similar to: Install RHEL4 in Xen of RHEL5--"unable to retrieve the install image"

Hey, I was looking for step by step installation for RHEL5 as dom0 and RHEL5 as domU, but could not find it.I put some instructions, hope it will save some time for somebody. If you will find some errors please fix them :) I assume that you already have rhel 5 up and running (webserver as well).I will install guest system in paravirtualized mode (mine processor does not support full

I'm trying to install World of Warcraft on Ubuntu 6.06. I have followed the instructions on AppDB to build the patched version of Wine 0.9.18, and am now trying to install it. I am trying to install from iso files on my hard drive, not CDs. I have created a directory /media/fakecd, and I do "sudo mount -o loop disc1.iso /media/fakecd". I also used winecfg to add e: to the device

Hi All, I'm trying to figure out where the inittab is for a pxeboot/kickstart installation so that I can disable virtual terminals that allow for interactive input such as CTRL+ALT+F2. I've looked in the /etc directories for the pxeboot initrd as well as the stage2 and minstg2 files. Am I missing something grossly obvious here? -- James A. Peltier Systems Analyst (FASNet),

Hello, On doing "$ rsync --progress --archive --partial -vvv rsync://carroll.cac.psu.edu/redhat-ftp/redhat/linux/7.3/en/iso/i386/valhalla -i386-disc1.iso ", I got the following output <--------------------------------------------------------------------------- ------> local_version=24 remote_version=26 receiving file list ... recv_file_name(valhalla-i386-disc1.iso) received 1

I'm running: localhost(6.1-P)[21] uname -a FreeBSD localhost 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE #19: Wed Mar 15 07:15:25 PST 2006 root@g1-18.catwhisker.org.:/common/S2/obj/usr/src/sys/LAPTOP_30W i386 localhost(6.1-P)[22] I figured I'd grab a copy of the recent 6.1-BETA4 (disc1) ISO to try it out & hand it out to folks.... It seems to have worked, but I got a bit of a whine

hello, let me explain my problem : i've downloaded centos 3.4 on i386 the md5sum of CD1's iso file is OK i burn it on a CD with NERO and i have this problem in CD1 of centos 3.4 for i386 : ---------------------------- # file perl-5.8.0-88.9.i386.rpm perl-5.8.0-88.9.i386.rpm: RPM v3 bin i386 perl-5.8.0-88.9 # rpm -qlp perl-5.8.0-88.9.i386.rpm erreur: perl-5.8.0-88.9.i386.rpm: signature

Well, I screwed around a bit and after doing a "wbinfo -u" and a "wbinfo -g" I stopped getting the "unable to map SID" error. Now I'm getting a different error. ;-D [2004/05/25 09:09:34, 3] smbd/dosmode.c:unix_mode(111) unix_mode(FC2-i386-disc1.iso) returning 0744 [2004/05/25 09:09:34, 3] smbd/posix_acls.c:convert_canon_ace_to_posix_perms(2500)

The second RC build of the 10.0-RELEASE release cycle is now available on the FTP servers for the amd64, i386, ia64, powerpc, powerpc64 and sparc64 architectures. The image checksums follow at the end of this email. ISO images and, for architectures that support it, the memory stick images are available here (or any of the FreeBSD mirror sites):

Hi, I''ve been trying to boot from a RHEL4 install iso without much luck (the xen way). The Host is: RHEL 5.1 xen-3.0.3-41.el5 Here is my guest config: # -*- mode: python; -*- #============================================================================ # Python configuration setup for ''xm create''. # This script sets the parameters used when a domain is created using

Hi, I am a happy user of version 4.06 and have been hoping to upgrade the 5.x series (for the HTTP bits). I have the following problems with the 5.11-pre7 build: 1. TFTP load is horribly slow ... even when the two REAL machines are connected to the same switch. For a typical RHEL installation, the vmlinuz loads ... the initrd.img loads very very slowly and just times out (I waited over 10 mins)

Hey all, I've been fighting a samba share/unmount problem for several days now and may have found a bug in the connect/disconnect code. Basically, it seems that while everything claims to free the connection to the share, it doesn't actually happen. This is me closing ALL windows to the server: log.smbd: jon1 (192.168.200.2) connect to service disc1_pc_test as user breakit (uid=501

I have coded up the standard sendfd() and recvfd() for linux to send and recv file descriptors. seems to work (http://book.chinaunix.net/special/ebook/addisonWesley/APUE2/0201433079/ch17lev1sec4.html) however when I recvfd() my number of open file descriptors bumps by 2 and not 1. (using lsof -p X | wc -l) I am not sure why the count jumps by 2 and not 1. The sendfd() is just sending a socket

Hello, I can attach disc ISO image to cd-rom from virsh. And I can replace the ISO image from disc1 to disc2 using the 2nd example. (example) attach-disk guest01 /root/disc1.iso hdc --driver file --type cdrom --mode readonly attach-disk guest01 /root/disc2.iso hdc --driver file --type cdrom --mode readonly My question is, how can I disconnect the image from the cdrom drive using virsh. Because,

Dear List, I?m trying to figure out *memory page sharing***using HVM on Xen 4.0.1, but I?m not really able to find some useful information or sources about this issue. I just found two links porviding these sources: http://knol.google.com/k/learning-grant-tables http://blog.chinaunix.net/space.php?uid=20286427&do=blog&id=109114 Both are not working.. I think they are made for an older

Dear R-users, I am trying to make a plot with ggplot-geom_tile(), but cannot remove some unwanted (white) lines through my plot. Below a reproducible example: ##### library(ggplot2) tot=as.data.frame(rep(seq(-50,50,5),each=21)) names(tot)="precip" temp=rep(seq(-5,5,0.5),21) tot$temp=temp disc=array(dim=c(21,21)) for(i in 1:21){ for(y in 1:21){ temp<-

I just tried to boot the BETA3 disc1 iso on my Toshiba Satellite A64-S1762. I got a cryptic message: Too many holes in the physical address space, giving up <rest of copyright message here> PANIC (if I've gone into the BIOS at all), followed by a panic. Or I get a panic when probing the ohci device (either with or without a USB keyboard attached, the built-in keyboard is fried). Has

Hello. Dont know is this list right for this topic, but dont know witch one is. So I got 6.3-STABLE-200807-amd64-disc1.iso I have installed it cd /usr/ports/net/cvsup-without-gui/ make install make clean #cvsup some-stable-sup-file Connected to cvsup.xxxxxx.ru Bus error (core dumped) I cant get fresh src and ports trees and cant compile fresh 6.X-stable system with athlon64 optimization. :(

Hi all, I am trying to automate the provisioning of a few VM, dom0 CentOS5 - domU CentOS4.5, the installation goes well but it completely ignores the %post bit in the kickstart: # Kickstart file for a generic VM install url --url http://server/mrepo/centos4-x86_64/disc1 cmdline skipx reboot # Partition information ..... # General system config bootloader --location=mbr keyboard uk lang

The FreeBSD 7.1-BETA and 6.4-BETA builds are now available on the FreeBSD FTP mirror sites. This is the first step in the release process for FreeBSD-7.1 and FreeBSD-6.4. This set of builds do not include pre-built packages. The ISOs are available from: ftp://ftp.freebsd.org/pub/FreeBSD/releases/${arch}/ISO-IMAGES/7.1/ ftp://ftp.freebsd.org/pub/FreeBSD/releases/${arch}/ISO-IMAGES/6.4/

I have a data frame such as Name DISC1_5916 DABC2_789 ABCD_1234 I want to substring column Name so that DISC1 DABC2 ABCD ... Thanks. --------------------------------- [[elided Yahoo spam]] [[alternative HTML version deleted]]