similar to: With RAID-Z2 under load, machine stops responding to local or remote login

Hail, caesar. I''ve got a 10-disk RAID-Z2 backed by the 1.5 TB Seagate drives everyone''s so fond of. They''ve all received a firmware upgrade (the sane one, not the one that caused your drives to brick if the internal event log hit the wrong number on boot). They''re attached to an ARC-1280ML, a reasonably good SATA controller, which has 1 GB of ECC DDR2 for

I've tried to setup multiple extension dialing - ie dial 1 number and it rings at a number of sources. For the most part its worked.... Now if someone dials 107 it rings Sip phones at 102 and 107, then goes to voicemail after 40 seconds. exten => 107,1,Dial(SIP/102&SIP/107,40|r) exten => 107,2,Voicemail(u102@pstn) exten => 107,3,Hangup exten => 107,102,Voicemail(b102@pstn)

[Just starting out with DTrace and was hoping to get some guidance.] I have a "benchmark" program that I monitored with both prstat (prstat -mL -P <PID>) and pfilestat (from the DTrace toolkit). Prstat reports LAT values in the 0.1-0.2% range, but pfilestat reports "waitcpu" values in the 6-10%. Since those two numbers supposedly represent time waiting for the CPU,

Hi. I installed solaris express developer edition (b79) on a supermicro quad-core harpertown E5405 with 8 GB ram and two internal sata-drives. I installed solaris onto one of the internal drives. I added an areca arc-1680 sas-controller and configured it in jbod-mode. I attached an external sas-cabinet with 16 sas-drives 1 TB (931 binary GB). I created a raidz2-pool with ten disks and one spare.

I''m looking for a suggestion on a good way to hunt down the source of high context switching and mutex contentions... Is dtrace the way to go now, or should I stick with something like lockstat? Russ This is a 5 second interval for mpstat: CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl 16 0 0 1115 1241 206 9095 912 2420 7393 0 12105 68 25

Under Solaris 10 u6 , No matter how I configured my ARECA 1261ML Raid card I got errors on all drives that result from SCSI timeout errors. yoda:~ # tail -f /var/adm/messages Jan 9 11:03:47 yoda.asc.edu scsi: [ID 107833 kern.notice] Requested Block: 239683776 Error Block: 239683776 Jan 9 11:03:47 yoda.asc.edu scsi: [ID 107833 kern.notice] Vendor: Seagate

hello! First of all thank you for all your information you give us on this sites. It is a great help to learn for example dtrace. i''ve a little script in work, which shows the cpu utilization per process in percent. this output is refreshed every 2 seconds for example. now i want to extend this script with the output of the allocated bytes of memory per process. how could i display this

Had an idea, could someone please tell me why it''s wrong? (I feel like it has to be). A RaidZ-2 pool with one missing disk offers the same failure resilience as a healthy RaidZ1 pool (no data loss when one disk fails). I had initially wanted to do single parity raidz pool (5disk), but after a recent scare decided raidz2 was the way to go. With the help of a sparse file

Hi, is the areca 1100 Raid Controller supported by CentOS 5? Or is there a kmod rpm available? Thanks Juergen

Folks, Perplexing question about load average display with prstat -Z Solaris 10 OS U4 (08/07) We have 4 zones with very different processes and workloads.. The prstat -Z command issued within each of the zones, correctly displays the number of processes and lwps, but the load average value looks exactly the same on all non-global zones..I mean all 3 values (1,5,15 load averages) are the same

Well, I''ve searched my brains out and I can''t seem to find a reason for this. I''m getting bad to medium performance with my new test storage device. I''ve got 24 1.5T disks with 2 SSDs configured as a zil log device. I''m using the Areca raid controller, the driver being arcmsr. Quad core AMD with 16 gig of RAM OpenSolaris upgraded to snv_134. The zpool

I have a SunRay server that I am looking at to determine some sizing requirements in my department. The machine has 16G of ram and 10G of swap. Currently, I have about 4G of swap used. I am wondering if dtrace/mdb can be used to find out what lwp/processes have been swapped out? Any hints? This message posted from opensolaris.org

I am looking for Dtrace scripts that can be used to collect data during performance tests. I am especially interested in IO but CPU, memory, threads, etc are needed as well. Thanks, Dave

I've finally got it to work, kind of .. It should allow you to log in, but several settings don't work yet and there are probably many bugs. Anyway, I thought I'd show this already in case someone is interested of looking how it works :) One thing I'm still wondering a bit is if I should show process names as: 32602 pts/19 S 0:00 dovecot/config 32603 pts/19 S

Today, I ran a scrub on my rootFS pool. I received the following lovely output: # zpool status larger_root ? pool: larger_root ?state: ONLINE ?scrub: scrub completed after 307445734561825856h29m with 0 errors on Wed Jul 15 21:49:02 2009 config: ??????? NAME??????? STATE???? READ WRITE CKSUM ??????? larger_root? ONLINE?????? 0???? 0???? 0 ????????? c4t1d0s0? ONLINE?????? 0???? 0???? 0 errors: No

Hi all, I have exchanged my Dell R610 in favor of a Sun Fire 4170 M2 which has 32 GB RAM installed. I am running Sol11Expr on this host and I use it to primarily serve Netatalk AFP shares. From day one, I have noticed that the amount of free RAM decereased and along with that decrease the overall performance of ZFS decreased as well. Now, since I am still quite a Solaris newbie, I seem to

Calling from PSTN let extension 601 ring twice, hang up and starts over again to ring twice, ... If I pickup I do not hear on extension 601, and on the PSTN it is still signaling to ring. Can anybody enlighten me, please? extension.conf [incoming_88097074] exten => s,1,Wait(1) ;wait to get caller ID in. exten => s,2,Dial(SIP/102,20) exten => s,3,Voicemail(u102) exten =>

The problem I am running into is that when the call to my cellphone is made, it appears as though the call "completes" so it never rolls to asterisk voicemail. Here is my current config: exten => 102,1,Dial(${sipura},10,) exten => 102,n,playback(pls-wait-connect-call) exten => 102,n,Dial(IAX2/asterisk1/9139275900,10,r) exten => 102,n,VoiceMail(u102@default) exten =>

Hi, I have a dovect 1.0.15 on my mailserver and as a Client I use offlineimap. Since some time now my mailsynchronisation got slow - I don't know exactly where the problem is, but I tried to track it down. Usually the UID-Searches are fast (according to the offlineimap-debugging) but as soon as it comes to big folders it takes a long time: [..] DEBUG[imap]: 37:15.22 < * 1

when check java process lock statistics, plockstat failed, please see below: # prstat -mLp 21162 PID USERNAME USR SYS TRP TFL DFL LCK SLP LAT VCX ICX SCL SIG PROCESS/LWPID 21162 7677 0.9 0.1 0.0 0.0 0.0 99 0.0 0.3 83 89 215 0 java/81 21162 7677 0.3 0.1 0.0 0.0 0.0 0.0 99 0.2 106 33 305 0 java/35 21162 7677 0.1 0.0 0.0 0.0 0.0 100 0.0 0.1 79 6 85 0 java/59