similar to: share mailbox Asterisk 1.8.22

Salam, I am using CentOs 4.4, i have network printer with ip 192.168.1.88. when i click the option to print document, it seems everything is OK, printer shows with bliking of Data light but no print..... what i am missing??? Regards, Umair Shakil ETD

While playing around with panther I discovered (with surprise) that tcltk seems to work (even if not smoothly) with RAqua without first calling tkStartGUI. I switched back to 10.2.6 and it works as well. I think this is due to the "last minute" fix in RAqua now using idle timers because of too much cpu usage. Some "mouse" trick is needed though. If you want to test it you

Hello All, I upgraded Asterisk 1.8.10 to Asterisk 1.8.22 since upgrading I can't get meetme feature to work when dial meetme extension, can you please help? It always worked before, also I do not have dahdi installed on this machine, never did. -- Executing [104 at sipphones:1] MeetMe("SIP/101-00000813", "104") in new stack == Parsing

I have a new asterisk installation (1.4.2) that is working fine with SIP. Now I'm trying to add 2 cisco ip phones (7960) running SCCP (latest chan_sccp). I have the phones booted, and the tftp directory all setup, etc. But the phones do not quite work right. When I lift the handset I only get a dial-tone 1 out of 5 or so times I try, though hitting the speaker button works. I can dial

Hello, recently I have seen spike in attacks on my asterisk server, this is what I get on the LCD of my phone: 201 at 76.220.5.205 or calls from 1000 sip1000 at 76.2230.5.205, have any idea on how to stop this calls? Thanks, -------------- next part -------------- An HTML attachment was scrubbed... URL:

I've configured Asterisk 0.7.2 to work together with Cisco ATA186 (SIP,G.711. RFC2833) and OpenPhone (H.323, G.711). But there is an issue while calling from ATA186 to OpenPhone via Astrisk - when I press any key on analogue phone connected to ATA, Asterisk shows following message: -- Executing Dial("SIP/519-3781", "OH323/62.213.36.100|20|Tt") in new stack --

Hi all, I have Asterisk running on FreeBSD 4.x and I have made configurations to sip.conf, extensions.conf and voicemail.conf. I have also setup SIP phones on two different PCs. My problem is that when one of the SIP phones logins in, the other won't. My sip.conf has: [101] type=friend host=dynamic username=101 secret=test dtmfmode=rfc2833 context=from-sip mailbox=201

Hello, I have a fully functional Asterisk Server, I want to configure this server to be able to process call from Skype, can someone point me to a howto? or if there are suggestions on best way to approach this problem. Thanks, -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hey folks, I have a difficult (at least for me) problem that I was hoping one of you may know how to solve. I want to assign a sequence to subsets of a variable in a data frame based on date. The variable is 'SITE1' and the date is a unique day (DD) and month (MM) combination. The sequence contains site numbers 101:104, and each day-month combination takes four site numbers from that

Hi. I have a question related to freebsd opie implementation. I am running 4.9-RELEASE and I've tried to setup opie. *** 1 *** opiepasswd/opiekey I've added user using `opiepasswd -c "ssa"` mx2# opiepasswd -c "ssa" Adding ssa: Only use this method from the console; NEVER from remote. If you are using telnet, xterm, or a dial-in, type ^C now or exit with

I've been beating myself up over this script but clearly I'm missing something. If I enter an extension like 101 it rings through fine, but if I pick 2 for sales it hangs up with this message: == Spawn extension (sales, s, 1) exited non-zero on `Zap/1-1' Since I'm not sure what that exacly means I cannot take appropriate action. Any help would be appreciated. [default]

In some situations I got the following message on asterisk console: * Autodestruct on dialog '857128833 at 192.168.2.129 <857128833 at 192.168.2.129>' with owner SIP/1015-00000002 in place (Method: BYE). Rescheduling destruction for 10000 ms* I would like to raise a manager event, to take some action when it is happening. To do so, I believed that was just a matter of adding an

Good Day everyone, Yesterday I upgraded the firmware on my 7960 to Sip 8.12 as provided by Cisco, however now the phone does not and will not read the RINGLIST.dat file. I've tried rebooting the phone, tried resetting the phone back to factory, have deleted the RINGLIST.dat file and reloaded the phone then reinstalled the RINGLIST.dat, and still the bloody phone will not read the file.

Hello, I noticed Asterisk 1.8.4.1 execute number dial twice Log == Using SIP RTP CoS mark 5 -- Executing [912066604 at sipphones:1] Set("SIP/4773-0003e920", "CALLERID(num)=2066604") in new stack == Extension Changed 4773[sipphones] new state InUse for Notify User 4701 -- Executing [912066604 at sipphones:2] Dial("SIP/4773-0003e920",

Hello All, one of the extensions fall into a loop, I don't know how to hangup that channel -- Executing [i at autoatten:2] Goto("Local/100 at sipphones-000001b2;2", "s,2") in new stack -- Goto (autoatten,s,2) -- Sent into invalid extension 's' in context 'autoatten' on Local/200 at sipphones-000001b2;2 -- Executing [i at autoatten:1]

Hi all, I'm having issues with overwrite caller id, when I call someone my caller id should be "mycompanyinc" but instead my id shows up as my extension number 101. this is what i have in sip.conf [101] type=friend context=sipphones call-limit=99 callerid="iuser 101" disallow=all allow=ulaw allow=alaw username=101 secret=Passwd dtmfmode=rfc2833 host=dynamic mailbox=101 at

Hello. I'm new with asterisk. Can you help me in this: I have cisco sip phone (601) connected to asterisk server, and 1 client number (500). I want to dial from 601 to 500. But get error in cli console: [Apr 27 15:30:15] NOTICE[9650]: chan_sip.c:20059 handle_request_invite: Call from '601' to extension '500' rejected because extension not found. What's wrong?

I'm trying to add a second extension to my setup. The second device is able to successfully connect to the Asterisk server. I am unable to contact extension 101 from 102 and vise-versa. Also are my context setup logically or is there a better fashion to organize them? My error is at the bottom. Here is the extension.conf [default] ; ; By default we include the demo. In a production system,

Hello list, this is my first post on this list. I have a server with Asterisk and a Linksys SPA3102 with 3 SIP phones. I have configured the SPA PSTN line as trunk to receive and send calls. I can call outside from SIP phone throw the PSTN line and all is OK, the problem is when I receive a call from the PSTN, on the out caller phone there is a demo playback. I want to redirect the call to a

Extreme N00b, I am getting the error message "a target does not exist" when running the make install inside the zap directory, probably pretty common, possibly a package I didn't install, just need some insight on it. The same occurs with the libpri and asterisk. -----Original Message----- From: asterisk-users-bounces@lists.digium.com