similar to: [OpenSIPS-Users] 404 When BYE initiated by external callee

Hello Everyone, I have gone through a few really good tutorials from the OpenSIPS site, Asterisk resources etc.. The unanswered question (and final piece of our puzzle) is if it's possible to have a register free environment in an OpenSIPS/Asterisk integration. Most approaches have OpenSIPS relay the UA's REGISTER request to Asterisk which has "host=dynamic" set for the

hello i am trying to set up ipsec in my network, for now just between two hosts, using to use AH & ESP in tunnel mode to get all of packet encrypted. keys are negotiated with racoon. mayby using tunnel mode in this case can seems strange, but i know what i am doing. after setting up everything i have done few tests with ping & tcpdump. but the results are very suprising. bellow is what i

Hi all, I have two servers ZEUS (MASTER - 192.168.2.11) and POSEIDON (SLAVE - 192.168.2.12) with HeartBeat+DRBD+SAMBA installed ; HeartBeat is controlling SAMBA. I have a big partition which are mirrored /share. I moved all important directory on it. For example: # mv /var/lib/samba /share/cluster/varlibsamba # mv /var/cache/samba /share/cluster/varcachesamba and I make a link for each one: # ln

i'm trying to use samba 3 (3.0.2rc1) on openbsd 3.4-stable (i386) i correct some erros in configure.in (see attached patch), but, as before, i'm falling in an "INTERNAL ERROR" # /opt/samba3/sbin/smbd -i -S -d=3 get_current_groups: user is in 7 groups: 0, 2, 3, 4, 5, 20, 31 smbd version 3.0.2rc1 started. Copyright Andrew Tridgell and the Samba Team 1992-2004 uid=0 gid=0 euid=0

I've just upgraded to 1.0a3 via a freebsd port, and I've begun to notice odd behaviour from Dovecot. After converting my config file settings over to the new format, everything runs fine for an hour or so, then dovecot stops responding: oot at toejamfootball# telnet localhost 143 Trying ::1... telnet: connect to address ::1: Connection refused Trying 127.0.0.1... Connected to localhost.

Hi, the new function ''shorewall show zones'' in 2.2.0-Beta showed a thing which is (in my view) either abug or not documented. If I have a line in /etc/shorewall/hosts which reads work br0:eth0:192.168.2.10,192.168.2.11,192.168.2.12 then "show zones" has the output work br0:eth0:192.168.2.10 br0:192.168.2.11 br0:192.168.2.12 That is, the

Apologies if this is a repeat: I trawled through the archives and couldn't find a reasonable answer, so I'm asking here. I have an Asterisk install connecting from behind a NAT device (DSL modem) to a SIP proxy (in my case, Broadvoice). I have an sjphone softphone on a Windows PC also behind the NAT device that connects to the Asterisk install, and using this setup I've been pretty

I've been getting a lot of these recently in my samba-log ever since I downloaded the latest cvs SAMBA_2_0 branch code. Mar 6 18:13:06 gate smbd[11126]: cos5 (192.168.7.132) connect to service rsession as user rsession (uid=707, gid=100) (pid 11126) Mar 6 18:13:15 gate smbd[11126]: [2000/03/06 18:13:15, 0] lib/fault.c:fault_report(40) Mar 6 18:13:15 gate smbd[11126]:

. "Saluton", Sorry by my poor english, I speak Portuguese. I does a captive portal using: - shorewall - dhcpd - thttpd (in port 8080) - maradns With Shorewall I use dinamic zones. The initial zone in shorewall is configured to redirects access to internal thttpd port 8080, that shows a login.cgi page. With thttpd I rewrite original url. The apache rewrite is very cool, but thttpd

Hi, My local server is running CentOS 7. The machine has two NICs and is acting as a gateway. For DHCP and DNS, I'm using Dnsmasq. I have a strange little problem with local hostname resolution. Before going into more details, here's my configuration. [root at nestor:~] # ifconfig enp2s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.0.2 netmask

Hello, I am facing some problems in bridged networking. I have successfully created a bridge br0 and added a virtual machine to it. Now the address of virtual machine is 10.1.3.31. I am able to connect to this virtual machine by another computer on same network. The virtual machine is hosting a simple python http server on port 8000, while some other service is running on port 80 When I try

Currently I have a RH6.1 host with selinux enabled On this I am running a LXC container with ubuntu (without selinux) with OpenSSH_5.3p1 Debian-3ubuntu4, OpenSSL 0.9.8k 25 Mar 2009 when I try to do a ssh connection to the lxc container I get : ... debug1: Next authentication method: password root at 192.168.2.11's password: debug1: Authentication succeeded (password). debug1: channel 0: new

Hi guys I've been running Samba 3 for a while as my PDC in our office with a number of XP clients and a MacOS 10 client, without undue problems. Recently, though, we upgraded a couple of workstations to 64bit and these two workstations now have problems getting up the user dialog that 32bit XP has no problem with. When you select a folder, go to it's security options and hit

This one is a bit complex so if no help is forthcoming, I understand. I have 2 shorewall firewalls (1.3.13) up and running. (both machines running Gentoo Linux 1.4_rc2) I have freeswan (1.98) running on each of them. I have squid setup as a caching/filtering server on each of them. Each of them was originally setup using the Two-interface Quick Start Guide. Then the Squid guide and then the IPSEC

I'm trying to set up a new server to replace my previous domain controller/file&print server on my home network. My old server was running Debian/Etch on a 32bit sempron system with two HDs. The new one is running an old 64bit single-core processor and 3 HDs configured into multiple RAID 1 and 5 arrays (/boot as RAID 1 and /, /home, swap and a /backup directory as RAID 5). The new server

Hi, ppl, I am using kernel 2.4.25 and having this peculiar problem on my ixp425. When i have 2 ethernet ports of the board connected to the same linksys switch running STP. ixp0 and ixp1 are the name of my ethernet ports enslaved to the same bridge( br0)and my PC is also connected to the switch. IXP425 -br0 (192.168.2.1) |_ixp0|--- |

So I am attempting to add a 2nd vpn to my existing setup and for some reason I can't seem to get it to work quite right. The issue I'm having right now is successful execution of the tinc-up script. It's probably something obvious but after several days I still don't see what I'm missing. I can see in syslog that "Script tinc-up exited with non-zero status 1" Both

192.168.1.11 was from a time we tried to increase the number of available IP's by adding a virtual IP in Zentyal for the server to listen on. It never worked and now Zentyal won't let me remove it, due to not being able to save changes. We do use .local because Microsoft small business server, which we were playing with before we started down this route automatically suggested we use the

Hi, not sure if this is considered news, but I have been able to build OpenSSH 5.8p2 on mips-dec-ultrix4.5. On my system I have ULTRIX 4.5 with the latest Y2K patch kit as well as zlib-1.2.5, openssl-0.9.8m and prngd-0.9.29, several GNU utilities and gcc-3.0.4. To build openssh one has to check in various files if <sys/socket.h> and/or <netinet/ip.h> are multiply defined, because of

I just got a Cisco 7940G phone running SIP firmware version POS3-06-1-00. I unlocked the phone's config, and using the soft keys, I entered the SIP Configuration menu and keyed in values for Name, Auth. Name, ProxyAddress (where I gave my Asterisk server's IP address), etc. The result is that I can make outgoing calls from this phone just fine through my Asterisk server, but I cannot call