similar to: Linking Asterisk 1.8 to late model Samsung PABX over PRI - transfer issues

Hi, We are trying to port over a PABX to our network. Both PRI's seem to be live however, whenever someone dials out from the PABX Asterisk happens to report : -- Extension '' in context 'samsungincoming' from '736327438' does not exist. Rejecting call on channel 0/31, span 2 If crc4 is turned off, it reports a yellow alarm. Any suggestions? Regards, Sahil

Hi All, Can Asterisk dial extension which resides in the PABX? (eg. 2000) Sip Phone <-----> Asterisk <------> ATA (FXS) <------> (CO side) PABX <-----> Extension (eg. 1000) (2100 & 2101) can my sip phone call to pabx extension 1000? What will be my dial plan? I know I can connect to 1000 by

? Dear all, We are connecting the PABX with Application server.What we are trying is that when a nbr 1800 (this is not registered in PABX) is dialled the pabx should route the call to Application server .The PABX should also have intelligence to route the call by itself for its registered clients.For this scenario to work please guide us what are the files we need to change and other necessary

Hi Folks, I am running a SPA-3000 behind a legacy PABX on an analog line. I have been able to set up a dial plan that sends outgoing calls out to the appropriate VSP depending on prefix, and that part and the incoming call handling works fine. I am now trying to implement call pickup (dial 6*) or manual call forwarding (flash, dial extension). On the first of these I have worked out how to get

Hello all! I'm VERY new in using VoIP. I'm looking for any tip or trick to connect a physically PABX behind an Asterisk-System(or similar) via an SIP to Analog- or ISDN-Converter. The point is, I _need_ to deliver calls to extensions in the connected PABX directly (in ISDN-speech "DDI" (DirectDialIn)) without intervention of an operator. Is this technically possible, and if

Hi all, I have an Asterisk server connected in a PABX (TELEDATA) by channel Unicall.. I`m having problem when somebody call from PABX to Asterisk.. Eg: When somebody dial 1234, I received 1111112222333333444444 in the Asterisk CLI... If somebody can help me... or already saw this... Everton Goularth Uberlandia - MG - Brazil _______________________________________________________

Hi guys! I'm having one or two issues with queues hosted by an Asterisk machine where the clients are on a legacy PABX - at least for the interim. I fully expect most of these issues to be non-resolvable, but thought I'd at least ask to find out if there is some way of working around the issues. The legacy PABX is an NEC 7400 ICS connected to Asterisk via an E1 ISDN link. Calls are

Hi all, I've been lurking here and reading the Wiki for a month or so now, getting information on the suitability of Asterisk for my installation. I'm responsible for the technical stuff at a mostly-inbound call centre in Melbourne, Australia. Due to our rapid expansion, it's getting close to the time to put our old beloved Fujitsu 9600 PABX out to pasture. I'm evaluating

Hi guyz I m very much new to Asterisk and i want to establish a PABX for my house at the moment i have X100 card(Configured) Asterisk PABX(Installed) Now i want to know how would i recieve call for e.g. i want during incoming call (after demo mess). if user press 9 (for e.g) the call redirect to host1(for e.g. again).or if ne user of gnophone want to dial outside how would he do so . N e sort

Hi all,as good? It would like to know if already they had had success, in the integration of the functions of asterisk, with one pabx legacy (Avaya)for that pabx avaya, could use the voicemail of asterisk. For sample, user of pabx avaya, it would have its calls directed for not attendance and busy, for asterisk and asterisk, it would send the same one for the voicemail. Best Regards Josu?

Hi it's possible to use a Digium TE110P Single T1 / E1 PCI Interface for supply a E1 link to a old PABX ? Thanks

Good morning all, I have a question: if I want to connect an * to a traditionnal PABX via TDM04B to get PSTN line (incoming and outcoming call), are FXO enough (no analog phones connected to *)? I just want to add PSTN call (in and out) possibility for SIP or IAX UA. From what I saw here http://www.voip-info.org/wiki-FXO I'm right. Thanks. -- Daniel

Hi for all, i 've installed asterisk with isdn trunk with alcatel pabx. When alcatel users dial for external numbers, a channel on asterisk is allocated for dial. When we call to an number that is an IVR the digits isn't recognized by IVR. In sip.conf i putted dtmfmode as rfc... and info, inband is only for 64k codecs, and still don't work. How can i resolve this issue ?? Thanks.

Hello, I'm researching the possibility of using VOIP (SIP) with an existing PABX system. Ideally, the setup would be to dial an outside line through the PABX (that would actually link to the the VOIP gateway). At this point I would prefer not to purchase a hardware-based VOIP gateway. I would prefer to use a software-based gateway for research & testing purposes. Could anyone please

Call us on +91-9666 4000 48 - Mobiles <http://www.fosila.com/mobiles> - Cameras <http://www.fosila.com/cameras> - Laptops <http://www.fosila.com/laptops> - Bags <http://www.fosila.com/bags> - Watches <http://www.fosila.com/watches> - Toys <http://www.fosila.com/TeddyBears> Dear *User*, Unbelievable offer Limited stock. Grab it!! Samsung

Hi, I've now set up Asterisk to interface with our current Samsung iDCS 100 PBX via an 8SLI analogue extension card in the Samsung and an Openvox A400P04 4-FXO card in the Asterisk box. It all works in that I can place calls in both directions from the office Samsung extensions and Asterisk SIP extensions. The only tricky bit was getting the FXO to detect hang-up from the Samsung correctly -

I have the following configuration: VoIP Provider <----> Asterisk <----> Samsung PBX <---> PSTN ^ Asterisk has a few VoIP extensions connected, but most of the extensions are hanging of the Samsung PBX. Asterisk has 1 NT and 1 TE interface, which are connected to a TE and NT interface respectively on the Samsung PBX. This allows us to use the VoIP

I'm having trouble getting an Asterisk server to make outbound calls on my iDCS Trunks. I have idcs station to asterisk station working I have asterisk station to idcs station working However, I am unable to get Asterisk to utilize any outbound trunks on my iDCS.... Anybody have any ideas? ________________________________________________________________ Sent via the WebMail system at

Hi With my phone, Samsung delivers NPS software (New PC Studio) I can install it with Wine 1.3.26 on my Ubuntu 11.04 but when I try to run it, I get a lot of messages: Code: remy at remy-PC:~$ wine "C:\\Program Files\\Samsung\Samsung New PC Studio\\NewPCStudio.exe" err:ole:CoGetClassObject class {dee35070-506b-11cf-b1aa-00aa00b8de95} not registered err:ole:CoGetClassObject no class

Hello everyone, On February 8th, Samsung's Advanced Computing Lab will be meeting up with Compiler Engineers in the SF Bay Area. You will be able to learn about our home-grown mobile GPU and explore employment opportunities. Our compiler team uses the LLVM compiler framework to develop compilers for this GPU. Click this link for more info about out San Jose MeetUp on February 8th: