similar to: DTMF Blips at end of Record() - 1.8.18

Carlos and Stefan (and other who have helped): I DON'T HAVE the res_timing_timerfd.so file. Can I build it? Recompiling Asterisk is unrealistic in my position but I wonder if I can build the one module. Here's what I do have: apbx:~ $ locate *res_timing_timerfd* /usr/src/asterisk-1.8.23.1/res/.res_timing_timerfd.makeopts /usr/src/asterisk-1.8.23.1/res/.res_timing_timerfd.moduleinfo

>Information on timing sources can be found here: >https://wiki.asterisk.org/wiki/display/AST/Timing+Interfaces >As noted on that page, ConfBridge can use any timing interface Asterisk >provides, and is not limited to the DAHDI timing interface. Generally, >timerfd is a good timing interface. >That aside, I would try to rule out external issues with the garbled audio

On 1/14/19 4:02 PM, Duncan Turnbull wrote: > > > Sent from my iPad > > On 15/01/2019, at 10:34 AM, Thomas Peters <TPeters at mcts.org > <mailto:TPeters at mcts.org>> wrote: > >> Duncan: >> >> You may have it right—I took one phone and set the ring time to 60 >> seconds. I now get about 4 rings on that one. >> >> I wonder how I

hi: my current system is 1.6.2. I have dahdi hardware card. I must disable res_timing_timerfd module or sometimes phone calls would become silent suddenly. I don't know the situation in 1.8. I heard that timing is still a problem in 1.8. should I keep using "res_timing_dahdi" or I can use "res_timing_timerfd" to get some benefit if I upgrade to 1.8? thank a lot for

Hi! I have Asterisk 1.6.1 installed on OpenSuSE 11.0 running with choppy sound. One specialist on the forums asked me if I have DAHDI configured, he assumed that this could be cause of choppy sound problem. > dahdi_test Unable to open dahdi interface: No such file or directory Do I need to configure DAHDI even if I do not have any Zaptel devices? Is there any guide for configuring

Folks, I've read some sources claiming that Asterisk does not need DAHDI for timing in 1.6.1. Is this true? Searching the web, all I can find is pages celebrating the fact but no actual documentation on which version it was introduced in and how one would go about configuring an external time source. I'm having a devil of a job trying to compile DAHDI on a hosted Xen VM and thought I

Strange issue.... when I record a file from a phone to the asterisk system I get a blip in the recording every 30 seconds. It's a very small blip, but it is there. It seems like it's only if I'm recording, not when I'm playing back that the issue happens. My SATA drives, ETH0, and my Sangoma card are all on seperate IRQs. Any thoughts on what might be causing this and how to

Hi Gang, My production box with my DAHDI cards is a 1.4.26 build. I have 3 test machines that I do IAX communication with. Machine 1 is a real Dell POWEREDGE 1500 running CENTOS running 1.4.30. Machine 2 is a SUSE 11.1 VM running 1.4.30. Machine 3 is another SUSE 11.1 VM running 1.8.0. I can SIP into all 4 machines and life is great. When I try to IAX from the live machine to

Hi all I am using asterisk 11.24.1 on a centos 5 machine. kernel 2.6.18 flavor. (x86_64). I have about SIP 150 endpoints on it. when I send a message I'm getting garbled audio. I used to have a single PRI card in the box - but something happened and that connection no longer worked. I removed the card and also removed the system.conf and chan_dahdi entries. I am using ConfBridge in a PA

Hi, I have an IVR that sounds just fine and dandy over ZAP. However, when I dial in through an 800 number from a provider that I connect to via IAX I get this 'blip' in the sound file. At first I thought it was just packet loss, but it happens at the exact same spot every single time. There are several parts to the IVR menu and several places where this blip happens every single time

https://blip.tv/opensuse/episode-5622859 Does anyone have the right tools to extract this video? I refuse to use flash over here, and as it's not on youtube I can't use youtube-dl. Rich. -- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones virt-p2v converts physical machines to virtual machines. Boot with a live CD or over the network (PXE) and turn

starting 161.1-beta3: chan_iax2.c:10925 build_user: Unable to support trunking on user 'iax-out' without DAHDI timing But I have these "timing" modules: ls /usr/lib/asterisk/modules/res_tim* /usr/lib/asterisk/modules/res_timing_dahdi.so /usr/lib/asterisk/modules/res_timing_pthread.so Do I need to do some magic to get these loaded? modules.conf is set to auto. Is this what

Hi all Sometimes (about every three months) some of my Asterisk 1.8 boxes will start running this message thousands of times in the CLI: [Feb 12 14:18:23] ERROR[28129]: res_timing_timerfd.c:180 timerfd_timer_ack: Call to timerfd_gettime() error: Invalid argument [Feb 12 14:18:23] ERROR[28129]: res_timing_timerfd.c:180 timerfd_timer_ack: Call to timerfd_gettime() error: Invalid argument [Feb 12

We are receiving multiple audio drop outs on calls .. I've done quite a bit of troubleshooting and it only involves calls that require the Dial(SIP/xxx,,t) for transfers.. as long as the media path goes through the server the audio blips happen.. using ulaw codec, btw. I have been able to align the blips in audio to a specific point involving asterisk.. it seems to happen right at about

Hi, Here is a patch to update documentation to Doxygen 1.8.18 as the navbar is broken trying to use the latest Doxygen. Also seems we are missing documentation for last releases here: https://www.opus-codec.org/docs/ Best Regards Marcus -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hy guys i am having so much hard time to setup asterisk on a virtual machine that i got , i just want to know if i really need to use Dahdi and libpri on a complete Digital PBX i just gonna use sip and iax. I will never use any kind of analog line on this machine. Wait for a feed back. Daniel Abreu.

Hi, I remember seeing a T38 Gateway application for Asterisk 1.6 floating around, but I can't seem to find it again. Does anyone have any pointers to it? I really want to be able to send an incoming T38 connection directly to the PSTN. Thanks. -- James

Duncan: You may have it right-I took one phone and set the ring time to 60 seconds. I now get about 4 rings on that one. I wonder how I can change the timing source. Thomas M. Peters | Sr. Systems Administrator | tpeters at mcts.org<mailto:tpeters at mcts.org> Desk: 414.343.1720 | Helpdesk: x3400 or helpdesk at mcts.org<mailto:helpdesk at mcts.org> Milwaukee County Transit System

1. Subject. 2. asterisk16-1.6.2.6-1_centos5.src.rpm have not asterisk.logrotate in SOURCES 3. for "--without dahdi" diff SPECS/asterisk16-my.spec SPECS/asterisk16.spec 750a750 > %{_libdir}/asterisk/modules/res_timing_dahdi.so 879d878 < %{_libdir}/asterisk/modules/res_timing_dahdi.so

http://bugs.freedesktop.org/show_bug.cgi?id=16546 Summary: Blip.tv does not work as expected :) Product: swfdec Version: 0.7.x Platform: x86 (IA32) URL: http://polygamia.pl/prezentacja-life-with-playstation OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: