similar to: freebsd domu 14, bad address

Hi everyone, I generated my own DomU guest using opensuse''s yast dirinstall and stored it on a seperate iscsi target. I created it as a DomU on my Domain0 (2.6.25.16-0.1-xen kernel) successfully, using the following configuration: name = "vm01-opensuse11-base-LAMP" memory = 256 kernel = "/boot/vmlinuz-xen" ramdisk = "/boot/initrd-xen" root =

Hi,    I''ve been using xVM with no problems since 2009.06 release (centos4/5, rhel4/5, sol10 as guests). This was using the 111a version. Just installed a new server with the 111b version and .... virt-install --nographics -p -r 8192 -n CentOS_48_64_92 -f /dev/zvol/dsk/zm0/vm/CentOS_48_64_92 -l ftp://192.168.101.120/pub/CentOS-48 -w bridge=aggr0 --os-type=linux --os-variant=rhel4

I have built a dom 0 using a Gentoo Linux kernel. All is up and running with no errors. I downloaded a Centos 4.4 image from the web and when I rum xm I get an error 22. Does anyone know what I am doing wrong and/or where I can find more documentation on running unmodified VMX guest domains. The Xen 3.0 Users Manual is out of date. Here is the control file: sun temp # cat

Hi there I get the following error message when i try to "xm create <domid>" Error: Error creating domain: (22, ''Invalid argument'') I have included everything i can think of Thanks The DomU config is kernel = "/boot/vmlinuz-2.6.12-xenU" ramdisk = "/boot/initrd-2.6.12.6-xenU.img" memory = 128 name = "xen01" nics=1 disk = [

Hi, I''ve prepared a Ubuntu 10.04 LTS server on a Xen 3.2-1 host running Debian Lenny on kernel 2.6.26-2-xen-amd64. The Ubuntu 10.04 domU is running a 2.6.32-24-server kernel from the Ubuntu repositories, which is (must be :-) ) xen-aware. The domU uses pygrub to boot and it works like a charm. Now I''m trying to deploy this domU on a Xen 3.2-1 host running Debian Etch on kernel

Hello, We''re running Xen Unstable changeset 15468 with SLES10 on a Unisys ES7000/one 56x cpu and 160GB memory. Xen is built with NR_DYNIRQS=1024 and max_phys_cpus=64, and booted with dom0_mem=1024 and xenheap_megabytes=64. We have 320 para-virtualized SLES10 VMs on external storage. Our script starts a VM, waits for the start to complete, then starts the next: "for i in *.cfg;

Hi guys, I cannot get my domU''s to boot. My current setup is as follows: Xen: 4.0.1 Dom0: Debian with custom linux 2.6.32.27 Xen kernel DomU: Same kernel as Dom0 When I try to start the VM, I just get: Error: (1, ''Internal error'', ''launch_vm: SETVCPUCONTEXT failed (rc=-1)\n'') And /var/log/xend.log says: [2011-01-23 15:36:01 3201] DEBUG

Hi guys, I cannot get my domU''s to boot. My current setup is as follows: Xen: 4.0.1 Dom0: Debian with custom linux 2.6.32.27 Xen kernel DomU: Same kernel as Dom0 When I try to start the VM, I just get: Error: (1, ''Internal error'', ''launch_vm: SETVCPUCONTEXT failed (rc=-1)\n'') And /var/log/xend.log says: [2011-01-23 15:36:01 3201] DEBUG

Hi, I got this error when starting a domU on Centos 5.1 i386, Device 0 (vif) could not be connected. Hotplug scripts not working. Why is this happening ? I should restart the machine to see if this still happends after a fresh network bridge. But it's somehow a production server, I would like not to restart it, if possible. No domU is currently running. I could start domUs a week ago.

