Dear all
I am trying to make a plot in xyplot lattice by groups. I would like to show
"0" in y axis but I don't want to be aligned with the x axis. I
want to be a little bit above.
I have tried many options but I don't get what I want. I also tried
ylim=c(0, 80) but both 0 and 80 are fully aligned with the x-axis and the upper
boundary of the plot, respectively:
xyplot(upper.zn + Zn2 + lower.zn ~ sdate | Location, type="b",
as.table=TRUE, data=dat, pch=c(22, 21, 22), lty=c(2, 1, 2), ylim=c(0, 80),
?????? index.cond=list(c(3, 1, 2)), ylab="Percent (%)",
par.strip.text=list(col="white", font=2, lines=1.5),
?????? lattice.options = modifyList(lattice.options(), list(skip.boundary.labels
= 0)),
?????? par.settings=my.settings, col=c("red", "black",
"red"), fill=c("red", "black", "red"),
?????? key=dat_key, scales = list(x = list(at = sdate, labels = format(sdate,
"%b-%y"))), xlab="Date",
?????? panel = function(x, y, ...) {
???????? panel.grid(h = -1, v = 0, lwd=1, lty=3,
col="grey")??????????????
???????? panel.abline(v=sdate, lwd=1, lty=3, col="grey")?????????????
???????? panel.xyplot(x, y, ...)
???????? }
???????? )
when I use the following, 80 is a bit lower than the upper boundary of the plot,
which is what I want, but 0 is not showing:?
xyplot(upper.zn + Zn2 + lower.zn ~ sdate | Location, type="b",
as.table=TRUE, data=dat, pch=c(22, 21, 22), lty=c(2, 1, 2),
?????? index.cond=list(c(3, 1, 2)), ylab="Percent (%)",
par.strip.text=list(col="white", font=2, lines=1.5),
?????? lattice.options = modifyList(lattice.options(), list(skip.boundary.labels
= 0)),
?????? par.settings=my.settings, col=c("red", "black",
"red"), fill=c("red", "black", "red"),
?????? key=dat_key, scales = list(x = list(at = sdate, labels = format(sdate,
"%b-%y")), y=list(at=c(0, 20, 40, 60, 80))), xlab="Date",
?????? panel = function(x, y, ...) {
???????? panel.grid(h = -1, v = 0, lwd=1, lty=3,
col="grey")??????????????
???????? panel.abline(v=sdate, lwd=1, lty=3, col="grey")?????????????
???????? panel.xyplot(x, y, ...)
???????? }
???????? )I have also attached a reproducible example in case you want to see in
more detail my data.?
I would very much appreciate any suggestions on this.?
Thank you in advance.
Kind regards,Maria
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: savedat.txt
URL:
<https://stat.ethz.ch/pipermail/r-help/attachments/20170911/9910a9f7/attachment.txt>
1. Not reproducible since my.settings, dat_key, sdate not provided. 2. Why did you not try something like ylim = c(-5,80) ? Cheers, Bert Bert Gunter "The trouble with having an open mind is that people keep coming along and sticking things into it." -- Opus (aka Berkeley Breathed in his "Bloom County" comic strip ) On Mon, Sep 11, 2017 at 12:33 PM, Maria Lathouri via R-help < r-help at r-project.org> wrote:> Dear all > I am trying to make a plot in xyplot lattice by groups. I would like to > show "0" in y axis but I don't want to be aligned with the x axis. I want > to be a little bit above. > I have tried many options but I don't get what I want. I also tried > ylim=c(0, 80) but both 0 and 80 are fully aligned with the x-axis and the > upper boundary of the plot, respectively: > xyplot(upper.zn + Zn2 + lower.zn ~ sdate | Location, type="b", > as.table=TRUE, data=dat, pch=c(22, 21, 22), lty=c(2, 1, 2), ylim=c(0, 