After the removal of llvm/test/Programs and insertion of llvm-test cvs
module, the nightly tester showed the following:
x86 Linux debug:
* hard to say. I think it failed because the check in occurred just
as it was starting up. Could someone verify for me? No results
were produced.
x86 Linux optimized:
* everything ran okay
* loc graph now shows 550k lines (up 350k!) - not sure what that's
all about. I'll look at the loc counting code. It should have gone
DOWN.
x86 FreeBSD:
* hasn't run with changes yet
PPC Darwin:
* hasn't run with changes yet
SPARC V9 Solaris:
* hasn't run with changes yet.
We'll have to wait a few more hours for the last 3 platforms. It looks
like things mostly build okay. If you update and try testing, please let
me know how it goes. I'd like to hear about successes too as I'm pretty
worried that its just flat out broken on non-Linux platforms.
Reid
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
URL:
<http://lists.llvm.org/pipermail/llvm-dev/attachments/20040905/5ef044f1/attachment.sig>
Configure gives me these errors on FreeBSD. I'm proceding with the build anyway to see what happens. Don't worry :) It'll only take about 2.5 hours instead of 30+ now. install: ../test/Programs/Makefile does not exist config.status: executing test/Programs/Makefile.programs commands install: ../test/Programs/Makefile.programs does not exist config.status: executing test/Programs/Makefile.tests commands install: ../test/Programs/Makefile.tests does not exist config.status: executing test/Programs/TEST.aa.Makefile commands install: ../test/Programs/TEST.aa.Makefile does not exist config.status: executing test/Programs/TEST.dsgraph.report commands install: ../test/Programs/TEST.dsgraph.report does not exist config.status: executing test/Programs/TEST.aa.report commands install: ../test/Programs/TEST.aa.report does not exist config.status: executing test/Programs/TEST.example.Makefile commands install: ../test/Programs/TEST.example.Makefile does not exist config.status: executing test/Programs/TEST.nightly.Makefile commands install: ../test/Programs/TEST.nightly.Makefile does not exist config.status: executing test/Programs/TEST.buildrepo.Makefile commands install: ../test/Programs/TEST.buildrepo.Makefile does not exist config.status: executing test/Programs/TEST.jit.Makefile commands install: ../test/Programs/TEST.jit.Makefile does not exist config.status: executing test/Programs/TEST.nightly.report commands install: ../test/Programs/TEST.nightly.report does not exist config.status: executing test/Programs/TEST.dsgraph.Makefile commands install: ../test/Programs/TEST.dsgraph.Makefile does not exist config.status: executing test/Programs/TEST.jit.report commands install: ../test/Programs/TEST.jit.report does not exist config.status: executing test/Programs/TEST.typesafe.Makefile commands install: ../test/Programs/TEST.typesafe.Makefile does not exist config.status: executing test/Programs/TEST.dsgraph.gnuplot commands install: ../test/Programs/TEST.dsgraph.gnuplot does not exist config.status: executing test/Programs/TEST.vtl.Makefile commands install: ../test/Programs/TEST.vtl.Makefile does not exist cd: can't cd to ../../../../test/Programs/External config.status: executing test/Programs/External/Makefile commands install: ../test/Programs/External/Makefile does not exist cd: can't cd to ../../../../../test/Programs/External/SPEC config.status: executing test/Programs/External/SPEC/Makefile commands install: ../test/Programs/External/SPEC/Makefile does not exist cd: can't cd to ../../../../../test/Programs/External/SPEC config.status: executing test/Programs/External/SPEC/Makefile.spec commands install: ../test/Programs/External/SPEC/Makefile.spec does not exist cd: can't cd to ../../../../../test/Programs/External/SPEC config.status: executing test/Programs/External/SPEC/Makefile.spec2000 commands install: ../test/Programs/External/SPEC/Makefile.spec2000 does not exist cd: can't cd to ../../../../../test/Programs/External/SPEC config.status: executing test/Programs/External/SPEC/Makefile.spec95 commands install: ../test/Programs/External/SPEC/Makefile.spec95 does not exist config.status: executing test/Programs/MultiSource/Makefile commands install: ../test/Programs/MultiSource/Makefile does not exist config.status: executing test/Programs/MultiSource/Makefile.multisrc commands install: ../test/Programs/MultiSource/Makefile.multisrc does not exist cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/analyzer