Hi, I have a Xen server running OpenSuSE 10.2, with Xen version 3.0.3_11774. It''s happily hosting two DomU''s running the same OS / kernel. Now I tried to create a new DomU running a newer OS - OpenSuSE 11.1. It comes with Xen version 3.3.1_18494_03. Unfortunately for me, it doesn''t work - this is what I get: > xen1:/etc/xen/vm # xm create NEW > Using config file

Hi! Please help me. # xm create win7.hvm Using config file "./win7.hvm". Error: Device 768 (vbd) could not be connected. Path closed or removed during hotplug add: backend/vbd/9/768 state: 1 grep -v ^# /etc/xen/win7.hvm | grep -vx '''' kernel = "/usr/lib/xen/boot/hvmloader" builder=''hvm'' memory = 2048 name = "win7" vif = [

Next question:- eth0            8000.001c2596e32b       no              peth0 pan0            8000.000000000000       no virbr0          8000.000000000000       yes Presence virbr0 in report seems strange. Direct port  Xen 3.4.2  to F11 doesn''t install daemon libvirtd ( bridge virbr0 ) , unless you wrote xen-3.4.2-(x).fc12.src.rpm  yourself. So , from where bridge virbr0 comes 

Hi, I have a problem with a dom0 which is unable to launch my domU : all my dom0 are Debian Lenny amd64 with Debian kernel 2.6.26-2-xen-amd64 and xen-hypervisor-3.2-1-amd64. Then all domU (PV) are Debian Lenny amd64 too, with vanilla kernel 2.6.29.6. So, this new dom0 can''t launch any domU which are working on an other dom0. Software is same on both dom0, and hardware is near the

Hi guys, actually i use the following packages from etch-backports: =========================== ii linux-headers-2.6.18-6-xen-vserver 2.6.18.dfsg.1-18etch1 Common header files for Linux 2.6.18 ii linux-headers-2.6.18-6-xen-vserver-amd64 2.6.18.dfsg.1-18etch1 Header files for Linux 2.6.18 on AMD64 ii linux-image-2.6.18-6-xen-vserver-amd64

hi, I am trying to start a new domainU but got the error: Error: Device 0 (vif) could not be connected. Hotplug scripts not working I have struggled with it for a long time. I found somebody else report this but can not find a solution. The xen version is xen-3.0 latest version. I do not have a initrd. Domain0 works fine but when I create a new domain, it always gives an error as above. Thanks,

Hi Everyone, I''m trying to get Xen to use a native DRBD device but it seems it will not create the virtual machine. It does not seem to like the DRBD device type, any ideas on what might be wrong? I''m pretty sure my xen config file is OK and the DRBD device looks fine too. Full details below. xm create centostest Using config file "./centostest".

Package: xen-3 Severity: important After testing with waldi, he found out that the kernel arch cant be different as the xen-utils. So when using xen-amd64 with xen-utils-i386 the dom'Us wont work. xm create /etc/xen/test2.cfg gets: VmError: (22, 'Invalid argument') Debug: [2008-10-23 18:01:48 4211] DEBUG (XendDomainInfo:84) XendDomainInfo.create(['vm', ['name',

Hello all; I am trying to create SuSE10 guest under my FC5 host, this configuration has worked before but due to abnormal shutdown of my server i get the following error while trying to create the guest OS; ** the same configuration *used to* work just fine *#xm create -c /etc/xen/suse.cfg* ------------------------------------------------------------------------------------- Using config file

Hello, I''m using Xen (installed from source - "hg clone http://xenbits.xen.org/xen-4.0-testing.hg") on Debian Lenny. Dom0 kernel is 2.6.32-bpo.5-xen-686. Until now I have successfully ran the Lucid Ubuntu as domU guest, defining disks as (and also as file:): disk = [''tap2:aio:/home/xen/domains/lucid/disk.img,xvda1,w'',

Hello, It looks like xen 4.1.2* has some problems with solaris 11 iso images too (s. further below log messages) hvm-solaris11.born2b3.net.cfg # --- kernel = ''/usr/lib64/xen-default/boot/hvmloader'' builder = ''hvm'' device_model= ''/usr/lib64/xen-4.1/bin/qemu-dm'' name = ''solaris11hvm.born2b3.net'' acpi =