similar to: Please: Judge this script

I copied and tried to adapt to my necessities the excellent script of Pedro Larroy, but I am inexperienced in QoS and I have doubts. I have cablemodem to Internet 1024kbit down and 256kbit up, through eth0. The LAN has eth1 and NAT. I formed the band so that shaping goes by the eth1 (of the LAN) with bandwidth maximum CEIL=768. But I observe that the traffic sometimes accelerates and other

Hello all, I am trying to configure a linux box to make some QoS into my netowork and, at the same box, control my clients bandwidth. I have this classes created: ---------------------------------------------------------------- UP="eth0" # wan infocontabil DL01="eth2" # lan clientes $TC qdisc del dev $DL01 root 2> /dev/null >

Hi there, i tried to setup up a Linuxbridge for prioritize some interactive (Citrix / https) Traffic to 1.2.3.4 on my ADSL Link, but i think it work not correct. Overview: Router <->Linux Bridge<->internal Net eth1 eth0 This is my Script (with friendly support from the Linux Advanced Routing & Traffic control Howto) #!/bin/sh # # ADSL

Hello...I have a Slackware based machine doing routing & QoS for my internal LAN users... It has two interfaces: eth1(100mbps) that connects to the aDSL modem(USR 9105) and eth0(100mbps) that connects to my local LAN... I''am using shorewall as a firewall...i think it''s configured well as it''s working as i want and i pass all the online firewall tests... :D All lan

Dear All I am a newbie to traffic control and i am trying to setup bandwidth restriction in my local network as well as internet access to users. I got around 60 pcs in my lab and i am planning to divide bandwidth based on classes. I am using iptables to mark packets and then route the traffic to the specified class. Following is the network setup Two network cards in the server eth0

Hi, I''m having issues with policing my incoming traffic by matching packet marks made by iptables. I''ve checked as many sites and guides as I can find, and I seem to be doing the exact same thing as they all are, but there''s still no success. As such, I was wondering if anyone can have a quick look to see if I''ve done anything obviously stupid? Essentially, I

Hello lartc maintainers and users! I have a router with two NICs. One NIC is connected to the Internet and the other to my internal LAN. I made a script for priorizing interactive traffic. The script matches TOS Minimize-Delay for priorizing interactive trafic, and fwmark for metropolitan packets. I have two root classes (simulating two circuits) : 1:1 for internet and 1:3 for metropolitan.

Hi, with the attached config my gaming ping is still +20ms, even if the line isn''t saturated..can anybody give me a hint how to get a better response time? my line: 1024/128kbit outbound: one htb qdisc for gaming (7kbps) prio 0 ceil 14kbps<- should get more traffic when needed. Htb again for irc and default. inbound: css, irc, p2p, default <- same shema as before, give css

Hi, I have a router/firewall running Linux (like the most of you) and I wanted to do some traffic control. I''ve created an root PRIO qdisc like the example in paragraph 9.5.3.1 (http://www.lartc.org/howto/lartc.qdisc.classful.html#AEN903) with three SFQ child-classes. I wanted for interactive (ssh, telnet, ftp-control) and dns-traffic to be placed in the first queue, http should go in

Hello to all people there . Can i guarantee ICMP respond time no metter how loaded is internet line . i have typical NATed enviroiment like External IP |linux router| LAN - 192.168.0.0/24 i have example setup with IMQ but is it possible to be done also if i attache htb to eth0 and eth1 for example . if i start shaper ping i better that without shaper but it''s not guarantted i mean

(list admin, please cancel the same post from my other email address -- forgot to change it on first submission) I need to setup QoS on a linux router/firewall I maintain. I spent 10 hours reading everything I could find on QoS/HTB/iproute2 and came up with what I thought made sense for my situation. So I deployed it and BOOM! KERNEL PANIC! Not what I was expecting... now the debugging begins.

HI all I just came across one of the threads on the LARTC. In the thread it had this. So my question is, for the following rules, would these increase my browsing / traffic, and if so, how. iptables -t mangle -A PREROUTING -p tcp -m tcp --tcp-flags SYN,RST,ACK ACK -m length --length 0:128 -j TOS --set-tos Minimize-Delay iptables -t mangle -A PREROUTING -p tcp -m tcp --tcp-flags SYN,RST,ACK ACK

#!/bin/sh PPP=(ppp0 ppp1) IP=(`ifconfig ${PPP[0]}|sed -n 2p|column -s ":" -t|awk ''{print $3}''` `ifconfig ${PPP[1]}|sed -n 2p|column -s ":" -t|awk ''{print $3}''`) GATEWAY=(`ifconfig ${PPP[0]}|sed -n 2p|column -s ":" -t|awk ''{print $5}''` `ifconfig ${PPP[1]}|sed -n 2p|column -s ":" -t|awk ''{print

Hi, I''ve read ADSL-Bandwidth-Management-HOWTO http://www.tldp.org/HOWTO/ADSL-Bandwidth-Management-HOWTO/implementation.htm l#AEN166 and I''ve a doubt from script: [ ... ] # DNS name resolution (small packets) iptables -t mangle -A MYSHAPER-OUT -p udp -j MARK --set-mark 21 [ ... ] That is a bug ? I think that " DNS name resolution (small packets) " is better

Hi I have the following problem: I''ve created qos script which shapes traffic on outgoing interface eth1. More - less it looks like this : ------------------------CUT------------------------------------------------------ #root qdisc and class for eth1 $tc qdisc add dev eth1 root handle 1:0 htb default 19 $tc class add dev eth1 parent 1:0 classid 1:1 htp ratel ${CEIL_UP}kbit ceil

i''m using one line on eth2 only for web traffic eth1 is my internal line and eth0 is my main line to internet . i''m marking packets like this i have default route on eth0 iptables -t mangle -A PREROUTING -i eth1 -p tcp --dport 80 -j MARK --set-mark 66 iptables -t mangle -A PREROUTING -i eth1 -p tcp --sport 80 -j MARK --set-mark 66 iptables -t mangle -A PREROUTING -i eth1

Hi all, my IMQ device works OK (thanks to Andy Furniss), but now I''ve problems to attach the traffic in the qdisc''s. This is my conf: ----------------------------------------------------------------------- INET | |eth0 300Kbps ROUTER (NAT) |eth1 | LAN ----------------------------------------------------------------------- MAX=300 tc qdisc add dev imq0 root handle 1: htb

i''ve read your http://lartc.org/howto/lartc.rpdb.multiple-links.html article as well as Advanced IP Routing (esp. chapter 10.4) and still unable to make this thing work. am i that helpless? :) is there anyone to guide me through the multiple ISP setup? into details. i got 2 dsl connections from different ISPs (A and B), both connections use PPPoE, both got assigned with dynamic IPs

Hi All I am fighting this for 3 days and could not find any reason it is not working the way I want to (or I the way think it should). Internet output interface = eth2 (htb qdisc) Internet input interface = imq0 (eth2 attached - htb qdisc) main class = imq0 1:1 sub1 = 1:ffff (default) sub2 = 1:10 (src ports 1433/tcp or 1434/tcp or 81/tcp or 82/tcp) sub3 = 1:11 (src and dst port 25/tcp )

https://bugzilla.netfilter.org/bugzilla/show_bug.cgi?id=498 Summary: RTP packets are not hitting NAT table Product: netfilter/iptables Version: linux-2.6.x Platform: All OS/Version: Fedora Status: NEW Severity: major Priority: P2 Component: NAT AssignedTo: laforge@netfilter.org ReportedBy: