similar to: Can't start X with latest CentOS 50. kernel

I rebooted my machine this morning and now instead of running normally, my GLMatrix screen saver flashes as it repaints the screen, more and more noticeably as the screen fills up with glyphs. I didn't change ANYTHING and this was not happening before the boot. Anyone have any ideas why this might be? Thanks. Mark Hull-Richter, Linux Kernel Engineer DATAllegro (www.datallegro.com) 85

On 4/25/07, Michael D. Kralka <michael.kralka at kvs.com> wrote: > > I am going to regret answering this, because it is not the right place > for such questions. However... True, but thank you for the post. > I suspect you are misusing printk and the KERN_XXX prefixes (KERN_DEBUG, > KERN_ERR, KERN_INFO, etc.) defined in include/linux/kernel.h. Try > dropping the comma

I went to enable samba on my home machine, which has a largely plain vanilla install of CentOS 4.4 Plus, and the smbd and nmbd files are missing. As you may know, this makes it rather difficult to run samba. For some reason, the winbindd binary is present, and rpm reports: samba-common-3.0.10-1.4E.11 samba-client-3.0.10-1.4E.11 as present. So how do I retrieve the missing samba binaries/ Do

I just bit the bullet and installed CentOS 5 on my work desktop, and although I have two monitors and a card that supports them, I cannot get the display configuration to work with both as a continuous (spanning) desktop. I have tried using the correct (autodetected) monitor type (digital and analog), a generic LCD with 1280x1024, nothing works. Every time I set the configuration, the X server

I installed the kernel-2.6.18-8.el5.src.rpm today and went to build it, but it fails with this error: $ rpmbuild -bp --target=`uname -m` kernel-2.6.spec Building target platforms: x86_64 Building for target x86_64 error: Failed build dependencies: unifdef is needed by kernel-2.6.18-8.el5.x86_64 I double checked and this appears to be the latest kernel source rpm on centos/5.0/os/SRPMS.

Hello, I've got a new Centos5 install and got x installed with gnome on it. The problem is the display looks awful and keeps flickering. It failed the monitor probe and doesn't have horizontal and vertical refresh rates in the xorg.conf file. I believe this is part or all of the issue, i took it down to 8-bitt color and 800x600 resolution, that didn't help. The video card is

Inconpatibility CentOS 5 64 Bit + VMware Server ? Bye Gio

I'm running with CentOS 4.3 and the system was setup originaly with no development system and no kernel sources. I'm trying to get the headers and libraries installed and it is giving me fits. I've followed the suggestions on several threads and tried to yum install gcc, kernel-headers, kernel-devel but I seem to not be able to get /usr/include or use/include/sys packages... don't

I'd like to point out that overall I am quite pleased with CentOS 5, although I am having more fun with it than I did with 4.4 and I knew less about CentOS then (duh). Most things seem to work fine, including a relatively smooth installation from the DVD image I downloaded, although the number of screensavers I can see (and this could be related to the ATI/dual head problem) is pathetically

I've asked this almost everywhere else, so obviously I only find out about this list now (my doing, too). I am running VMWare Workstation on top of host CentOS 4.4 Plus on a Dell Precision 390 with 2G of main memory. Under VMWare, I am running a Windows XP guest OS. I have a similar setup at home except that the hardware is a little different but the memory and the setup are the same, and

I recently added a Seagate 400Gb SATA drive to my system, and it has been behaving strangely since I put it in. for one thing, the BIOS S.M.A.R.T. came up with a warning the last time I booted with it enabled, saying that I should backup my data and replace the disk (!). I still have not made any irreversible data transfers to this drive, and I have some time yet to take it back, but I'd

Hi! running a Centos 4.5 system here. This week when I do "yum update" I get this output: # yum update Loading "protectbase" plugin Setting up Update Process Setting up repositories kbs-CentOS-Extras 100% |=========================| 951 B 00:00 update 100% |=========================| 951 B 00:00 pidgin 100%

Hi, I am having some issues with CentOS 5. -XMMS stops playing MP3s without apparent reason. I leave it playing some album and it will just stop whenever it feels like it. It will go into "pause" and just stay there. Pressing on the pause button to resume does nothing at all. I thought it could be some newly encoded songs, but it does the same for a song that I have played 100% times.

Yesterday I found a need to have the NTFS module support in my CentOS 5.0 at home, so I happily installed the 8.1.4 source, prepped it (after deleting the rhel and olpc lines per Johnny's notice earlier in this list), made the config with a ".nx" version name using make menuconfig (copying the config from the SOURCES directory, editing it to include the # x86_64 line and copying it

I know this is a little off topic (not as usual, dammit!), but I figure at least one of y'all can handle this one. I have tried to configure my CentOS4.4 Plus desktop for samba sharing with the VMWare Windows that runs on it. However, no matter what I've done so far, I can't get the Windows to recognize this machine as a legitimate network destination. Here's my samba

I am running VMWare Workstation 5.5.4 on a CentOS 5.0 host (2.6.18-8.1.4 kernel) and I have been haiving some trouble with my sound device on the Guest Windows XP SP2 OS. When I first had trouble under CentOS 4.4, WS 5.5.3, it was usually when the sound device on the host was actually busy. However, now I can't use the sound device at all - I keep getting this error: "Failed to open sound

I thought I had all the tools I needed for this, but it seems something is missing. When I build the 2.6.18-8.1.3 kernel from source, I get this error: extracting debug info from /var/tmp/kernel-2.6.18-8.el5.trace-root/usr/src/kernels/2.6.18-8.el5.trace-x86_64/scripts/conmakehash extracting debug info from

I notice that the OO that comes with CentOS 4.4 is version 1.1.5, which is fairly ancient. Are there any plans to update this for OO 2.2, or 2.1, or 2.0? Or is this a RH thing exclusively? In which case is CentOS Plus likely to get a more recent version? OO 2.0 is way better.... Mark Hull-Richter Linux Kernel Engineer (949) 680-3082 - Office (949) 680-3001 - Fax (949)

I want to convert all my NTFS partitions to ext3 since I'm no longer running Windows, at least on my main machine at home. I'm planning to tar the NTFS partitions to an existing ext3, reformat the partition as ext3 and untar it back. What is the best way to accomplish step two of this - reformatting the partition? I've only done this so far during the installation phase, and that

I just put a USB hard drive into service, but find that unless the drive is connected to my PC the machine won't boot and drops to a shell. Below is the line I added to fstab. I thought that the option "noauto" would prevent the machine from trying to mount the drive /dev/sdb /usbdrive ext3 user,noauto,rw 0 2 What am I doing wrong? Any advice is