similar to: Re: CentOS-5.0-x86_64-bin-DVD-ich9.iso.delta md5 mismatch

btw - I installed your x86_64 rpms that has the ich9 patch directly on that box but it still will not boot without all the options. --- Michael Rock <mikerocks65 at yahoo.com> wrote: > > David wrote: > > Now there are right md5sums and even > > x86_64 iso.delta. > > David > > I tried using applydeltaiso and it creates a 2gb ISO > but I notice it fails on

> David wrote: > Now there are right md5sums and even > x86_64 iso.delta. > David I tried using applydeltaiso and it creates a 2gb ISO but I notice it fails on applying. kdnssd-avahi-devel.i386: copying unchanged payload kernel-xen.x86_64 (???): applying delta new payload open failed __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has

Michael Rock napsal(a): > all-generic-ide irqpoll > > Without irqpoll it just hangs and without > all-generic-ide it get a kernel panic. So I still > need both to recognize the disk and continue booting. > Michael, > I have tested 8.1.14 ICH9 x86_64 version and it's kring fine. For sure > im right now uploading full DVD isos. I did not want to :o( due due to >

Hi all, I've the same problem, I've download the CentOS-5.0-x86_64-bin-DVD.iso from one centos mirror, i've applied deltaiso and the created image is 2 GB, the md5sum check of iso.delta (CentOS-5.0-x86_64-bin-DVD-ich9.iso.delta) is ok, what's wrong ? deltaiso program exit on the same as Michael , maybe I've downloaded the worng DVD 64 bit iso version? do you know any good

Hi, full ICH9 support for Centos 5 can be found http://fs12.vsb.cz/hrb33/pub/ Take it as a workaround until CentOS 5.1 is released. I hope ICH9 to be included in this version. Support is done by backporting from new kernel versions. Delta file is created with mkdeltaiso from CentOS-5.0-i386-bin-DVD.iso, so full image can be created with applydeltaiso. Regards, David Hrb??

David wrote: >I'll test DVD tomorrow. Today new kernel RPMS are > being built. What ptions are you talking about? > David all-generic-ide irqpoll Without irqpoll it just hangs and without all-generic-ide it get a kernel panic. So I still need both to recognize the disk and continue booting. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo!

> WELCOME TO MY WORLD :D > (Hey, are the new foobar packages done, how about the xwyz packages) > Thanks, > JOhnny Hughes When you snip the rest of my post man that last request sounds really bad on its own. Sorry guys. I saw the "uploading the new DVD's" a few days ago and thought I would ask. I really do not want to put anyone out and please do not go through any

Oops sorry, ugh another poor selection of words as I meant to say "When I saw the rest of my post snipped, I then realized that last request sounds really bad, which was not my intention. > When you snip the rest of my post man that last > request sounds really bad on its own. Sorry guys. I > saw the "uploading the new DVD's" a few days ago and > thought I would

Hi All, I found it very difficult to get Xen-3.1 up on a a machine with Intel''s ICH9 family of disk controllers :-(. Is the ICH9 support really there in xen-3.2 ? I tried but was not successful in booting even xen-3.2 from xen.org. Did anyone have a success? Or any help on what extra config options I need to pass while compiling a domain0 from xen sources? Thanks, -- Pradeep Singh

Hi, Well, ICH9 support for CentOS as announced on Oct 16th by me http://lists.centos.org/pipermail/centos/2007-October/088104.html has been extended. Today I have published x86_64 install DVD. You can find it here: http://fs12.vsb.cz/hrb33/pub/ich9/ Regards, David Hrb??

How does one do this? For example: # lspci | grep USB 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9

Hello, In real life I use xen 3.3.1 successfully on servers Fujitsu-Siemens RX100. Now I to see how working xen-3.4-rc3 on the same server, but unfortunately is a problem with loading a module to handle the disk (mptsas) . I use debian lenny 5.0.1 and kernel version 2.6.26-2-xen-686. Someone managed to compile 3.4 xen kernel with this version? xen:~# lspci 00:00.0 Host bridge: Intel

Hi, I using on all server (FSC RX100S5) xen 3.3.1 and kernel 2.6.26-1 or 2.6.26-2,evrything it works good. Now I try using xen 3.4.0 with the same kernel but the system not up only go to the initramfs. I suspect that the kernel did not load the driver for the controller. The question just why it works on a Xen 3.3.1 does not work on 3.4 with the same versions of the kernel . Below I put

Hello, I am installing dahdi on a machine lspci 00:00.0 Host bridge: Intel Corporation 3200/3210 Chipset DRAM Controller (rev 01) 00:01.0 PCI bridge: Intel Corporation 3200/3210 Chipset Host-Primary PCI Express Bridge (rev 01) 00:06.0 PCI bridge: Intel Corporation 3210 Chipset Host-Secondary PCI Express Bridge (rev 01) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI

https://bugs.freedesktop.org/show_bug.cgi?id=109613 Bug ID: 109613 Summary: nouveau: KMS is broken on last kernels (9700M GT) Product: xorg Version: unspecified Hardware: x86-64 (AMD64) OS: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/nouveau

I have one HP Proliant DL320 G5p, where for some reason, the AHCI mode is not enabled. According to server specs, it should have AHCI/NCQ capability, but ata_piix module gets loaded during bootup, not ahci module. Any ideas how to enable AHCI mode? lspci output: # lspci 00:00.0 Host bridge: Intel Corporation 3200/3210 Chipset DRAM Controller (rev 01) 00:01.0 PCI bridge: Intel Corporation

Hello, My "hardware" (?) RAID system seems to work but says "duplicate PV" while booting, I don't think I was reading them before. Any clues will be appreciated. >From what I recall: 1) RAID 1 was setup (using firmware setup program) on a machine with Intel S3200 SHV Server Board. 2) Installed Centos 5.1, default LVM style. Anaconda saw a single 500GB disk so I assumed

Hi, I sill need some help. I tried to remove cdrom and USB controllers from qemu xml definition file. It doesn't help. Still same Failed to create chardev when trying to run a Vms that run on my local Fedora 20 computer. Any idea? Thanks Patrick Le 15/06/2014 11:57, Patrick Chemla a écrit : > > Sorry for posting bad debug info. > > Here are the right one with the chardev

I am trying to connect a KVM-QEMU VM to OVS-DPDK vhostuser port. But, I am encountering a few errors. Since I am very new to libvrt and Linux I am not able to sort them out. Any guidance in this regard would be a great help. These are my System Logs: Mar 28 18:03:04 dpdk-OptiPlex-5040 libvirtd.service: 1529: debug : virCommandRunAsync:2429 : About to run LIBVIRT_LOG_OUTPUTS=3:stderr

On 12/10/18 1:24 PM, daggs wrote: > Greetings, > > I'm trying to add a virtual nic to an existing and active vm and I'm getting this error: > error: internal error: No more available PCI slots > > the cmd I'm trying to run is: virsh -c qemu:///system attach-interface --domain router --type bridge --source virbr0 --model virtio --config --live > > the lspci