config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/analyzer/test.in commands install: ../test/Programs/MultiSource/Benchmarks/FreeBench/analyzer/test.in does not exist cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/distray config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/distray/Makefile commands install: ../test/Programs/MultiSource/Benchmarks/FreeBench/distray/Makefile does not exist cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/distray config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/distray/test.in commands install: ../test/Programs/MultiSource/Benchmarks/FreeBench/distray/test.in does not exist cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/Makefile commands install: ../test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/Makefile does not exist cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/test.in commands install: ../test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/test.in does not exist cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/mason config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/mason/Makefile commands install: ../test/Programs/MultiSource/Benchmarks/FreeBench/mason/Makefile does not exist cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/mason config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/mason/test.in commands install: ../test/Programs/MultiSource/Benchmarks/FreeBench/mason/test.in does not exist cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/neural config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/neural/Makefile commands install: ../test/Programs/MultiSource/Benchmarks/FreeBench/neural/Makefile does not exist cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/neural config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/neural/test.in commands install: ../test/Programs/MultiSource/Benchmarks/FreeBench/neural/test.in does not exist cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2 config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/Makefile commands install: ../test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/Makefile does not exist cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2 config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/test.in commands install: ../test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/test.in does not exist cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/pifft config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/pifft/Makefile commands On Sun, 05 Sep 2004 09:31:49 -0700 Reid Spencer <reid at x10sys.com> wrote:> After the removal of llvm/test/Programs and insertion of llvm-test cvs > module, the nightly tester showed the following: > > x86 Linux debug: > * hard to say. I think it failed because the check in occurred just > as it was starting up. Could someone verify for me? No results > were produced. > > x86 Linux optimized: > * everything ran okay > * loc graph now shows 550k lines (up 350k!) - not sure what that's > all about. I'll look at the loc counting code. It should have gone > DOWN. > > x86 FreeBSD: > * hasn't run with changes yet > > PPC Darwin: > * hasn't run with changes yet > > SPARC V9 Solaris: > * hasn't run with changes yet. > > We'll have to wait a few more hours for the last 3 platforms. It looks > like things mostly build okay. If you update and try testing, please let > me know how it goes. I'd like to hear about successes too as I'm pretty > worried that its just flat out broken on non-Linux platforms. > > Reid >
> x86 FreeBSD: > * hasn't run with changes yetI manually start script. I use this options (+ -verbose now for testing) /home/wanderer/pkg/build/llvm/src/llvm/utils/NightlyTest.pl -parallel -enable-linscan -noexternals -noremove :pserver:anon at llvm-cvs.cs.uiuc.edu:2401/var/cvs/llvm /home/wanderer/pkg/build/llvm/night/build /home/wanderer/pkg/build/llvm/night/testresults-X86-FreeBSD Log: INITIALIZED CVS Root = :pserver:anon at llvm-cvs.cs.uiuc.edu:2401/var/cvs/llvm-test BuildDir = /home/wanderer/pkg/build/llvm/night/build WebDir = /home/wanderer/pkg/build/llvm/night/testresults-X86-FreeBSD Prefix = /home/wanderer/pkg/build/llvm/night/testresults-X86-FreeBSD/2004-09-05 CVSLog = /home/wanderer/pkg/build/llvm/night/testresults-X86-FreeBSD/2004-09-05-CVS-Log.txt BuildLog = /home/wanderer/pkg/build/llvm/night/testresults-X86-FreeBSD/2004-09-05-Build-Log.txt Changing To: CVS checkout directory (/home/wanderer/pkg/build/llvm/night/build) CHECKOUT STAGE Syntax error: "(" unexpected (expecting ")") Changing To: CVS Checkout directory (/home/wanderer/pkg/build/llvm/night/build) Changing To: llvm source directory (llvm) Cannot change directory to: llvm source directory (llvm) at /home/wanderer/pkg/build/llvm/src/llvm/utils/NightlyTest.pl line 133. Vladimir
