similar to: Password change

Hi Rowland, I tried that but didn't work. # AUTO-GENERATED FILE - DO NOT EDIT!! Use ldapmodify. # CRC32 9033b998 dn: olcDatabase={1}hdb objectClass: olcDatabaseConfig objectClass: olcHdbConfig olcDatabase: {1}hdb olcDbDirectory: /var/lib/ldap olcSuffix: dc=testdom olcAccess: {0}to attrs=sambaNTPassword,sambaPwdLastSet,sambaPwdMustChange by dn="cn=admin,dc=testdom" write by self

Hi Gruss, At this stage there is only one server, running 3.6.25 on Ubuntu12.04. The plan to get LDAP to work on this one. Then add the second server 4.x and the promote it to BDC and then demote this one. Just a side info, we didn't want to go tdbsam in both as I read it breaks the domain trust. The domain names are real ones. I ran the commands you suggested, nothing in reply. I tried

Am Montag, 5. März 2018, 22:16:36 CET schrieb Rob Thoman: > Hi Gruss, > > At this stage there is only one server, running 3.6.25 on Ubuntu12.04. > The plan to get LDAP to work on this one. Then add the second server > 4.x and the promote it to BDC and then demote this one. Just a side > info, we didn't want to go tdbsam in both as I read it breaks the > domain trust.

Hi Gruss, Had to ditch the VM and start again. Here is the info: tdbdump secrets.tdb |egrep -v '^data|^}|^{' key(21) = "SECRETS/SID/mydomain" key(18) = "SECRETS/SID/sam3dc" key(42) = "SECRETS/LDAP_BIND_PW/cn=admin,dc=mydomain" key(25) = "SECRETS/DOMGUID/mydomain" key(42) = "SECRETS/MACHINE_SEC_CHANNEL_TYPE/mydomain" key(42) =

On Thu, 26 Apr 2018 13:57:12 +1000 Robin G via samba <samba at lists.samba.org> wrote: > Hi Rowland, > > I tried that but didn't work. > # AUTO-GENERATED FILE - DO NOT EDIT!! Use ldapmodify. > # CRC32 9033b998 > dn: olcDatabase={1}hdb > objectClass: olcDatabaseConfig > objectClass: olcHdbConfig > olcDatabase: {1}hdb > olcDbDirectory: /var/lib/ldap >

Hi Samba List, I've been trying to get a samba+ldap working on centos 6.3. I've had some troubles adapting to the new slapd.d configuration format for the openldap, which seems unnecassarily complicated. Most of the tutorials refer to the older style slapd.conf configuration. I was following this tutorial:

Am Montag, 5. März 2018, 22:16:36 CET schrieb Rob Thoman: > Hi Gruss, > > At this stage there is only one server, running 3.6.25 on Ubuntu12.04. > The plan to get LDAP to work on this one. Then add the second server > 4.x and the promote it to BDC and then demote this one. Just a side > info, we didn't want to go tdbsam in both as I read it breaks the > domain trust.

Hi Guys, We're trying to add a BDC in Samb4 classic domain setup. The Samba 3 How -To and Samb3 by Example covers this but uses the old slapd.conf option, we are using the slapd.d config. I couldn't find a similar document for Samba4 Can you please advise that the following steps will work? LDAP in the existing PDC is working using the smbldap tools - Setup the LDAP in BDC

Hello, I wanted to configure dovecot for using auth_bind but didn't succeed to me it seems like it does always an anonymous bind. Dovecot version 2.1.1 (I started with 2.1.0 and hoped 2.1.1 would fix it) I tried to play around with the base, pass_attrs,pass_filter to no avail but didn't succeed. Looking at a wireshark trace i only saw 7 packets and it seemed to me dovecot did only

Hi Harry, When I install slapd , I didn't get the option to use MDB, so used hdb I went through your suggestions and cleaned up the smb.conf. Also added the unixidpool ldif dn: sambaDomainName=mydomain,dc=mydomain sambaDomainName: mydomain sambaSID: S-1-5-21-3936576374-1604348213-1812434911 sambaAlgorithmicRidBase: 1000 objectClass: sambaDomain objectClass: sambaUnixIdPool

