similar to: SPA112: one analog phone works, not the other

I have an asterisk server at home. I'm looking to replace my internal phones with sip cordless (DECT) phones. I'm now looking at the Siemens A510IP base ($90 ) and A510H handset ($40) and the Grandview DP715 base ($80) and DP710 handset ($45). The Siemens has a feature were I can also use a PSTN landline, but I not sure that's a great benefit. Has anybody tried these phones? I

Hi all, I'm not sure how this happened, but one of my customers managed to turn call forwarding on on his spa112. I thought I had that turned off in the provisioning file. I have this in the provisioning file: <Cfwd_All_Serv_1_>No</Cfwd_All_Serv_1_> <Cfwd_Busy_Serv_1_>No</Cfwd_Busy_Serv_1_> And I have a similar entry for line 2. When I dial the device, I use this

Hi, I have three Snom M3s at the moment but getting pretty fed up with the issues :( I am UK based and would be interested to hear of other peoples recommendations. Key features :- * VM Notification * Good Range * G729 codec support * Common/Private Address Books per Handset(s) TIA, Best Regards, -- This message has been scanned for viruses and dangerous content and is believed to be

Hi all, I have an SPA112 that in sitting behind a Ubee cable modem. The internet link is solid, but the device becomes unreachable within a day or so of being rebooted. Then the customer goes to reboot the device, they report that all 4 lights are lit. The ISP reports that the device does respond to ping, so it's not completely dead. I've had the same symptoms with SPA303's

We've deoplyed a number of pure VoIP wireless (wifi & proprietary) phones, but not dect. Is there a simple overview of integrating DECT phones with Asterisk somewhere? I assume the DECT basestation has a multi-account SIP VoIP interface, and the handsets are just plain old dect? Can you push configuration info to individual phones? (Are they individually addressible / configurable

Hi there, in case anyone is interested, I've just taken ownership of a small home network (3 handsets) of the brand new Siemens DECT PSTN/VOIP phone. It works great with Asterisk. Here's my overview and review so far... http://www.theopensourcerer.com/2008/04/27/siemens-gigaset-685ip-phones/ Cheers Al -- The way out is open! http://www.theopensourcerer.com

Hi, Searching this list archives, I couldn't find a definitive answer to my question : how to send SMS to Gigaset phones ? My goal is to send Alert SMS such as "This phone system will be stopped in 5mn for maintenance" to every terminal (SIP phones and Gigaset DECT phones). (So at the moment, I'm not looking for way to send SMS from handsets). I could successfully send 1 short

Hi folks, I wonder if any of you out there are using Siemens S685IP base station(s) (with S68H handsets) on Asterisk and experiencing problems with SIP registrations where the SIP extensions do not ring and peers become unreachable after a period of time. Symptoms are rather sporadic, but as described, SIP extensions being unreachable from Asterisk perspective. Also experienced 'not

Hi, I need to replace digital handsets in offices where there cabling is appareantly not Ethernet-compliant. Today's usage is to press a key to toggle between private ou public line before issuing an outgoing call. Are you aware of a DECT handset (to overcome cabling limitations) that mimic this line-key behaviour ? For instance, acceptable behaviours would be to dial number string and press

Hi, (please excuse me for lack of proper jargon usage and the vagueness of description...) i use Asterisk 11.12.1, (well... as included in FreePBX), I have several extensions that can register 2 separate devices (chan_sip) ( FreePBX calls this Devices & Users mode : Users are extension/internal number, devices are the 'SIP Accounts' for the internal 'endpoints' ) (this

Hello, My goal is to provision C450IP or S450IP models. Has anyone a hint to provision them from configuration files ? Usually, we use dedicated menu embedded inside Gigaset handset. An http server also exists but I couldn't find any dhcp-tftp combination to configure them. Any clue ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, I've got a provisioning file that I use to configure Cisco SPA112's. I'm wanting to get this file to do 3 things for me. I want to turn T.38 on, Call forwarding off, and Call waiting, off for both lines. but it's not working. This is what I'm using to enable T.38 for line 1. <FAX_Enable_T38_1_>Yes</FAX_Enable_T38_1_>

What I have is: * Asterisk 1.8.10.1~dfsg-1ubuntu1, * SPA112 ATA with analog fax in 1-st FXS port connected, * SIP trunk with provider supporting T.38. My network looks like this: * spa112 (192.168.33.200/24) and Asterisk (192.168.5.253/24) in neighbouring LANs, * Asterisk connects to the provider (80.75.130.136) via router (82.200.7.184). Router has full DNAT to Asterisk server. What happens?

G'day. I hope this isn't off-topic for the list. I am looking at an Asterisk setup that includes cordless phones. The three choices I can see, at this stage, are: * wifi phones * an ATA and a cordless analog phone * a DECT to SIP basestation The various wifi phone options don't grab us as suitable -- they are costly, have poor battery life and even the best have pretty mixed

Hi all, I've got a device that seems to become unreachable for about 2 minutes, every hour. From what I can tell, it isn't due to network or server issues. Any ideas? TIA. -- Mike Diehl Diehlnet Communications, LLC. Voice: (505) 903-5700 Fax: (505) 903-5701

Hi, With my Gigaset C470IP (with latest 02223 firmware), I can't find a way to access SMS settings from web configuration app or using a handset. Has someone been more successful without using auto-configuration mode ? (For instance, manual says an SMS entry is showing on handset screen but as I plugged my base station into a private LAN, I skipped the whole auto-configuration process ).

For some unfathomable reason, Siemens USA doesn't offer the Gigaset IP range in the U.S. I'm particularly interested in the Gigaset S685 IP. Since it's DECT 6.0, and there's an English (UK) version, I'm thinking it should work just fine, after dealing with the walwart issue (and maybe caller ID signalling). Anyone imported one from the UK and using it in the US? for how

Hi! I have exactly the same problem on asterisk 1.8.22.0 and also on separate 11.2.1 when sending fax to PSTN. Tryed with spa-3102, spa-2102, Patton Smartnode 4634, and Zoiper softphone. SpanDsp also works without any problem on my box. As I remember it was a bug in 1.8.1.x that the a=T38MaxBitRate paramater was sent as "maxBitRate". Without capital "M". Are you closer to

Basically, pretty much all the 2 line cordless systems I've seen come with a built in digital answering system that I'll never use, the main problem with this is that these units don't support VMWI (visual message waiting indicator) with telco supplied voicemail. This is a problem because I'll be setup an Asterisk system in the next month or so to handle my 2 analog and 1

Hi, It seems to me that DECT Gigasets do not support MWI when connected to a Polycom/Kirk DECT base station : when a new message is dropped into user's mailbox, I can see a NOTIFY message sent by Asterisk to Polycom/Kirk DECT base station (here a KWS300) but Gigaset's handset MWI remains unlit. At the same time, a Polycom/Kirk handset subscribed to the same base station would turn its MWI