You really need to do a cvs update, especially on the configure script. Reid. On Sun, 2004-09-05 at 09:53, Jeff Cohen wrote:> Configure gives me these errors on FreeBSD. I'm proceding with the build anyway to see what happens. Don't worry :) It'll only take about 2.5 hours instead of 30+ now. > > install: ../test/Programs/Makefile does not exist > config.status: executing test/Programs/Makefile.programs commands > install: ../test/Programs/Makefile.programs does not exist > config.status: executing test/Programs/Makefile.tests commands > install: ../test/Programs/Makefile.tests does not exist > config.status: executing test/Programs/TEST.aa.Makefile commands > install: ../test/Programs/TEST.aa.Makefile does not exist > config.status: executing test/Programs/TEST.dsgraph.report commands > install: ../test/Programs/TEST.dsgraph.report does not exist > config.status: executing test/Programs/TEST.aa.report commands > install: ../test/Programs/TEST.aa.report does not exist > config.status: executing test/Programs/TEST.example.Makefile commands > install: ../test/Programs/TEST.example.Makefile does not exist > config.status: executing test/Programs/TEST.nightly.Makefile commands > install: ../test/Programs/TEST.nightly.Makefile does not exist > config.status: executing test/Programs/TEST.buildrepo.Makefile commands > install: ../test/Programs/TEST.buildrepo.Makefile does not exist > config.status: executing test/Programs/TEST.jit.Makefile commands > install: ../test/Programs/TEST.jit.Makefile does not exist > config.status: executing test/Programs/TEST.nightly.report commands > install: ../test/Programs/TEST.nightly.report does not exist > config.status: executing test/Programs/TEST.dsgraph.Makefile commands > install: ../test/Programs/TEST.dsgraph.Makefile does not exist > config.status: executing test/Programs/TEST.jit.report commands > install: ../test/Programs/TEST.jit.report does not exist > config.status: executing test/Programs/TEST.typesafe.Makefile commands > install: ../test/Programs/TEST.typesafe.Makefile does not exist > config.status: executing test/Programs/TEST.dsgraph.gnuplot commands > install: ../test/Programs/TEST.dsgraph.gnuplot does not exist > config.status: executing test/Programs/TEST.vtl.Makefile commands > install: ../test/Programs/TEST.vtl.Makefile does not exist > cd: can't cd to ../../../../test/Programs/External > config.status: executing test/Programs/External/Makefile commands > install: ../test/Programs/External/Makefile does not exist > cd: can't cd to ../../../../../test/Programs/External/SPEC > config.status: executing test/Programs/External/SPEC/Makefile commands > install: ../test/Programs/External/SPEC/Makefile does not exist > cd: can't cd to ../../../../../test/Programs/External/SPEC > config.status: executing test/Programs/External/SPEC/Makefile.spec commands > install: ../test/Programs/External/SPEC/Makefile.spec does not exist > cd: can't cd to ../../../../../test/Programs/External/SPEC > config.status: executing test/Programs/External/SPEC/Makefile.spec2000 commands > install: ../test/Programs/External/SPEC/Makefile.spec2000 does not exist > cd: can't cd to ../../../../../test/Programs/External/SPEC > config.status: executing test/Programs/External/SPEC/Makefile.spec95 commands > install: ../test/Programs/External/SPEC/Makefile.spec95 does not exist > config.status: executing test/Programs/MultiSource/Makefile commands > install: ../test/Programs/MultiSource/Makefile does not exist > config.status: executing test/Programs/MultiSource/Makefile.multisrc commands > install: ../test/Programs/MultiSource/Makefile.multisrc does not exist > cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/analyzer > config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/analyzer/test.in commands > install: ../test/Programs/MultiSource/Benchmarks/FreeBench/analyzer/test.in does not exist > cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/distray > config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/distray/Makefile commands > install: ../test/Programs/MultiSource/Benchmarks/FreeBench/distray/Makefile does not exist > cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/distray > config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/distray/test.in