM without immediately losing the analyses > > > that are performed on `getelememtptr` instructions. This section > > > lists out some possible choices that we have, since the authors > > > do not have a "best" solution. > > > > > > ##### Choice 1: Write a `llvm.multidim.array.index.*` to `GEP` > > > pass, with the `GEP` annotated with metadata > > > > > > This pass will flatten all `llvm.multidim.array.index.*` expressions into a `GEP` annotated with metadata. This metadata will indicate that the index expression computed by the lowered GEP is guaranteed to be in a canonical form which allows the analysis > > > to infer stride and index sizes. > > > > > > A multidim index of the form: > > > ``` > > > %arrayidx = llvm.multidim.array.index.* i64 i64* %A, %str_1, %idx_1, %str_2, %idx_2 > > > ``` > > > > > > is lowered to: > > > > > > ``` > > > %mul1 = mul nsw i64 %str_1, %idx_1 > > > %mul2 = mul1 nsw i64 %str_2, %idx_2 > > > %total = add nsw i64 %mul2, %mul1 > > > %arrayidx = getelementptr inbounds i64, i64* %A, i64 %total, !multidim !1 > > > ``` > > > with guarantees that the first term in each multiplication is the stride > > > and the second term in each multiplication is the index. (What happens > > > if intermediate transformation passes decide to change the order? This seems > > > complicated). > > > > > > **TODO:** Lookup how to attach metadata such that the metadata can communicate > > > which of the values are strides and which are indeces > > > > > > > > > > > > # Caveats > > > > > > Currently, we assume that the array shape is immutable. However, we will need to deal with > > > being able to express `reshape` like primitives where the array shape can be mutated. However, > > > this appears to make expressing this information quite difficult: We now need to attach the shape > > > information to an array per "shape-live-range". > > > > > > > > > ## Appendix-A > > > > > > ##### A realistic, more involved example of dependence analysis > > > going wrong > > > > > > ```cpp > > > // In an array A of size (n0 x n1), > > > // fill a subarray of size (s0 x s1) > > > // which starts at an offset (o0 x o1) in the larger array A > > > void set_subarray(unsigned n0, unsigned n1, > > > unsigned o0, unsigned o1, > > > unsigned s0, unsigned s1, > > > float A[n0][n1]) { > > > for (unsigned i = 0; i < s0; i++) > > > for (unsigned j = 0; j < s1; j++) > > > S: A[i + o0][j + o1] = 1; > > > } > > > ``` > > > We first reduce this index expression to a sum of products: > > > > > > ``` > > > (i + o0) * n1 + (j + o1) = n1i + n1o0 + j + o1 > > > ix(i, j, n0, n1, o0, o1) = n1i + n1o0 + j + o1 > > > ``` > > > > > > `ix` is the index expression which `LLVM` will see, since it is fully > > > flattened, in comparison with the multi-dimensional index expression > > > `index:[i + o0][j + o1] | sizes:[][n1]`. > > > > > > We will now show _why_ this multi-dimensional index is not always correct, > > > and why guessing for one language will not work for another: > > > > > > Consider a call `set_subarray(n0=8, n1=9, o0=4, o1=6, s0=3, s1=6)`. At face > > > value, this is incorrect if we view the array as 2D grid, since the size > > > of the array is `(n0, n1) = (8, 9)`, but we are writing an array of size > > > `(s0, s1) = (3, 6)` starting from `(o0, o1) = (4, 6)`. Clearly, we will > > > exceed the width of the array, since `(s1 + o1 = 6 + 6 = 12) > (n1 = 9)`. > > > However, now think of the array as a flattened 1D representation. In this > > > case, the total size of the array is `n1xn2 = 8x9 = 72`, while the largest > > > element we will access is at the largest value of `(i, j)`. That is, > > > `i = s0 - 1 = 2`, and `j = s1 - 1 = 5`. > > > > > > The largest index will be `ix(i=2, j=5, n0=8, n1=9, o0=4, o1=6) = 8*2+8*4+5+6=59`. > > > Since `59 < 72`, we are clearly at _legal_ array indices, by C semantics! > > > > > > The definition of the semantics of the language **changed the illegal > > > multidimensional access** (which is illegal since it exceeds the `n1` > > > dimension), into a **legal flattened 1D access** (which is legal since the > > > flattened array indices are inbounds). > > > > > > LLVM has no way of expressing these two different semantics. Hence, we are > > > forced to: > > > 1. Consider flattened 1D accesses, which makes analysis of index expressions > > > equivalent to analysis of polynomials over the integers, which is hard. > > > 2. Guess multidimensional representations, and use them at the expense of > > > soundness bugs as shown above. > > > 3. Guess multidimensional representations, use them, and check their validity > > > at runtime, causing a runtime performance hit. This implementation follows > > > the description from the paper [Optimistic Delinearization of Parametrically Sized Arrays](optim-delin-parametrically-sized-arrays). > > > > > > > > > Currently, Polly opts for option (3), which is to emit runtime checks. If > > > the run-time checks fail, then Polly will not run its optimised code. Instead, > > > It keeps a copy of the unoptimised code around, which is run in this case. > > > Note that this effectively doubles the amount of performance-sensitive code > > > which is finally emitted after running Polly. > > > > > > Ideally, we would like a mechanism to directly express the multidimensional > > > semantics, which would eliminate this kind of guesswork from Polly/LLVM, > > > which would both make code faster, and easier to analyze. > > > > > > ## References > > > - [The chapel language specification](https://chapel-lang.org/docs/1.13/_downloads/chapelLanguageSpec.pdf) > > > - [Fortran 2003 standard](http://www.j3-fortran.org/doc/year/04/04-007.pdf}{Fortran <http://www.j3-fortran.org/doc/year/04/04-007.pdf%7D%7BFortran> 2003 standard) > > > - [C++ subscripting](http://eel.is/c++draft/expr.sub) > > > - [Michael Kruse's PhD thesis: Lattice QCD Optimization and Polytopic Representations of Distributed Memory](https://tel.archives-ouvertes.fr/tel-01078440). > > > - [Molly source code link for the intrinsic](https://github.com/Meinersbur/llvm/blob/molly/include/llvm/IR/IntrinsicsMolly.td#L3) > > > -[Optimistic Delinearization of Parametrically Sized > > > Arrays](optim-delin-parametrically-sized-arrays) > > > > > > > > > [optim-delin-parametrically-sized-arrays]:http://delivery.acm.org/10 > > > .1145/2760000/2751248/p351-grosser.pdf?ip=93.3.109.183&id=2751248&ac > > > c=CHORUS&key=4D4702B0C3E38B35%2E4D4702B0C3E38B35%2E4D4702B0C3E38B35% > > > 2E6D218144511F3437&__acm__=1557948443_2f56675c6d04796f27b84593535c9f > > > 70 > > > > > > > > > _______________________________________________ > > > LLVM Developers mailing list > > > llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org> > > > https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev > > > > > > > > > > > > -- > > > -- > > > Peter > > > > > > _______________________________________________ > > > LLVM Developers mailing list > > > llvm-dev at lists.llvm.org > > > https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev > > > _______________________________________________ > > LLVM Developers mailing list > > llvm-dev at lists.llvm.org > > https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev > > > -- > > Johannes Doerfert > Researcher > > Argonne National Laboratory > Lemont, IL 60439, USA > > jdoerfert at anl.gov
Michael Kruse via llvm-dev
2019-Jul-23 01:14 UTC
[llvm-dev] [RFC] A new multidimensional array indexing intrinsic
Hi, I think I understand what the problem is. The return type will also be an untyped pointer, just like GEP. However, GEP needs to know what the size of one element is. Like it is now with overloadable intrinsics, we might derive it from the suffix. Another solution is that we pass the element and array sizes in bytes, instead of multiples of the element size. As a third options, we might change and auto-upgrade the intrinsic to a proper instruction when the change comes. Michael Am Mo., 22. Juli 2019 um 20:14 Uhr schrieb Kaylor, Andrew via llvm-dev <llvm-dev at lists.llvm.org>:> > I don't think the return type has anything to do with what I was asking about. Perhaps seeing a concrete, fully-legal IR representation of what's being proposed would help. > > Here's a best guess, switching the indexed base type to a non-integer for illustration purposes: > > %arrayidx = call i64 @llvm.multidim.array.index.i64.p0f64.i64.i64.i64.i64 double* %A, i64 %str_1, i64 %idx_1, i64 %str_2, i64 %idx_2 > > According to the RFC, that would get lowered to this: > > %mul1 = mul nsw i64 %str_1, %idx_1 > %mul2 = mul1 nsw i64 %str_2, %idx_2 > %total = add nsw i64 %mul2, %mul1 > %arrayidx = getelementptr inbounds double, double* %A, i64 %total, !multidim !1 > > The problem I'm having is that the source element type in the GEP instruction in the lowering can only be inferred from the pointer type, which is going away at some point. When pointers become typeless, the call will look something like this: > > %arrayidx = call i64 @llvm.multidim.array.index.i64.p0.i64.i64.i64.i64 void* %A, i64 %str_1, i64 %idx_1, i64 %str_2, i64 %idx_2 > > Do you see what I'm saying? Have I misunderstood something?
Possibly Parallel Threads
- [RFC] A new multidimensional array indexing intrinsic
- [RFC] A new multidimensional array indexing intrinsic
- [RFC] A new multidimensional array indexing intrinsic
- [RFC] A new multidimensional array indexing intrinsic
- [RFC] A new multidimensional array indexing intrinsic