similar to: Help with an HP Proliant gen10 plus?

On 1/9/23 01:37, Simon Matter wrote: >> Just starting and trying to boot off the SPP firmware update ISO image >> on a USB stick. >> >> I made the stick with: >> >> # mkfs.vfat /dev/sdb > ^^^^^^^^^^^^^^^^^^^^ > Why create an MS-DOS filesystem on the stick which gets immediately > overwritten in the next step? I think the idea is to get that first

> Just starting and trying to boot off the SPP firmware update ISO image > on a USB stick. > > I made the stick with: > > # mkfs.vfat /dev/sdb ^^^^^^^^^^^^^^^^^^^^ Why create an MS-DOS filesystem on the stick which gets immediately overwritten in the next step? > # dd bs=4M > if=P52581_001_gen10spp-2022.09.01.00-SPP2022090100.2022_0930.1.iso > of=/dev/sdb

hi guys, what I would like to ask is DDR4 3200Mhz in these server - has anybody tried? many thanks, L.

I have found a: HPE 873830-S01 ProLiant MicroServer Gen10 for <$300 without drives.? If I can believe the seller, it has a AMD Opteron X3216 Dual-core (2 Core) 1.6GHz and 8GB Installed. It has 4 3.5" bays. and 1? "Media" bay? https://www.servertechsupply.com/873830-s01/ this could well be acceptable.? Got to find out power draw.? Looks like ~40W. Any input on issues of OS

Hi > Continuing this thread, and focusing on RAID1. > > I got an HPE Proliant gen10+ that has hardware RAID support.? (can turn > it off if I want). What exact model of RAID controller is this? If it's a S100i SR Gen10 then it's not hardware RAID at all. > > I am planning two groupings of RAID1 (it has 4 bays). > > There is also an internal USB boot port. >

Hello everyone and best wishes for 2023 :) I have an old *Garmin Drive Smart 50 GPS* and I want to be able to attach it when it is in preboot mode to a VM hosted by a *Debian 11 host*. From what I understand, the preboot mode allows us to flash a firmware before the GPS actually starts (used among other things when the GPS is soft bricked). When I connect the GPS to the host it gives:

I am going to submit a proposal for a Xen BOF at DC18. Here is my first cut at a draft abstract: Title: Xen in Debian BoF Format: workshop with 25 min slot The Xen packages in Debian are in need of some work, including some tidying up, upstreaming of some Makefile patches, and updating to new versions. There is a large outstanding bug list. Also with the demise of Alioth and the

Greetings, Problem : Openssh3.6.1p2 on UnixWare 7.1.1 allows access to passwordless account without a valid key when sshd_config has PasswordAuthentication no + PermitEmptyPasswords yes Attempts: Installed maintence pack3 and recompiled both OpenSSH and OpenSSL (0.9.7b) with native c compiler. Recompiled both OpenSSH and OpenSSL (0.9.7b) with gcc (2.95.2). Still the same problem. Looking at

On Sun, Aug 6, 2017 at 4:42 AM, Jim Kusznir <jim at palousetech.com> wrote: > Well, after a very stressful weekend, I think I have things largely > working. Turns out that most of the above issues were caused by the linux > permissions of the exports for all three volumes (they had been reset to > 600; setting them to 774 or 770 fixed many of the issues). Of course, I >

I have been using rsync to sync a SQL database dump(127GB in size) on a server (cygwin to linux) for many years now w/o a problem, until they put a maintence plan to reindex the database once a week. This is all done over a 2Mbit link normally took 3-4 hrs now I noticed it was running the next day and took days so I looked into it more. After I discovered the --only-write-batch it makes a 52 GB

Hi, thanks for writing cptime, after manually adding it to the Makefile of a lwip git checkout it compiled fine (same about prdhcp) (only isohybrid complained about a missing uuid/uuid.h)... I have a 64bit VM with VMXNET3 and go there this result: [image: cptime.png] (can everybody see the picture?) The download of a 180MB large file (Parted Magic initrd) takes between 60 and 72 seconds,

Kenneth Boyd <zaimoni at zaimoni.com> writes: >>> Isn't is possible for cmake just to glob everything in the corresponding >>> directory? >>> >> >> Yes, but then the build would not notice a change on the file >> structure. You'll need to explicitly invoke cmake for being sure that >> whatever changes were made by the last svn

hi guys does anybody here runs on HPE ProLiant? I was hoping you can tell whether HPE support Linux Vendor Firmware Service and you actually get to upgrade ProLiants' BIOS/firmware via fwupdmgr? many thanks, L.

so I want to install c6.2 x86_64 onto a 2.7TB /dev/sda ... its a virgin machine with no software, using pxe boot. disk druid or whatever seems to only want to let me have like 2tb of default stuff, I'm guessing because its not using GPT? do I need to preboot into a shell or something and use parted before I can install ? -- john r pierce N 37, W 122 santa

Anusha Srivatsa (3): intel: PCI Ids for S SKU in CFL intel: PCI Ids for H SKU in CFL intel: PCI Ids for U SKU in CFL Ben Widawsky (1): intel/gen10: Add missed gen10 stuff Christian Gmeiner (1): etnaviv: submit full struct drm_etnaviv_gem_submit Dave Airlie (6): amdgpu: sync amdgpu_drm with kernel. drm: update drm.h to latest in drm-next. libdrm:

Previous-Subject: constants and line continuation Op 20100713 om 16:21 schreef Dag Wieers: > On Tue, 13 Jul 2010, Jim Cromie wrote: >> On Fri, Jul 9, 2010 at 3:22 PM, H. Peter Anvin <hpa at zytor.com> wrote: >>> On 07/09/2010 12:40 PM, Warren Block wrote: >>>> If these are FAQ entries, sorry, I searched but did not find. >>>> Maybe the wrong terms.

Hi, I try to execute the seven lines of code below to plot a graph. But I am failing as the messages below show. Where am I going wrong? install.packages("rgl") library(rgl) y_hat = X%*%B_hat open3d(windowRect = c(100,100,900,900),family = "serif") color = rainbow(length(y_hat))[rank(y_hat)] plot3d(educ,exper,wage,col = color,type = "s",size = 0.5,xlim =

Hello! I like to PXE boot the 'Dell 32 Bit Diagnostics' tool. I can create a harddisk image with the linux download package. The README of the Package gives an example how to create an memdisk entry for the pxelinux menu system: <quote> Create a Bootable HDD Image File Use of the resulting image to perform a Preboot Execution Environment (PXE) boot into the diagnostics

Óscar Fuentes wrote: > "Anton Korobeynikov" <asl at math.spbu.ru> writes: > > >>> at all, it would be great if you reflect your changes on the file list >>> inside the corresponding CMakeLists.txt when you add, remove or rename >>> a .cpp file. >>> >> Isn't is possible for cmake just to glob everything in the

Dear, InetBoot(GRUB+BuildRoot+HTTP-FUSE) boots Xenoppix(Xen2.0.6) with Plan9/DomU and NetBSD/DomU. You can feel old Xen environment. :-) ------------------------------------------------------------------------- InetBoot (GRUB + BuildRoot + HTTP-FUSE) is released. HP: http://openlab.jp/oscircular/inetboot/ Guide-PDF: http://openlab.ring.gr.jp/oscircular/inetboot/InetBoot-httpfuse080418-E.pdf