80), > index.cond=list(c(3, 1, 2)), ylab="Percent (%)", > par.strip.text=list(col="white", font=2, lines=1.5), > lattice.options = modifyList(lattice.options(), > list(skip.boundary.labels = 0)), > par.settings=my.settings, col=c("red", "black", "red"), > fill=c("red", "black", "red"), > key=dat_key, scales = list(x = list(at = sdate, labels > format(sdate, "%b-%y"))), xlab="Date", > panel = function(x, y, ...) { > panel.grid(h = -1, v = 0, lwd=1, lty=3, col="grey") > panel.abline(v=sdate, lwd=1, lty=3, col="grey") > panel.xyplot(x, y, ...) > } > ) > when I use the following, 80 is a bit lower than the upper boundary of the > plot, which is what I want, but 0 is not showing: > xyplot(upper.zn + Zn2 + lower.zn ~ sdate | Location, type="b", > as.table=TRUE, data=dat, pch=c(22, 21, 22), lty=c(2, 1, 2), > index.cond=list(c(3, 1, 2)), ylab="Percent (%)", > par.strip.text=list(col="white", font=2, lines=1.5), > lattice.options = modifyList(lattice.options(), > list(skip.boundary.labels = 0)), > par.settings=my.settings, col=c("red", "black", "red"), > fill=c("red", "black", "red"), > key=dat_key, scales = list(x = list(at = sdate, labels > format(sdate, "%b-%y")), y=list(at=c(0, 20, 40, 60, 80))), xlab="Date", > panel = function(x, y, ...) { > panel.grid(h = -1, v = 0, lwd=1, lty=3, col="grey") > panel.abline(v=sdate, lwd=1, lty=3, col="grey") > panel.xyplot(x, y, ...) > } > )I have also attached a reproducible example in case you want to > see in more detail my data. > I would very much appreciate any suggestions on this. > Thank you in advance. > Kind regards,Maria > ______________________________________________ > R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see > https://stat.ethz.ch/mailman/listinfo/r-help > PLEASE do read the posting guide http://www.R-project.org/ > posting-guide.html > and provide commented, minimal, self-contained, reproducible code. >[[alternative HTML version deleted]]
Dear Bert and all,
I am really sorry. This is the full code:
dat<-read.csv("example.csv")attach(dat)
sdate<-as.Date(Date, format="%Y-%m-%d")
#change the colour of the strip background
my.settings <- canonical.theme(color=FALSE)
my.settings[['strip.background']]$col <- "blue"
dat_key <- list(space="right",
??????????????? lines = list(type = c("b", "b",
"b"), pch=c(22, 21, 22), col = c("red", "black",
"red"),
???????????????????????????? fill=c("red", "black",
"red"), lwd=1, lty=c(2, 1, 2)),
??????????????? text = list((c("upper se",
(expression(paste(Zn^paste(2,"+")))), "lower se"))))
xyplot(upper.zn + Zn2 + lower.zn ~ sdate | Location, type="b",
as.table=TRUE, data=dat, pch=c(22, 21, 22), lty=c(2, 1, 2),
?????? index.cond=list(c(3, 1, 2)), ylab="Percent (%)",
par.strip.text=list(col="white", font=2, lines=1.5),
?????? lattice.options = modifyList(lattice.options(), list(skip.boundary.labels
= 0)),
?????? par.settings=my.settings, col=c("red", "black",
"red"), fill=c("red", "black", "red"),
?????? key=dat_key, scales = list(x = list(at = sdate, labels = format(sdate,
"%b-%y")), y=list(at=c(0, 20, 40, 60, 80))), xlab="Date",
?????? panel = function(x, y, ...) {
???????? panel.grid(h = -1, v = 0, lwd=1, lty=3,
col="grey")??????????????
???????? panel.abline(v=sdate, lwd=1, lty=3, col="grey")?????????????
???????? panel.xyplot(x, y, ...)
???????? }
???????? )
Hope this helps.?
Kind regards,Maria
???? 10:15 ?.?. ???????, 11 ??????????? 2017, ?/? Bert Gunter
<bgunter.4567 at gmail.com> ??????:
1. Not reproducible since my.settings, dat_key, sdate not provided.
2. Why did you not try something like ylim = c(-5,80)? ?
Cheers,
Bert
Bert Gunter
"The trouble with having an open mind is that people keep coming along and
sticking things into it."
-- Opus (aka Berkeley Breathed in his "Bloom County" comic strip )
On Mon, Sep 11, 2017 at 12:33 PM, Maria Lathouri via R-help <r-help at
r-project.org> wrote:
Dear all
I am trying to make a plot in xyplot lattice by groups. I would like to show
"0" in y axis but I don't want to be aligned with the x axis. I
want to be a little bit above.
I have tried many options but I don't get what I want. I also tried
ylim=c(0, 80) but both 0 and 80 are fully aligned with the x-axis and the upper
boundary of the plot, respectively:
xyplot(upper.zn + Zn2 + lower.zn ~ sdate | Location, type="b",
as.table=TRUE, data=dat, pch=c(22, 21, 22), lty=c(2, 1, 2), ylim=c(0, 80),
?????? index.cond=list(c(3, 1, 2)), ylab="Percent (%)",
par.strip.text=list(col=" white", font=2, lines=1.5),
?????? lattice.options = modifyList(lattice.options(), list(skip.boundary.labels
= 0)),
?????? par.settings=my.settings, col=c("red", "black",
"red"), fill=c("red", "black", "red"),
?????? key=dat_key, scales = list(x = list(at = sdate, labels = format(sdate,
"%b-%y"))), xlab="Date",
?????? panel = function(x, y, ...) {
???????? panel.grid(h = -1, v = 0, lwd=1, lty=3,
col="grey")??????????????
???????? panel.abline(v=sdate, lwd=1, lty=3, col="grey")?????????????
???????? panel.xyplot(x, y, ...)
???????? }
???????? )
when I use the following, 80 is a bit lower than the upper boundary of the plot,
which is what I want, but 0 is not showing:?
xyplot(upper.zn + Zn2 + lower.zn ~ sdate | Location, type="b",
as.table=TRUE, data=dat, pch=c(22, 21, 22), lty=c(2, 1, 2),
?????? index.cond=list(c(3, 1, 2)), ylab="Percent (%)",
par.strip.text=list(col=" white", font=2, lines=1.5),
?????? lattice.options = modifyList(lattice.options(), list(skip.boundary.labels
= 0)),
?????? par.settings=my.settings, col=c("red", "black",
"red"), fill=c("red", "black", "red"),
?????? key=dat_key, scales = list(x = list(at = sdate, labels = format(sdate,
"%b-%y")), y=list(at=c(0, 20, 40, 60, 80))), xlab="Date",
?????? panel = function(x, y, ...) {
???????? panel.grid(h = -1, v = 0, lwd=1, lty=3,
col="grey")??????????????
???????? panel.abline(v=sdate, lwd=1, lty=3, col="grey")?????????????
???????? panel.xyplot(x, y, ...)
???????? }
???????? )I have also attached a reproducible example in case you want to see in
more detail my data.?
I would very much appreciate any suggestions on this.?
Thank you in advance.
Kind regards,Maria
______________________________ ________________
R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see
https://stat.ethz.ch/mailman/ listinfo/r-help
PLEASE do read the posting guide http://www.R-project.org/ posting-guide.html
and provide commented, minimal, self-contained, reproducible code.
[[alternative HTML version deleted]]
Hi Maria
Rule 1 make sure your data is in the right format
dat <- source("G:/1/savedat.txt")> dat
$value
Location Date Zn2 upper.zn lower.zn
1 upstream 2016-04-27 29.92477 55.59800 13.912207
2 spill 2016-04-27 12.84040 22.07006 6.964934
3 downstream 2016-04-27 22.49673 41.60901 11.739109
4 upstream 2016-06-28 23.98425 45.60219 10.690640
5 spill 2016-06-28 41.51336 77.99893 20.142426
6 downstream 2016-06-28 15.51232 26.94059 7.044781
7 upstream 2016-08-25 21.73037 40.95852 10.354620
8 spill 2016-08-25 13.42082 22.96901 7.472893
9 downstream 2016-08-25 10.99209 20.17471 5.324318
10 upstream 2016-10-25 20.82462 40.60564 9.602007
11 spill 2016-10-25 14.01283 25.07032 7.830504
12 downstream 2016-10-25 15.67740 30.42278 6.971944
13 upstream 2016-12-21 28.14966 51.79390 14.384139
14 spill 2016-12-21 13.91587 23.94368 8.164688
15 downstream 2016-12-21 13.02749 24.46930 5.826650
16 upstream 2017-02-20 31.16736 55.51858 15.938211
17 spill 2017-02-20 12.47368 22.03830 6.725540
18 downstream 2017-02-20 17.65741 33.23577 8.519928
$visible
[1] TRUE
dat <- dat$value
dat$dDate <- as.Date(as.character(dat$Date))
str(dat)
'data.frame': 18 obs. of 6 variables:
$ Location: Factor w/ 3 levels "downstream","spill",..: 3 2
1 3 2 1 3 2 1 3 ...
$ Date : Factor w/ 6 levels
"2016-04-27","2016-06-28",..: 1 1 1 2 2 2 3 3 3 4 ...
$ Zn2 : num 29.9 12.8 22.5 24 41.5 ...
$ upper.zn: num 55.6 22.1 41.6 45.6 78 ...
$ lower.zn: num 13.91 6.96 11.74 10.69 20.14 ...
$ dDate : Date, format: "2016-04-27" "2016-04-27"
"2016-04-27" "2016-06-28" ...
You code to reproduce the xyplot is not reproducible as it contains user defined
objects which you have not included.
Here is something to get you started,
If you want the measurement dates on the x-axis you will need to put the
required dates and format in the scales argument.
Using par.settings for the symbols an lines will pass those values onto key
xyplot(upper.zn + Zn2 + lower.zn ~ dDate | Location, data=dat,
type = "b",
as.table = TRUE,
par.settings = list(strip.background = list(col =
"transparent"),
superpose.symbol = list( col=c("red",
"black", "red"),
cex = 1,
pch = c(22, 21, 22)),
superpose.line = list (col=c("red",
"black", "red"),
lty = c(2, 1, 2),
lwd = 1)
),
auto.key = list(points = TRUE, lines = TRUE),
scales = list(x = list(alternating = FALSE,
at = seq(from = as.Date("2016-04-01"),
to = as.Date("2017-04-01"), by = "quarter"),
label = format(seq(from =
as.Date("2016-04-01"), to = as.Date("2017-04-01"), by =
"quarter"), "%Y %b"),
relation = "same",
rot = 60),
y = list(alternating = FALSE,
at = seq(0,80,20),
relation = "same",
rot = 0)
),
# pch=c(22, 21, 22),
# lty=c(2, 1, 2),
xlim = range(seq(from = as.Date("2016-04-01"), to =
as.Date("2017-04-01"), by = "quarter")),
ylim=c(-5, 80),
index.cond=list(c(3, 1, 2)),
ylab="Percent (%)",
# par.strip.text=list(col="white", font=2, lines=1.5),
# lattice.options = modifyList(lattice.options(),
list(skip.boundary.labels = 0)),
# par.settings=my.settings, col=c("red", "black",
"red"), fill=c("red", "black", "red"),
# key=dat_key,
# scales = list(x = list(at = sdate, labels = format(sdate,
"%b-%y"))), xlab="Date",
panel = function(x, y, ...) {
panel.grid(h = -1, v = 0, lwd=1, lty=3, col="grey")
panel.abline(v=dat$dDate, lwd=1, lty=3, col="grey")
panel.xyplot(x, y, ...)
