similar to: OpenVswitch with KVM virtual machines

I am running NOX controller with a python script that prints out the destination mac and the source mac for each packet arriving at the now controller and then floods it out. So here's what happening: With em1 connected, all the packets that arrive at em1 are coming to the controller and printing out the details. However, without em1 connected to the OVS, when I have the following setup:

I am running Fedora 16 64bit and installed libvirt. I have the VM running with arm emulation with this one issue I can't figure out. I used Virtual Machine Manager to manage the VM and can access its console there. The Ethernet appears to be eth1 and the guest can set an IP on it etc. However, I cannot see any traffic from the Host when dumping any of the interfaces. I've tried

Hi all I have configured domain controler in debian 9 (samba 4.5.12-Debian). Dns is internal samba. locally works well (I think) but from another computer I can not query DNS. The problem is with samba_dnsupdate My configuration: smb.conf # Global parameters [global]     netbios name = DC     realm = BEWPHOTO.LOCAL     workgroup = BEWPHOTO     dns forwarder = 8.8.8.8     server role = active

Hello! How can i operate with openvswitch without root rights? For example - i can add my user to kvm group and create vm from libvirt with my own user, but now i'm failed with creating port. errors in logs: Mar 06 14:04:46 selfip.ru ovs-vsctl[19065]: ovs|00001|vsctl|INFO|Called as ovs-vsctl --timeout=5 -- --if-exists del-port Mar 06 14:04:46 selfip.ru ovs-vsctl[19065]:

Thanks for answers,but as I see libvirt call ovs-vsctl that tries to connect to ovs-vswitchd socket,that have rw to root.how can I specify socket permissions in vswitchd? On Thu, Mar 06, 2014 at 02:05:15PM +0400, Vasiliy Tolstov wrote: > Hello! How can i operate with openvswitch without root rights? > For example - i can add my user to kvm group and create vm from > libvirt with my own

On 05/13/16 20:04, Laine Stump wrote: > On 05/13/2016 09:57 AM, Richard Harman wrote: >> I've debugged this, and I think the interfaceid stuff in network XML >> isn't doing much besides setting a custom interfaceid in an OpenVSwitch >> table that really has no effect on the operation of OpenVSwitch. I >> think the -- set Interface vnet0

Hey folks, I'm working on setting up a Cuckoo sandbox malware lab at home, and can't seem to get openvswitch and libvirt to work together as-documented. I'm not subscribed to the list, so please reply-all. Thanks in advance! I've debugged this, and I think the interfaceid stuff in network XML isn't doing much besides setting a custom interfaceid in an OpenVSwitch table that

Hi, I have an existing OVS bridge, that I can see in ovs-vsctl and use for other purposes. I've edited the machine's XML as instructed in http://docs.openvswitch.org/en/latest/howto/libvirt/ When I try to start the VM, i get error: Cannot get interface MTU on 'ovsbr': No such device Any ideas? (Note: I can't see the ovs switch in brctl show or any other regular kernel tool,

I have installed OVS from sources using the installation steps mentioned on this link: http://docs.openvswitch.org/en/latest/intro/install/general/ I had installed libvrt, KVM, QEMU and all the necessary packages using apt-get. My KVM-QEMU hypervisor has been running well. To add a VM with the port attached to OVS bridge I changed the XML domain file as per the instructions on this page:

I keep getting an error when I try to attach a device in the libvirt api through python The python code is: conn=libvirt.open('qemu:///system') dom = conn.lookupByName("fedoratest") if dom.info()[0]==1: dom.attachDevice('net.xml') And I keep getting: "libvirtError: XML description not well formed or invalid The xml is a simple network

Hi all, When I created a virtual machine using virDomainCreateXML, with virtualport type was openvswitch, and virtual machine creation failed. The error message is: internal error: Child process (/sbin/tc filter add dev vnet110 parent ffff: protocol all u32 match u32 0 0 police rate 0kbps burst 0kb mtu 64kb drop flowid :1) unexpected exit status 2: RTNETLINK answers: Invalid argument The

With outbound QoS setting in Libvirt XML, libvirt will add a tc ingress qdisc for traffic shaping. Then if you set VLAN tag to that tap device, this qdisc will automatically gone by no reason. Could anyone shed some lights where should I look into? I'm really confused and got no clue here. Thanks! Steps to reproduce -- # virsh start instance-name # virsh dumpxml instance-name ...

Once upon a time, Lists <lists at benjamindsmith.com> said: > I understand that it's possible to allow the 4 VM guest systems to each have a > "direct" fixed IP address and access the addresses \via the host network > adapter, while the host retains its fixed IP. If you are running NetworkManager (the default), it's not too hard. Here's an example

Shorewall 4.5.15 3 Interface setup em1 p3p1 p4p4 ppp0 Hi, Since changing to NetworkManger on Fedora 18 I can no longer connect to the DSL Modem, which is connected to Interface em1. When the NetworkManger brings up the interfaces and ppp0, it no longer assigns an IP to em1. If I have ppp0 disabled and NetworkManger brings up the interfaces, em1 gets an IP of 192.168.1.2. Then when I get

hi all , i use ubuntu 12.04 with xcp , all config run very well except vlan i use xe network-create and xe vlan-create to build vlan 3000 then startup a vm in this network, xapi0 fakebridge and vif1.0 all looks well, use ovs-vsctl list port i can see xapi0 and vif1.0 have beed taged with 3000 but i can not access the internent~~~ somebody can help me with this? thanks.

Hello List, Merry Christmas to all !! Basically I''m trying to boot a Windows 2008R2 DC HVM with 90GB static max memory and 32GB static min. The node config is Dell M610 with X5660 and 96GB RAM and its running XCP 1.1 Many times the node crashes while booting HVM. Sometimes I get success. I have attached the HVM boot log of successful start. Many times the node hangs as soon as the

Hi everyone, I use KVM on Openstack Cloud. And KVM migrated successfull, but not ping. *Source Host SIDE: *"/var/log/libvirt/libvirtd.log" 2014-06-16 05:15:50.599+0000: 2096: warning : qemuMigrationCancelDriveMirror:1383 : Unable to stop block job on drive-virtio-disk0 2014-06-16 05:15:50.601+0000: 2096: *warning : qemuMigrationCancelDriveMirror:1383 : Unable to stop block job on

*Hello,* I have installed Xen as Hypervisor with OpenSUSE running in Dom0. I want to use ovswitch (ovs) instead of the bridges that Xen created. In order to do so, I installed ovs in dom0 just like for the plain Linux. Xen has replaced eth0 with peth0, and has created a bridge named eth0. And eth0 is connected peth0 interface , vif2.0 interface (VM), and everything is working fine. Now I delete

We just got DELL R920 and installed Centos 6.5 on it.? After installation, network not function.? We manually enter IP address, gateway and netmark on "em1".? we also do following: 1. startup NetworkManager 2. /etc/sysconfig/network-scripts/ifcfg-em1? ==> NM_CONTROOLED=yes I tried to startup network and get error message: Bring up interface em1: connection activation failed

Hello Everyone, I am new with XCP. I''ve setup several hosts with* XCP 1.0* and manage it through XenCenter and command console. Each host has two NICs, one (xenbr0) connected to a physical switch for Internet (said sw1), the other (xenbr3) connected to a physical switch for internal network (said sw2). I am trying to setup VMs and VLANs on xenbr3. I created a virtual bridge by