similar to: P2P

Deepak, i think you can look to this option too : http://sourceforge.net/projects/rcc/ The project is in developpment....but within 1 or 2 weeks i think it will be a good project....especially who linux network''s owner. rgds, Erwan le Doeuff _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:

Hello all, I need a very simple routing protocol for VPN redundancy. We have several sites and each site has a Linux router and two IPCops each with an ADSL connection to the internet using different ISP''s. I have configured VPN''s between all of the sites for each IPcop on ispA and the same for the IPCops on ispB. This way, if one of the ISP fails, I change the route on the

hello anybody knows where i could find information about tc filters add ... etc because i can''t find the man pages or any other source of information. thanks _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

please, help, i have build vpn server (suse 9 + poptop), i have managed to implement tc htb in ip-up script, but every client has own ppp interface (ppp0, ppp1, ppp2...), and my idea is to share available bandwidth, not to limit connection, how to build root tc rule, when I have more then one interface?... please any one width experiance regards _______________________________________________

Hello R-users I am new to R and trying to write some functions. I have problems writing functions that takes a data set as an arguement and uses variables in the data. I illustrate my problem with a small example below: sample data #------------------ visual24<-rnorm(30,3,5) visual52<-rt(30,7) dats<- data.frame(cbind(visual24,visual52)) remove(visual24, visual52)

On Fri, 2023-07-28 at 19:55 +0000, Himanshi Yadav via samba wrote: > Jul 28 09:18:51 midway3-dm1.rcc.local winbindd[1056745]:??? #15 /lib64/libtevent.so.0(tevent_common_loop_immediate+0x27) [0x7fbf521f6ca7] > Jul 28 09:18:51 midway3-dm1.rcc.local winbindd[1056745]:??? #16 /lib64/libtevent.so.0(+0xed2f) [0x7fbf521fcd2f] > Jul 28 09:18:51 midway3-dm1.rcc.local winbindd[1056745]:??? #17

Would you consider the following patch to eval.c to allow compatibility with RCC? (It's in the applyClosure function.) @@ -432,6 +432,14 @@ SEXP f, a, tmp; RCNTXT cntxt; +#ifdef RCC + SEXP comp; + PROTECT(comp = getAttrib(op, install("RCC_CompiledSymbol"))); + if (comp != R_NilValue) /* compiled version exists */ + op = comp; + UNPROTECT(1); +#endif

I''m new on this mailing list, reading it for last 4 weeks, ... Need help please... I want to implement tc rules on br0 witch is build of wlan0, wlan0wds0, wlan0wds1? I did something but it doesn''t do good job, it doesn''t give constant flow ... any idea, please if someone already have experiance... OS: Suse 9.0 myshaper

Hi Experts, We encountered a weird issue after restarting the server. Seems everything working fine on the configuration side but the user?s not able to authenticate with the Samba server. Can you please help to investigate the issue? Our setup details and configuration file + error logs + service status. Samba:- 4.18.3-0 CentOS Linux release 8.4.2105 Authentication mechanism is SSSD [root at

Any error in your host logs? On Sunday, 30 October 2016, Steven Tardy <sjt5atra at gmail.com> wrote: > > > On Oct 30, 2016, at 3:27 AM, Paul R. Ganci <ganci at nurdog.com > <javascript:;>> wrote: > > > > grub> set root=(hd0,msdos2) > > grub> linux (hd0,1)/vmlinuz-3.10.0-327.36.2.el7.x86_64 > root=(hd0,msdos2)/ > > grub> initrd

Dear memberships, I'm trying to estimate the following multivariate local regression model using the "locfit" package: BMI=m1(RCC)+m2(WCC) where (m1) and (m2) are unknown smooth functions. My problem is that once I get the regression done I cannot get the fitted values of each of this smooth functions (m1) and (m2). What I write is the following library(locfit) data(ais)

A few years ago, one of our interns was curious about system time keeping features in computer systems.? This intern was also the proud owner of an inexpensive Radio-Controlled Clock. The intern wondered why computer motherboards were not just equipped with a chip like the ones in the RCC so that their system time would always be correct. I posted a question about this on the CentOS email list

Hi I using ipp2p to block p2p traffic. How to enable to use p2p to me host in my net ? I using this setup: iptables -A FORWARD -m ipp2p --ipp2p --bit --apple --winmx --soul --ares -j DROP This setup: iptables -A FORWARD -m ipp2p --ipp2p --bit --apple --winmx --soul --ares -d ! mynet -j DROP iptables -A FORWARD -m ipp2p --ipp2p --bit --apple --winmx --soul --ares -s ! mynet -j DROP not

I just released the version 0.8 of the GPL''s rcc-project (http://www.rcc-project.net). This project has an client/server (the RCC server can be install where you want, only the client has QoS fonctionalities) architecture that permit to manage many differents coputer in the same time thanks to the remote GTK GUI. We need dome feedback to help the project, so if you ever use it, it will be

Hi all, I have just upgraded to a new satellite internet provider. I have two network cards - one with a public IP connected to my satellite router, and the second network card with private IP into my switch for the LAN. Shorewall firewall My old satellite system is not being used. Would it be possible/feasable to install a third network card into my Fedora Core 2 server, and then direct all

After varying degrees of success with p2p detection modules, I would like to write the following rules using iptables to reliably identify p2p traffic: 1. If a host on the network has 5 or more simutaneous tcp connections to ports above 1024, mark all connections to ports 1024 and above as 60. 2. If a host has received (or sent) UDP packets from 5 different hosts'' ports above 1024 in a

Hello, Is there a way to route p2p traffic on a separate ISP connection, just as you would choose a separate connection for http traffic? I tried all sorts of setups based on: http://www.braindump.dk/en/wiki/?wikipage=PolicyRouting but with no luck. Please help :) (ipp2p is up and running) _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl

Hi, I''ve a linux as router nat + firewall (POLICY DROP for INPUT OUTPUT and FORWARD) but, I''ve put next rules for p2p software on FORWARD chain [... snip ... ] iptables -F FORWARD iptables -P FORWARD DROP iptables -A FORWARD -p tcp --dport 80 -j ACCEPT iptables -A FORWARD -p tcp --dport 25 -j ACCEPT [... snip ... ] iptables -A FORWARD -m ipp2p --ipp2p -j ACCEPT iptables -A

Hi libvirt support, Can you please give me some example of how to use "virsh migrate --live" with p2p option including both source host and target host? I try to get some info from your website, but no info with migrate. [root at vmoactive02 qemu]# virsh help migrate NAME migrate - migrate domain to another host SYNOPSIS migrate [--live] [--p2p] [--direct]

Greetings, I''ve searched, found ftwall, and some other commercial solutions, but am wondering if anyone on this list has any solutions using a linux firewall to block p2p traffic, more specifically Kazaa. Walter Wickersham _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/