similar to: mainboard recommendations

Hi all, I would like to get my system to work with IOMMU. (The long-term goal is VGA passthru.) System is as follows: CPU: Core 2 Duo E6600 MB: Foxconn G9657MA-8EKRS2H (w. latest bios: 631F1P61) Virtualization support is enabled in BIOS. (These is only one option.) Hypervisor: xen 4.0.0 from Debian, AMD64 Xen config: iommu=verbose output of xen dmesg is attached. HVM domains work (lasd tried

Hello, Similar to others I have freezeups on the system, it is consistent with high IO load. If the system runs (even with multiple) XenU it does not happen. But I can consistently force the situation to occur. Running 4 dd processes dumping 20GB each on a LVM/mdadm soft RAID5 volume it consistenly crashes in a DomU. Running without XEN I do not see the problem at all - (e.g. after about 3TB of

Hi all!. First of all sorry about my English it''s not very fluid. I have a small server based upon Supermicro X7DBN (Chipset Intel® 5000P) motherboard and Intel Xeon E5320 (1,83Ghz) with 4Gb of FB-DIMM RAM. The OS is Debian Lenny in dom0 (2.6.26-2-xen-amd64) and Debian Lenny in domU (2.6.26-2-xen-amd64). Xen is 3.4.2 compiled from sources. The problem comes when I need to passthrough

Hi there! My problem is the following: I am experimenting with virtualization with XEN. I am running WinXP in a HVM host with a Debian Gnu/Linux (Etch) dom0. I am also using audio emulation (sb16). This way, sounds from WinXP work fine. And here comes the problem: The HVM guest completely reserves the audio device; other software can not use it. (mplayer says this: alsa-init: using ALSA

Now that FLAC has officionally joined the Xiph family, there are three different free audio codecs, which can be stored/transported using the ogg container. Would it be possible to create an API and/or a library that would cover them all? If my understanding of the situation is correct, if an application wants to support vorbis, speex and flac, it has to use three different interfaces.

Now that FLAC has officionally joined the Xiph family, there are three different free audio codecs, which can be stored/transported using the ogg container. Would it be possible to create an API and/or a library that would cover them all? If my understanding of the situation is correct, if an application wants to support vorbis, speex and flac, it has to use three different interfaces.

Now that FLAC has officionally joined the Xiph family, there are three different free audio codecs, which can be stored/transported using the ogg container. Would it be possible to create an API and/or a library that would cover them all? If my understanding of the situation is correct, if an application wants to support vorbis, speex and flac, it has to use three different interfaces.

Hola, creo tener un problema por que me suscribí a la lista hace varios días y nunca he recibido mensajes.... puede ser???? Como debería hacer para solucionarlo?? saludos Germán Lic. Germán García Ecología y Conservación de Aves Marinas Departamento de Biología, Facultad de Ciencias Exactas y Naturales, Universidad Nacional de Mar del Plata - CONICET Funes 3250 (B7602AYJ) Mar del Plata,

Hi, This might be a stupid question; I checked the FAQ, but could not find a solution. In Wine Config, I have only two drives configured: C: is ~/.wine/drive_c D: is ~ Still, when I run winefile (or any other wine app), besides drives "C" and "D", there is a "/" drive, which is the root directory of my real file system. Why is it still there, even if I

Hello Sa?o! I found you here: http://mail.opensolaris.org/pipermail/zfs-discuss/2012-May/051546.html "How about reflashing LSI firmware to the card? I read on Dell''s spec sheets that the card runs an LSISAS2008 chip, so chances are that standard LSI firmware will work on it. I can send you all the required bits to do the reflash, if you like." I got Dell Perc H310 controller

Hola a tod en s, tengo una duda que la comunidad R me puede ayudar. Estoy trabajando con gamlss, porque tengo una variable respuesta con valores entre 0 y 1 e incluidos estos. La distribución que utilizo com gamlss para este caso es "beta inflated" (Stasinopulos and Rigby 2007. Journal of Statistical Software 23(7)). El modelo que intento correr es: m1<-gamlss(Teleosteos ~

Hi, i was trying to install CentOS 5.1 on new machine based on Intel Q35 desktop board, witch 2 SATA disks (configured as RAID 1) , 8GB RAM and Intel Core2 QUADCORE. The first problem was with install - it hangs before installer startup at ACPI messages. So i installed it with ACPI=off switch. The first problem is : Dec 7 09:54:01 vmhost1 kernel: BIOS bug, no explicit IRQ entries, using default

Hi, Could someone please explain me what is the current status of the jack audio back-end? (Both midi and audio.) The feature to switch back-end seems to have disappeared from winecfg, and I can't find anything useful in the docs either. Thank you for your help: Kristof

Can this MB be used with Centos 4 (or 5)? For reference: http://www.logicsupply.com/products/ms_9832 I don't think we can use this new MB since the Realtek 8111C does not seem to be supported (well) http://forums.tweaktown.com/f69/8111c-nic-revision-ep45-27089/ -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- -

Hello all, when I do a signature request to puppetmaster, if no domainname is configured then puppet gets it from /etc/resolv.conf. Even if the "search" line is commented. I had to delete the search line in resolv.conf to obtain a signature request with hostname only, and then it appears with a final dot (hostname.). Is it that puppet does not like being domainless ? Many of my

Package: xen-utils-3.4 Version: 3.4.0-1 Severity: critical Justification: breaks unrelated software After installing xen-utils-3.4 besides my existing xen-3.2 system, I could not start xend-3.2 anymore. The message I was getting is this: "Failed to initialize dom0 state." As far as I know, xen 3.2 and 3.4 are supposed to be able to live peacefully on the same system. (The

I'm trying to pass-through my VGA card to a guest session. I found: http://www.linux-kvm.org/page/How_to_assign_devices_with_VT-d_in_KVM - which is very frustrating because there's no date on the documentation. I suspect it's old. It does clearly say that you must have VT-d support for pci pass-through. It then goes on to say "Some work towards allowing this ["software

Package: xen-utils-3.4 Version: 3.4.0-1 Severity: grave Justification: renders package unusable This packages should depend on the 3.4 version of xenstore utils and library, because it the Lenny versions are installed, xend crashes instead of starting up. (Many users choose to run lenny/sid hybrid systems, with lenny as default, so it's completely plausible that the wrong package will be

Hi, I have read your message about building a VirtualGL server in a xen domU at http://www.mail-archive.com/virtualgl-users@lists.sourceforge.net/msg00088.html . I plan to do exactly the same. Could you please share some of your experience? What HW have you chosen? Have you succeeded? According to the information at http://wiki.xensource.com/xenwiki/XenVGAPassthroughTestedAdapters ,

[please cc the answers to me, because I'm not on this list!] Hi there! Yesterday I downloaded the CVS version of icecast and ices. There are several example config files provided for ices in the conf/ directory. The ices-playlist.xml specifies encoding for one of the instances: <encode> <nominal-bitrate>64000</nominal-bitrate>