similar to: NFS Performance

This may be in the documentation. If so, I missed it. If a site has multiple Lustre file systems, the documentation implies that there only needs to be a single MGS for an entire site (regardless of the number of file systems). However, I also know it is fairly common to have a combined MGS/MDT. So here are the questions. 1. If we are going to have several Lustre file systems,

Hi all, Here is the situation: I have 2 nodes MDS1 , MDS2 (10.0.0.22 , 10.0.0.23) I wish to use as failover MGS, active/active MDT with zfs. I have a jbod shelf with 12 disks, seen by both nodes as das (the shelf has 2 sas ports, connected to a sas hba on each node), and I am using lustre 2.4 on centos 6.4 x64 I have created 3 zfs pools: 1. mgs: # zpool

Hi, Our lustre environment is: 2.6.9-55.0.9.EL_lustre.1.6.3smp I would like to change recovery timeout from default value 250s to something longer I tried example from manual: set_timeout <secs> Sets the timeout (obd_timeout) for a server to wait before failing recovery. We performed that experiment on our test lustre installation with one OST. storage02 is our OSS [root at

Hi, Our environment is: 2.6.9-55.0.9.EL_lustre.1.6.3smp I am getting following errors from two OSS''s ... Nov 7 10:39:51 storage09.beowulf.cluster kernel: LustreError: 23045:0:(client.c:519:ptlrpc_import_delay_req()) @@@ IMP_INVALID req at 00000100b410be00 x4190687/t0 o101->MGS at MGC10.143.245.201@tcp_0:26 lens 232/240 ref 1 fl Rpc:/0/0 rc 0/0 Nov 7 10:39:51

Hi, I would like to know what TCP/UDP ports should i keep open in my firewall policies on my MGS server such that I can have my MGS server fire-walled. Also if in a event of loss of MGT would it be possible to recreate the MGT without loosing data or bringing the filesystem down (i.e. by using cached information from MDT''s and OST''s) Thanks Anand

On 4/8/06, Dmitry Morozovsky <marck@rinet.ru> wrote: > On Fri, 7 Apr 2006, Mars G. Miro wrote: > > MGM> Greetz! > MGM> > MGM> I have an HP DL145 that I'm having problems with when connecting via > MGM> serial console. I think it's acpi-related. This is on 6.1-BETA4/amd64 > MGM> (5.X is the same also) > > [snip] > > It seems it's

Hi , I am facing a strange problem .I am unable to install CentOS 4.0 on my HP DL145 G2 Server .I am getting the following error RAMDISK: couldn't find valid RAM disk image starting at 0. Please append correct "root=" boot option VFS: cannot open root device "<NULL>" or unknown-block (3,3) Kernal panic - not syncing VFS unable to mount root fs however CentOS 3.5

I have 11 possible predictor variables and use them to model quite a few target variables. In search for a consistent manner and possibly non-manual manner to identify the significant predictor vars out of the eleven I thought the option "select=T" might do. Example: (here only 4 pedictors) first is vanilla with "select=F" >

Chris, Perhaps you need to perform some write_conf like command. I''m not sure if this is needed in 1.6 or not. Shane ----- Original Message ----- From: lustre-discuss-bounces at lists.lustre.org <lustre-discuss-bounces at lists.lustre.org> To: lustre-discuss <lustre-discuss at lists.lustre.org> Sent: Fri Mar 07 12:03:17 2008 Subject: Re: [Lustre-discuss] Multihomed

Greetings! I am working with Lustre-2.1.2 on RHEL 6.2. First I configured it using the standard defaults over TCP/IP. Everything worked very nicely usnig a real, static --mgsnode=a.b.c.x value which was the actual IP of the MGS/MDS system1 node. I am now trying to integrate it with Pacemaker-1.1.7. I believe I have most of the set-up completed with a particular exception. The "lctl

In 1.6.0, when creating a MDT, you could specify multiple --mgsnode options and it would failover between them. 1.6.3 only seems to take the last one and --mgsnode=192.168.1.252 at o2ib:192.168.1.253 at o2ib doesn''t seem to failover to the other node. Any ideas how to get around this? Robert Robert LeBlanc College of Life Sciences Computer Support Brigham Young University leblanc at

Any recommendation about the sequence to umount multiple lustre file system with combined MGS/MDT or separate MGS, MDT. Thanks. Ming -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.lustre.org/pipermail/lustre-discuss/attachments/20100909/396905b5/attachment.html

OK, so our old MDS had hardware issues so I configured a new MGS / MDS on a VM (this is a backup lustre filesystem and I wanted to separate the MGS / MDS from OSS of the previous), and then did this: For example: mount -t ldiskfs /dev/old /mnt/ost_old mount -t ldiskfs /dev/new /mnt/ost_new rsync -aSv /mnt/ost_old/ /mnt/ost_new # note trailing slash on ost_old/ If you are unable to connect both

I''m seeing this error message on one of my OSS''s but not the other three. Any idea what is causing it? Oct 25 13:58:56 oss2 kernel: LustreError: 3228:0:(client.c:519:ptlrpc_import_delay_req()) @@@ IMP_INVALID req at f6b13200 x18040/t0 o101->MGS at MGC192.168.0.200@tcp_0:26 lens 176/184 ref 1 fl Rpc:/0/0 rc 0/0 Oct 25 13:58:56 oss2 kernel: LustreError:

I am running on CentOS 5 distribution without adding any updates from CentOS. I am using the lustre 1.6.4.1 kernel and software. I have two NICs that run though different switches. I have the lustre options in my modprobe.conf to look like this: options lnet networks=tcp0(eth1,eth0) My MGS seems to be only listening on the first interface however. When I try and ping the 1st interface (eth1)

Hello, I have been reading http://wiki.lustre.org/images/1/1b/Hadoop_wp_v0.4.2.pdf for setting up Hadoop over lustre. Generally in hadoop setup, we have 1 Namenode and various number of datanodes. If I want to setup the same keeping Lustre as backend, in the document it is mentioned that: ".............Our experiments run on cluster with 8 nodes in total, one is mds/namenode, the rest are

Hi all, I have two HP DL145 G1 machines, running centos4 (2.6.9-22.0.2.ELsmp). Nics are recognized as: eth0: Tigon3 [partno(BCM95704) rev 2002 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:00:1a:19:f1:05 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap [1] eth1: Tigon3 [partno(BCM95704) rev 2002 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet

I just installed attachment_fu and for some reason, it seems to be looking in the wrong location for my images. I have a Product model that belongs to a photo model. the photo model has the attachment_fu installed and configured like so: class Photo < ActiveRecord::Base has_attachment :content_type => :image, #Allow standard image formats :path_prefix

I''ve got a DL145g3 which is reporting svm support in /proc/cpuinfo: processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 65 model name : Dual-Core AMD Opteron(tm) Processor 2214 HE stepping : 2 cpu MHz : 2200.000 cache size : 1024 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fpu

Hi all, I''m getting my feet wet in the infiniband lake and of course I run into some problems. It would seem I got the compilation part of sles11 kernel 2.6.27 + Lustre 1.8.3 + ofed 1.4.2 right, because it allows me to see and use the infiniband fabric, and because ko2iblnd loads without any complaints. In /etc/modprobe.d/lustre (this is a Debian system, hence this subdir of