similar to: 7.1, mpt and slow writes

Hi, I have a LSI Logic sata/sas raid running, is there a way to see the state of the volume, like optimal, degraded or resyncing? I've tried several commands with camcontrol but I cant figure it out. -- Peter Ankerst?l peter@pean.org http://www.pean.org/

Hi, As a next question to my building this server. I'm nogt able to get a full verbose dmesg. Probably because the kernelbuffer for it is too small. I know there used to be a kernel option to increase it. But I can not find it with the setting in NOTES or any other place I looked.... Is it still there? Thanx, --WjW

Hello, Since FreeBSD 9.1 I have strange problems with the distribution. Some servers are rebooting without any kernel panic, instanly. First i thought it's a problem with my KVM system, but one of my FreeBSD under a Dell R210 have the same problem. The servers concerned are now: - Monitoring server - LDAP test server - Some other servers, randomly (not in production). First i thought it's

Hi, I have strange problem when booting FreeBSD-6.x in HP Proliant ML370 G4. The problem is "-" appears on the screen and it never boots unless somebody hits the "Enter" key. Sometimes even PS2 keyboard doesn't respond during that time. Tried with USB keyboard, same problem. The machine has dual Xeon 3.2 GHz, 1GB of RAM and LSI Logic (mpt-5.0.5.20.00 bios) LSI1030-IT

Hi list, Are there any problems with the if_re ? After upgrade RELENG_7 on my laptop NIC stopped to work:( uname -a: FreeBSD notebook.minsk.domain 7.2-PRERELEASE FreeBSD 7.2-PRERELEASE #3: Fri Apr 10 20:38:55 EEST 2009 root@notebook.minsk.domain:/usr/obj/usr/src/sys/tiger-asus-a6m i386 notebook# dhclient re0 DHCPDISCOVER on re0 to 255.255.255.255 port 67 interval 3 DHCPDISCOVER on re0 to

I posted a thread on this once long ago[1] -- but we''re still fighting with this problem and I wanted to throw it out here again. All of our hardware is from Silicon Mechanics (SuperMicro chassis and motherboards). Up until now, all of the hardware has had a single 24-disk expander / backplane -- but we recently got one of the new SC847-based models with 24 disks up front and 12 in the

Hi all, I have faced yet another kernel panic that seems to be related to mpt driver. This time i was trying to add a new disk to a running system (snv_134) and this new disk was not being detected...following a tip i ran the lsitool to reset the bus and this lead to a system panic. MPT driver : BAD TRAP: type=e (#pf Page fault) rp=ffffff001fc98020 addr=4 occurred in module "mpt" due

All, This is slightly OT, but I figure a bunch of folks running IMAP servers should have some strong opinions on the topic. While working on a migration to Dovecot, I had the opportunity to move one account to a server running same. This is an in-house billing department box that 3-4 people share. In theory, this should work well - all the billing folks see the same email, save sent mail

Hello, I'm setting up a test server to work through the issues involved in bringing a bunch of vpopmail/qmail/courier users into a postfix/dovecot server. So far I'm seeing lots of info to aid in the transition. One thing I'm lost on is that since Dovecot is providing all the auth mechanisms rather than vpopmail, I'm not sure how to emulate a particular vpopmail behavior we

Hello, We recently moved from courier to dovecot, and I'm seeing a handful of errors that prevent people from retrieving email. Below is a snippet of the log sequence I see when this happens: Oct 10 13:44:24 mbox dovecot: imap(xxx at bway.net): Error: Cached message size smaller than expected (1759 < 1830) Oct 10 13:44:24 mbox dovecot: imap(xxx at bway.net): Error: Maildir filename has

According to various posts the LSI SAS3081E-R seems to work well with OpenSolaris. But I''ve got pretty chilled-out from my recent problems with Areca-1680''s. Could anyone please confirm that the LSI SAS3081E-R works well ? Is hotplug supported ? Anything else I should know before buying one of these cards ? Thanks, Arnaud

Hi guys, Looks like the MPT entry still has the pfn after PV dom0 call to decrease_reservation(). Not sure if this is a major bug, but confusing for debugging. For HVM guests, the MPT seems invalidated as side effect of invalidating the p2m. Btw, this in xen 4.1.3-rc1. Thanks, Mukesh

Hi all, I am using an USB memory stick as cache and log devices for a HDD ZFS pool named tank0: $ zpool status -v tank0 pool: tank0 state: ONLINE scan: scrub repaired 0 in 7h19m with 0 errors on Tue Jul 30 06:11:23 2013 config: NAME STATE READ WRITE CKSUM tank0 ONLINE 0 0 0 ada0s1d ONLINE 0 0 0 logs gpt/SLOG

Hello, I wanted to see if there's any chance that NUT will support a few new TrippLite UPSes that we just bought: Sep 9 01:42:25 miko /kernel: uhid0: TRIPP LITE TRIPP LITE OMNIVS1500XL, rev 1.1 I grabbed the devel sources via cvs, but am having trouble building it when I enable the "newhidups" driver: gmake[1]: Leaving directory `/usr/local/src/nut/common' drivers/

Hello all, I've got a test environment setup in preparation for a move from qmail/vpopmail/courier to postfix/padmin/dovecot. I have a number of questions that seem to span multiple pieces of software, and this is one of them... Our policy with spam filtering is that a user should be able to turn it off (ie: not put tagged spam into a spam folder, but deliver to their inbox) if they

Howdy, I had this working with lots of help for a developer before (Charles Lepple), but after upgrading to a somewhat more current version of FreeBSD the patched-up version stopped working. Seeing as this was more than a few years ago, I thought I'd give a new libusb and NUT a try to see if it might work out of the box. So far, no luck. Some info: FreeBSD 6.3 libusb 0.1.12 NUT 2.4.1

We recently had a disk fail on one of our whitebox (SuperMicro) ZFS arrays (Solaris 10 U9). The disk began throwing errors like this: May 5 04:33:44 dev-zfs4 scsi: [ID 243001 kern.warning] WARNING: /pci at 0,0/pci8086,3410 at 9/pci15d9,400 at 0 (mpt_sas0): May 5 04:33:44 dev-zfs4 mptsas_handle_event_sync: IOCStatus=0x8000, IOCLogInfo=0x31110610 And errors for the drive were

Howdy, I'm running Dovecot 1.1.16 on a staging server to do some testing before building a new server and moving a bunch of qmail/vpopmail/courier accounts over. I wanted to test the migration of courier accounts to dovecot with a few clients, so I copied over a few large accounts. All went well with a small account (100+ messages) when accessing the account via POP - no re-downloads

Hello everybody Unfortunately my problem still doesn't have any solution. But I have an interesting observation. The gateway freezes very quickly, if torrent client programs are running on workstations. I assume the cause of the problem consists in many number of TCP/IP connections that torrent client establishes. Any ideas? Maybe I can tune somehow a TCP/IP via kernel, sysctl or pf settings?

Greetings, In looking for inexpensive JBOD and/or RAID solutions to use with ZFS, I''ve run across the recent "VTrak" SAS/SATA systems from Promise Technologies, specifically their E-class and J-class series: E310f FC-connected RAID: http://www.promise.com/product/product_detail_eng.asp?product_id=175 E310s SAS-connected RAID: