similar to: CentOS (2.6.9-42.0.8.ELsmp) and CentOS (2.6.9-42.0.8.EL)

Hello: I have a Supermicro SuperServer 5015P-TR. It has a Pentium D and is running CentOS x86_64. Can this machine use 8GB RAM? I think it should because it is running a 64 bit OS, but I am concerned because it is fundamentally 32 bit hardware. Anyone have any experience in this area? Thanks, Neil -- Neil Aggarwal, (832)245-7314, www.JAMMConsulting.com Eliminate junk email and reclaim your

Okay, so far so good - and many thanks to all who jumped in on this one. Now, we would like to look into making some changes in XFS, but I didn't see a SRPM for the kernel-module-xfs for 42.0.8 - the most recent one is for 42.0.3. Is this usable, or is there somewhere (else?) I can get the SRPM for the 42.0.8 XFS? Thanks. > -----Original Message----- > From: centos-bounces at

Hello: Is it possible to use Samba to send documents to a Microsoft Shared Fax Printer? How would I give it the phone number and other recipient details that normally comes in the popup window when I print to a shared fax printer from Windows? Thanks, Neil -- Neil Aggarwal, (214)986-3533, www.JAMMConsulting.com FREE! Eliminate junk email and reclaim your inbox. Visit

Hi , I am ruuning Senmail with MailScanner on CentOS 4.4. It has updated to kernel 2.6.9-42.0.8.EL from its past kernel 2.6.9-42.0.3.EL. Now the Server can not boot up and gives the below error. mkrootdev: label / not found Mounting root filesystem mount: error 2 mouting ext3 switchroot: mount failed: 22 Kernel panic - not syncing: Attempted to kill init! But I can boot up from its

Hello! I need to get an arcnet device driver up and running. Normally it appears to be distributed with linux, but not installed. So, I need to compile and install it, naturally. So, where is the kernel souce for 2.6.9-42.ELsmp? I can find kernel source for 2.6.9. BTW, I obtained 2.6.9 and tried compiling it, but all I got was *.o files and insmod: error inserting 'arcnet.o`: -1

Hello: When I installed CentOS 4.4 (from the ServerCD) on my server, I told it not to install a firewall and I disabled SELinux. The server is a SuperMicro 5015P-TR. I set up my own /etc/init.d/firewall with these rules: #!/bin/sh # Firewall script # # Source function library . /etc/init.d/functions RETVAL=0 # Some definitions (Will need to change ETH0_IP to match your configuration)

Hi, I currently have a few CentOs 4.X servers running the latest stock 2.6.9-42.0.2.ELsmp kernel. I notice kernel.org are now up to version 2.6.18 and many people are using the 2.6.17.11 Does anyone have any opinions with regards to the 17.11 and .18 kernels? I'm led to believe the latest centos stock kernels are the same anyway as are the backported Redhat ones. I'd be interested to

Hi, Here's he setup. Original Kernel: kernel-smp-2.6.9-42.EL, booting fine. Error with kernel-2.6.9-55.0.12.EL (and kernel-2.6.9-55.0.12.ELsmp) No volume groups found Volume group "VolGroup00" not found. ERROR: /bin/lvm exited abnormally! The system has a 3ware 9000 Storage Controller Model: 9500S-4LP Firmware FE9X 2.08.00.006, BIOS BE9X 2.03.01.052, Ports: 4. Anyone seen

Hi all, I'm not very used to CentOS and Linux generally speaking, though I read a lot and 'man' quickly became a very good friend of mine, right after Google, so sorry if that's a ridiculous one! (at least it'll give you a good laugh!) I updated the kernel to 2.6.9-42.0.2 recently and that raised a question... Simple... Yet silly...! What exactly is the difference between

Hi: I've tried to install centos 4.3 in a raid array, setuped on bios as mode "Adaptec". The chip is ICH7R but centos always sees 2 drives instead of the array that I create. I've contacted Supermicro support and they gave me this link ftp://ftp.supermicro.com/driver/SATA/Adaptec_ICH7R/Linux/Redhat/ , but the disk drivers I tried to use with centos 4.3 did not work, saying that

Hello: I booted from the CentOS 4.4 CD. I am trying to mount the partitions on the hard drive of the physical machine (Fedora Core). I did: mkdir /mnt/hda1 chmod 755 /mnt/hda1 mount /dev/hda1 /mnt/hda1 I get back: mount: /dev/hda1 already mounted or /mnt/hda1 busy I checked with df. I don't see hda1 anywhere. Any ideas what is wrong? Thanks, Neil -- Neil Aggarwal, (214)986-3533,

Does anyone know how to diagnose the error "Unable to handle kernel paging request at virtual address xxxxxx"? I got this error (followed by a panic and a crash) on a server running CentOS 4.4 with the 2.6.9-42.0.8.ELsmp kernel. The machine is based on an Intel 975XBX2 motherboard (975X chipset). I have built several of these and they have been extremely stable. This one is

Hello all. I have a centos 4.4 box (2.6.9-42.0.10.ELsmp) with 7gig of ram that doesn't seem to be using swap (also 7gig now). I say "seem" because I've noticed ram utilization run around 95% (with oracle and friends running) and then firing up a couple apps to use that last 5% will stop the machine dead in it's tracks. I ran across some reading[0] about

Hello... I have a server with 4 x SCSI drives and I would like to install Centos 4 (or 5) onto a software RAID 10 array. Do you know if this is possible? I noticed that under the Centos 4.92 beta, RAID 5 is an option but for some reason RAID 10 is not listed. There does appear to be a RAID 10 module.... /lib/modules/2.6.9-42.0.8.ELsmp/kernel/drivers/md/raid10.ko More info I found here:

Eve.8ryone, I have had a SuperMicro machine running Centos 5.8 that had been progressively updated with yum-cron from a 5.0 CD install. I upgraded the SuperMicro with more memory, switched out the CD with a DVD and tried to boot to the Centos x64 6.2 dvd. My plan was to test the memory before I added the hard drives, but I could not I could not get the machine to boot from the disc. I also

Everyone, I am putting together a new mail server for our firm using a SuperMicro with Centos 7.0. When performed the install of the os, I put 16 gigs of memory in the wrong slots on the mother board which caused the SuperMicro to recognize 8 gigs instead of 16 gigs. When I installed Centos 7.0, this error made the swap file 8070 megs instead of what I would have expected to be a over 16000

I did this twice now, although the first couple of builds seemed to work ok, they just weren't configured quite right. On my third and fourth builds of the 42.0.8 kernel rpm, when booting, kudzu came up and ran, but the keyboard was somehow not recognized and I had to reboot using the mouse on the login screen (no text appears no matter what I type). I'm using the rpm build strategy from

Everyone, about 4 years ago, I tried to install CentOS 6 on a Supermicro server with SCSI drives using a LSI raid system. I could never figure out or find a way to make the installation disc of Centos 6 identify the SCSI drives. The installation disc for Centos 5 identified the SCSI drives without a problem. I finally gave up on Centos 6 and installed Centos 5 and the system has worked very

Everyone, I have not been able to get ether-wake to work waking up other centos 7.6 machines after the upgrade to Centos 7.6. Has anyone else had this problem, and if so any luck with a fix? Greg Ennis

I'm having a server report a high load average when backing up Postgres database files to an external USB drive. This is driving my loadbalancers all out of kilter and causing a large volume of network monitor alerts. I have a 1TB USB drive plugged into a USB2 port that I use to back up the production drives (which are SCSI). It's working fine, but while doing backups (hourly) the