}
)
As you have upper and lower levels of Zn you may want to look at ?panel.polygon
Regards
Duncan
Duncan Mackay
Department of Agronomy and Soil Science
University of New England
Armidale NSW 2350
-----Original Message-----
From: R-help [mailto:r-help-bounces at r-project.org] On Behalf Of Maria
Lathouri via R-help
Sent: Tuesday, 12 September 2017 05:33
To: R-help Mailing List
Subject: [R] show 0 at y axis in xyplot lattice
Dear all
I am trying to make a plot in xyplot lattice by groups. I would like to show
"0" in y axis but I don't want to be aligned with the x axis. I
want to be a little bit above.
I have tried many options but I don't get what I want. I also tried
ylim=c(0, 80) but both 0 and 80 are fully aligned with the x-axis and the upper
boundary of the plot, respectively:
xyplot(upper.zn + Zn2 + lower.zn ~ sdate | Location, type="b",
as.table=TRUE, data=dat, pch=c(22, 21, 22), lty=c(2, 1, 2), ylim=c(0, 80),
index.cond=list(c(3, 1, 2)), ylab="Percent (%)",
par.strip.text=list(col="white", font=2, lines=1.5),
lattice.options = modifyList(lattice.options(), list(skip.boundary.labels
= 0)),
par.settings=my.settings, col=c("red", "black",
"red"), fill=c("red", "black", "red"),
key=dat_key, scales = list(x = list(at = sdate, labels = format(sdate,
"%b-%y"))), xlab="Date",
panel = function(x, y, ...) {
panel.grid(h = -1, v = 0, lwd=1, lty=3, col="grey")
panel.abline(v=sdate, lwd=1, lty=3, col="grey")
panel.xyplot(x, y, ...)
}
)
when I use the following, 80 is a bit lower than the upper boundary of the plot,
which is what I want, but 0 is not showing:
xyplot(upper.zn + Zn2 + lower.zn ~ sdate | Location, type="b",
as.table=TRUE, data=dat, pch=c(22, 21, 22), lty=c(2, 1, 2),
index.cond=list(c(3, 1, 2)), ylab="Percent (%)",
par.strip.text=list(col="white", font=2, lines=1.5),
lattice.options = modifyList(lattice.options(), list(skip.boundary.labels
= 0)),
par.settings=my.settings, col=c("red", "black",
"red"), fill=c("red", "black", "red"),
key=dat_key, scales = list(x = list(at = sdate, labels = format(sdate,
"%b-%y")), y=list(at=c(0, 20, 40, 60, 80))), xlab="Date",
panel = function(x, y, ...) {
panel.grid(h = -1, v = 0, lwd=1, lty=3, col="grey")
panel.abline(v=sdate, lwd=1, lty=3, col="grey")
panel.xyplot(x, y, ...)
}
)I have also attached a reproducible example in case you want to see in
more detail my data.
I would very much appreciate any suggestions on this.
Thank you in advance.
Kind regards,Maria
Dear all,
Thank you very much for the help. ylim=c(-5, 80) worked.?
Regarding the reproducible example, I used dput () and saved the file as txt. It
is not the first time that I used this way and normally it works. Because when I
try to attach a .csv file with the data, most of the time it doesn't go
through.?
I will know for the next time.?
Many thanks.