commands > install: ../test/Programs/MultiSource/Benchmarks/FreeBench/distray/test.in does not exist > cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow > config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/Makefile commands > install: ../test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/Makefile does not exist > cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow > config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/test.in commands > install: ../test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/test.in does not exist > cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/mason > config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/mason/Makefile commands > install: ../test/Programs/MultiSource/Benchmarks/FreeBench/mason/Makefile does not exist > cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/mason > config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/mason/test.in commands > install: ../test/Programs/MultiSource/Benchmarks/FreeBench/mason/test.in does not exist > cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/neural > config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/neural/Makefile commands > install: ../test/Programs/MultiSource/Benchmarks/FreeBench/neural/Makefile does not exist > cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/neural > config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/neural/test.in commands > install: ../test/Programs/MultiSource/Benchmarks/FreeBench/neural/test.in does not exist > cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2 > config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/Makefile commands > install: ../test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/Makefile does not exist > cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2 > config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/test.in commands > install: ../test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/test.in does not exist > cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/pifft > config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/pifft/Makefile commands > > > > On Sun, 05 Sep 2004 09:31:49 -0700 > Reid Spencer <reid at x10sys.com> wrote: > > > After the removal of llvm/test/Programs and insertion of llvm-test cvs > > module, the nightly tester showed the following: > > > > x86 Linux debug: > > * hard to say. I think it failed because the check in occurred just > > as it was starting up. Could someone verify for me? No results > > were produced. > > > > x86 Linux optimized: > > * everything ran okay > > * loc graph now shows 550k lines (up 350k!) - not sure what that's > > all about. I'll look at the loc counting code. It should have gone > > DOWN. > > > > x86 FreeBSD: > > * hasn't run with changes yet > > > > PPC Darwin: > > * hasn't run with changes yet > > > > SPARC V9 Solaris: > > * hasn't run with changes yet. > > > > We'll have to wait a few more hours for the last 3 platforms. It looks > > like things mostly build okay. If you update and try testing, please let > > me know how it goes. I'd like to hear about successes too as I'm pretty > > worried that its just flat out broken on non-Linux platforms. > > > > Reid > > > > _______________________________________________ > LLVM Developers mailing list > LLVMdev at cs.uiuc.edu http://llvm.cs.uiuc.edu > http://mail.cs.uiuc.edu/mailman/listinfo/llvmdev-------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20040905/5c77bb5e/attachment.sig>
Jeff, Actually, that was my fault. I forgot to remove the non-existent directories from the configure.ac file. That's done and committed now, so the advice is still the same: update configure script :) Reid. On Sun, 2004-09-05 at 09:53, Jeff Cohen wrote:> Configure gives me these errors on FreeBSD. I'm proceding with the build anyway to see what happens. Don't worry :) It'll only take about 2.5 hours instead of 30+ now. > > install: ../test/Programs/Makefile does not exist > config.status: executing test/Programs/Makefile.programs commands > install: ../test/Programs/Makefile.programs does not exist > config.status: executing test/Programs/Makefile.tests commands > install: ../test/Programs/Makefile.tests does not exist > config.status: executing test/Programs/TEST.aa.Makefile commands > install: ../test/Programs/TEST.aa.Makefile does not exist > config.status: executing test/Programs/TEST.dsgraph.report commands > install: ../test/Programs/TEST.dsgraph.report does not exist > config.status: executing test/Programs/TEST.aa.report commands > install: ../test/Programs/TEST.aa.report does not exist > config.status: executing test/Programs/TEST.example.Makefile commands > install: ../test/Programs/TEST.example.Makefile does not exist > config.status: executing test/Programs/TEST.nightly.Makefile commands > install: ../test/Programs/TEST.nightly.Makefile does not exist > config.status: executing test/Programs/TEST.buildrepo.Makefile commands > install: ../test/Programs/TEST.buildrepo.Makefile does not exist > config.status: executing test/Programs/TEST.jit.Makefile commands > install: ../test/Programs/TEST.jit.Makefile does not exist > config.status: executing test/Programs/TEST.nightly.report commands > install: ../test/Programs/TEST.nightly.report does not exist > config.status: executing test/Programs/TEST.dsgraph.Makefile commands > install: ../test/Programs/TEST.dsgraph.Makefile does not exist > config.status: executing test/Programs/TEST.jit.report commands > install: ../test/Programs/TEST.jit.report does not exist > config.status: executing test/Programs/TEST.typesafe.Makefile commands > install: ../test/Programs/TEST.typesafe.Makefile does not exist > config.status: executing test/Programs/TEST.dsgraph.gnuplot commands > install: ../test/Programs/TEST.dsgraph.gnuplot does not exist > config.status: executing test/Programs/TEST.vtl.Makefile commands > install: ../test/Programs/TEST.vtl.Makefile does not exist > cd: can't cd to ../../../../test/Programs/External > config.status: executing test/Programs/External/Makefile commands > install: ../test/Programs/External/Makefile does not exist > cd: can't cd to ../../../../../test/Programs/External/SPEC > config.status: executing test/Programs/External/SPEC/Makefile commands > install: ../test/Programs/External/SPEC/Makefile does not exist > cd: can't cd to ../../../../../test/Programs/External/SPEC > config.status: executing test/Programs/External/SPEC/Makefile.spec commands > install: ../test/Programs/External/SPEC/Makefile.spec does not exist > cd: can't cd to ../../../../../test/Programs/External/SPEC > config.status: executing test/Programs/External/SPEC/Makefile.spec2000 commands > install: ../test/Programs/External/SPEC/Makefile.spec2000 does not exist > cd: can't cd to ../../../../../test/Programs/External/SPEC > config.status: executing test/Programs/External/SPEC/Makefile.spec95 commands > install: ../test/Programs/External/SPEC/Makefile.spec95 does not exist > config.status: executing test/Programs/MultiSource/Makefile commands > install: ../test/Programs/MultiSource/Makefile does not exist > config.status: executing test/Programs/MultiSource/Makefile.multisrc commands > install: ../test/Programs/MultiSource/Makefile.multisrc does not exist > cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/analyzer > config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/analyzer/test.in commands > install: ../test/Programs/MultiSource/Benchmarks/FreeBench/analyzer/test.in does not exist > cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/distray > config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/distray/Makefile commands > install: ../test/Programs/MultiSource/Benchmarks/FreeBench/distray/Makefile does not exist > cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/distray > config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/distray/test.in commands > install: ../test/Programs/MultiSource/Benchmarks/FreeBench/distray/test.in does not exist > cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow > config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/Makefile commands > install: ../test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/Makefile does not exist > cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow > config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/test.in commands > install: ../test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/test.in does not exist > cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/mason > config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/mason/Makefile commands > install: ../test/Programs/MultiSource/Benchmarks/FreeBench/mason/Makefile does not exist > cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/mason > config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/mason/test.in commands > install: ../test/Programs/MultiSource/Benchmarks/FreeBench/mason/test.in does not exist > cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/neural > config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/neural/Makefile commands > install: ../test/Programs/MultiSource/Benchmarks/FreeBench/neural/Makefile does not exist > cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/neural > config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/neural/test.in commands > install: ../test/Programs/MultiSource/Benchmarks/FreeBench/neural/test.in does not exist > cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2 > config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/Makefile commands > install: ../test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/Makefile does not exist > cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2 > config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/test.in commands > install: ../test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/test.in does not exist > cd: can't cd to ../../../../../../../test/Programs/MultiSource/Benchmarks/FreeBench/pifft > config.status: executing test/Programs/MultiSource/Benchmarks/FreeBench/pifft/Makefile commands > > > > On Sun, 05 Sep 2004 09:31:49 -0700 > Reid Spencer <reid at x10sys.com> wrote: > > > After the removal of llvm/test/Programs and insertion of llvm-test cvs > > module, the nightly tester showed the following: > > > > x86 Linux debug: > > * hard to say. I think it failed because the check in occurred just > > as it was starting up. Could someone verify for me? No results > > were produced. > > > > x86 Linux optimized: > > * everything ran okay > > * loc graph now shows 550k lines (up 350k!) - not sure what that's > > all about. I'll look at the loc counting code. It should have gone > > DOWN. > > > > x86 FreeBSD: > > * hasn't run with changes yet > > > > PPC Darwin: > > * hasn't run with changes yet > > > > SPARC V9 Solaris: > > * hasn't run with changes yet. > > > > We'll have to wait a few more hours for the last 3 platforms. It looks > > like things mostly build okay. If you update and try testing, please let > > me know how it goes. I'd like to hear about successes too as I'm pretty > > worried that its just flat out broken on non-Linux platforms. > > > > Reid > > > > _______________________________________________ > LLVM Developers mailing list > LLVMdev at cs.uiuc.edu http://llvm.cs.uiuc.edu > http://mail.cs.uiuc.edu/mailman/listinfo/llvmdev-------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20040905/3dd253a9/attachment.sig>
That's weird. What is your default shell that Perl invokes with the "system" command. This works fine with bash-2.05b. Reid. On Sun, 2004-09-05 at 10:01, Vladimir Merzliakov wrote:> > x86 FreeBSD: > > * hasn't run with changes yet > > I manually start script. I use this options (+ -verbose now for testing) > > /home/wanderer/pkg/build/llvm/src/llvm/utils/NightlyTest.pl -parallel -enable-linscan > -noexternals -noremove :pserver:anon at llvm-cvs.cs.uiuc.edu:2401/var/cvs/llvm > /home/wanderer/pkg/build/llvm/night/build > /home/wanderer/pkg/build/llvm/night/testresults-X86-FreeBSD > > Log: > INITIALIZED > CVS Root = :pserver:anon at llvm-cvs.cs.uiuc.edu:2401/var/cvs/llvm-test > BuildDir = /home/wanderer/pkg/build/llvm/night/build > WebDir = /home/wanderer/pkg/build/llvm/night/testresults-X86-FreeBSD > Prefix = > /home/wanderer/pkg/build/llvm/night/testresults-X86-FreeBSD/2004-09-05 > CVSLog = > /home/wanderer/pkg/build/llvm/night/testresults-X86-FreeBSD/2004-09-05-CVS-Log.txt > BuildLog = > /home/wanderer/pkg/build/llvm/night/testresults-X86-FreeBSD/2004-09-05-Build-Log.txt > Changing To: CVS checkout directory > (/home/wanderer/pkg/build/llvm/night/build) > CHECKOUT STAGE > Syntax error: "(" unexpected (expecting ")") > Changing To: CVS Checkout directory > (/home/wanderer/pkg/build/llvm/night/build) > Changing To: llvm source directory (llvm) > Cannot change directory to: llvm source directory (llvm) at > /home/wanderer/pkg/build/llvm/src/llvm/utils/NightlyTest.pl line 133. > > Vladimir > > > _______________________________________________ > LLVM Developers mailing list > LLVMdev at cs.uiuc.edu http://llvm.cs.uiuc.edu > http://mail.cs.uiuc.edu/mailman/listinfo/llvmdev-------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20040905/6dc7dc79/attachment.sig>
Seemingly Similar Threads
- [LLVMdev] POST MORTEM: llvm-test changes
- [LLVMdev] POST MORTEM: llvm-test changes
- [LLVMdev] 2.2 Prerelease available for testing
- [LLVMdev] POST MORTEM: llvm-test changes
- Compare test-suite benchmarks performance complied without TBAA, with default TBAA and with new TBAA struct path