Hi! I'm currently setting up a Samba 3 PDC. So far I managed to setup Samba with an OpenLDAP backend, but adding a user with the command "net rpc user add mg password -U root" results in the following error: Failed to add user 'mg' with: WERR_GENERAL_FAILURE. In the logfile it says: [2009/10/28 15:56:28, 0] passdb/pdb_ldap.c:ldapsam_create_user(5119)

Hello, I experimented the Metafor and Meta packages in the scope of replacing Excel for meta-analysis. I performed the first working example provided in Michael Borenstein's book "Introduction to Meta-Analysis" with Excel, Metafor and Meta. The numbers given by my spreadsheet, which I validated from Borenstein's book, conrespond quite closely to those given by Meta, but

On 14/11/2020 15:51, Rowland penny via samba wrote: > On 14/11/2020 12:56, Joachim Lindenberg via samba wrote: >> Sure. Here they are: >> >> root at cobra:/var/log/samba# cat /etc/apt/sources.list >> # See http://help.ubuntu.com/community/UpgradeNotes for how to >> upgrade to >> # newer versions of the distribution. >> deb

On 4.7.2019 19.00, Claudio Prono via dovecot wrote: Sorry to bother again, but the problem persist. I have checked all the configurations of dovecot, and seems all ok, but randomly the segfault pops up again, without no apparently reason. My packages are: ii dovecot-core 1:2.2.22-1ubuntu2.10 amd64 secure POP3/IMAP server - core files ii

Am 2017-11-11 um 13:36 schrieb Rowland Penny: > As far as I am aware, 'net use' sends the password unencrypted, so if > someone is trying to 'sniff' the password, they will get it, but then > if the password is stored in the bat file unencrypted and anybody can > read the bat file, they wont need to 'sniff' the password. Yes, we know ;-) The thin client with

Two attached patches for samba 2.2.7a and 3.0-alfa22, that I've made today, fix 3 bugs mentioned in my previous e-mail. 1) For each file in addition to ALLOW ACE proper DENY ACE is created. 2) "Take ownership" is shown DENIED for all except root ACEs 3) Read Permissions and read attributes are always shown as allowed, as they are actually allowed. -- Zhitomirsky

Hi, I work on MacOS, trying to Sweave an UFT8 document. AFAI remember R 2.14 used to render a warning when the encoding was not declared when using Sweave. With R 2.15 it seems to render an error. Sweave("sim_pi.Rnw") Error: 'sim_pi.Rnw' is not ASCII and does not declare an encoding Declaring an encoding by adding a line like \usepackage[utf8]{inputenc} in the preamble does

Hi, I found this article http://cyll.org/blog/tech/2006-08-09-themongrelcomet.html on mongrel and COMET very interesting. I ran the code, and it worked just as Christopher explained. The one thing I don''t understand is why mongrel can only handle 1 connection at a time. I thought that mongrel used a thread per connection. It appears that each registered handler can only handle 1

I have a windows 2003 AD domain and a server joined to that domain. Winbind is being used as an idmap. Most everything seems to work fine. Winbind gets user info correctly: [root@samba ~]# wbinfo -u TESTDOMAIN\administrator TESTDOMAIN\guest TESTDOMAIN\support_388945a0 TESTDOMAIN\krbtgt TESTDOMAIN\swhaley TESTDOMAIN\test [root@samba ~]# wbinfo -g BUILTIN\administrators BUILTIN\users

Hi, is it possible to let asterisk issue a SIP redirect? A SIP invite command by a SIP client should be answered by 30X Temporarly moved to SIP/.... Is this possible with asterisk, maybe from within the dialplan? (reinvite is not what I'm looking for, because it does not completely release the originally called SIP server, e.g. if reinvite fails, ...) Roger.