Regards,Maria
???? 2:11 ?.?. ?????, 12 ??????????? 2017, ?/? Duncan Mackay <dulcalma at
bigpond.com> ??????:
Hi Maria
Rule 1 make sure your data is in the right format
dat <- source("G:/1/savedat.txt")> dat
$value
? ? Location? ? ? Date? ? ? Zn2 upper.zn? lower.zn
1? ? upstream 2016-04-27 29.92477 55.59800 13.912207
2? ? ? spill 2016-04-27 12.84040 22.07006? 6.964934
3? downstream 2016-04-27 22.49673 41.60901 11.739109
4? ? upstream 2016-06-28 23.98425 45.60219 10.690640
5? ? ? spill 2016-06-28 41.51336 77.99893 20.142426
6? downstream 2016-06-28 15.51232 26.94059? 7.044781
7? ? upstream 2016-08-25 21.73037 40.95852 10.354620
8? ? ? spill 2016-08-25 13.42082 22.96901? 7.472893
9? downstream 2016-08-25 10.99209 20.17471? 5.324318
10? upstream 2016-10-25 20.82462 40.60564? 9.602007
11? ? ? spill 2016-10-25 14.01283 25.07032? 7.830504
12 downstream 2016-10-25 15.67740 30.42278? 6.971944
13? upstream 2016-12-21 28.14966 51.79390 14.384139
14? ? ? spill 2016-12-21 13.91587 23.94368? 8.164688
15 downstream 2016-12-21 13.02749 24.46930? 5.826650
16? upstream 2017-02-20 31.16736 55.51858 15.938211
17? ? ? spill 2017-02-20 12.47368 22.03830? 6.725540
18 downstream 2017-02-20 17.65741 33.23577? 8.519928
$visible
[1] TRUE
dat <- dat$value
dat$dDate <- as.Date(as.character(dat$Date))
str(dat)
'data.frame':? 18 obs. of? 6 variables:
$ Location: Factor w/ 3 levels "downstream","spill",..: 3 2
1 3 2 1 3 2 1 3 ...
$ Date? ? : Factor w/ 6 levels
"2016-04-27","2016-06-28",..: 1 1 1 2 2 2 3 3 3 4 ...
$ Zn2? ? : num? 29.9 12.8 22.5 24 41.5 ...
$ upper.zn: num? 55.6 22.1 41.6 45.6 78 ...
$ lower.zn: num? 13.91 6.96 11.74 10.69 20.14 ...
$ dDate? : Date, format: "2016-04-27" "2016-04-27"
"2016-04-27" "2016-06-28" ...
You code to reproduce the xyplot is not reproducible as it contains user defined
objects which you have not included.
Here is something to get you started,
If you want the measurement dates on the x-axis you will need to put the?
required dates and format? in the scales argument.
Using par.settings for the symbols an lines will pass those values onto key
xyplot(upper.zn + Zn2 + lower.zn ~ dDate | Location, data=dat,
? ? ? type = "b",
? ? ? as.table = TRUE,
? ? ? par.settings = list(strip.background = list(col =
"transparent"),
? ? ? ? ? ? ? ? ? ? ? ? ? superpose.symbol = list( col=c("red",
"black", "red"),
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? cex = 1,
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? pch = c(22, 21, 22)),
? ? ? ? ? ? ? ? ? ? ? ? ? superpose.line = list (col=c("red",
"black", "red"),
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? lty = c(2, 1, 2),
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? lwd = 1)
? ? ? ? ? ? ? ? ? ? ? ),
? ? ? auto.key = list(points = TRUE, lines = TRUE),
? ? ? scales? = list(x = list(alternating = FALSE,
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? at = seq(from = as.Date("2016-04-01"),
to = as.Date("2017-04-01"), by = "quarter"),
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? label = format(seq(from =
as.Date("2016-04-01"), to = as.Date("2017-04-01"), by =
"quarter"), "%Y %b"),
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? relation? ? = "same",
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? rot? ? ? ? = 60),
? ? ? ? ? ? ? ? ? ? ? y = list(alternating = FALSE,
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? at =? seq(0,80,20),
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? relation? ? = "same",
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? rot? ? ? ? = 0)
? ? ? ? ? ? ? ? ? ),
#? ? ? pch=c(22, 21, 22),
#? ? ? lty=c(2, 1, 2),
? ? ? xlim = range(seq(from = as.Date("2016-04-01"), to =
as.Date("2017-04-01"), by = "quarter")),
? ? ? ylim=c(-5, 80),
? ? ? index.cond=list(c(3, 1, 2)),
? ? ? ylab="Percent (%)",
#? ? ? par.strip.text=list(col="white", font=2, lines=1.5),
#? ? ? lattice.options = modifyList(lattice.options(), list(skip.boundary.labels
= 0)),
#? ? ? par.settings=my.settings, col=c("red", "black",
"red"), fill=c("red", "black", "red"),
#? ? ? key=dat_key,
#? ? ? scales = list(x = list(at = sdate, labels = format(sdate,
"%b-%y"))), xlab="Date",
? ? ? panel = function(x, y, ...) {
? ? ? ? panel.grid(h = -1, v = 0, lwd=1, lty=3, col="grey")
? ? ? ? panel.abline(v=dat$dDate, lwd=1, lty=3, col="grey")
? ? ? ? panel.xyplot(x, y, ...)
? ? ? ? }
? ? ? ? )
As you have upper and lower levels of Zn you may want to look at ?panel.polygon?
Regards
Duncan
Duncan Mackay
Department of Agronomy and Soil Science
University of New England
Armidale NSW 2350
-----Original Message-----
From: R-help [mailto:r-help-bounces at r-project.org] On Behalf Of Maria
Lathouri via R-help
Sent: Tuesday, 12 September 2017 05:33
To: R-help Mailing List
Subject: [R] show 0 at y axis in xyplot lattice
Dear all
I am trying to make a plot in xyplot lattice by groups. I would like to show
"0" in y axis but I don't want to be aligned with the x axis. I
want to be a little bit above.
I have tried many options but I don't get what I want. I also tried
ylim=c(0, 80) but both 0 and 80 are fully aligned with the x-axis and the upper
boundary of the plot, respectively:
xyplot(upper.zn + Zn2 + lower.zn ~ sdate | Location, type="b",
as.table=TRUE, data=dat, pch=c(22, 21, 22), lty=c(2, 1, 2), ylim=c(0, 80),
? ? ? index.cond=list(c(3, 1, 2)), ylab="Percent (%)",
par.strip.text=list(col="white", font=2, lines=1.5),
? ? ? lattice.options = modifyList(lattice.options(), list(skip.boundary.labels
= 0)),
? ? ? par.settings=my.settings, col=c("red", "black",
"red"), fill=c("red", "black", "red"),
? ? ? key=dat_key, scales = list(x = list(at = sdate, labels = format(sdate,
"%b-%y"))), xlab="Date",
? ? ? panel = function(x, y, ...) {
? ? ? ? panel.grid(h = -1, v = 0, lwd=1, lty=3, col="grey")? ? ? ? ? ?
?
? ? ? ? panel.abline(v=sdate, lwd=1, lty=3, col="grey")? ? ? ? ? ? ?
? ? ? ? panel.xyplot(x, y, ...)
? ? ? ? }
? ? ? ? )
when I use the following, 80 is a bit lower than the upper boundary of the plot,
which is what I want, but 0 is not showing:
xyplot(upper.zn + Zn2 + lower.zn ~ sdate | Location, type="b",
as.table=TRUE, data=dat, pch=c(22, 21, 22), lty=c(2, 1, 2),
? ? ? index.cond=list(c(3, 1, 2)), ylab="Percent (%)",
par.strip.text=list(col="white", font=2, lines=1.5),
? ? ? lattice.options = modifyList(lattice.options(), list(skip.boundary.labels
= 0)),
? ? ? par.settings=my.settings, col=c("red", "black",
"red"), fill=c("red", "black", "red"),
? ? ? key=dat_key, scales = list(x = list(at = sdate, labels = format(sdate,
"%b-%y")), y=list(at=c(0, 20, 40, 60, 80))), xlab="Date",
? ? ? panel = function(x, y, ...) {
? ? ? ? panel.grid(h = -1, v = 0, lwd=1, lty=3, col="grey")? ? ? ? ? ?
?
? ? ? ? panel.abline(v=sdate, lwd=1, lty=3, col="grey")? ? ? ? ? ? ?
? ? ? ? panel.xyplot(x, y, ...)
? ? ? ? }
? ? ? ? )I have also attached a reproducible example in case you want to see in
more detail my data.
I would very much appreciate any suggestions on this.
Thank you in advance.
Kind regards,Maria
[[alternative HTML version deleted]]