similar to: Default ICMP rate limiting changes from 5.4 to 6.x?

Hi! We have encountered a rather weird problem on a machine that we use for our network latency check (smokeping with fping). For an hour (or so) after boot it reports the ping time with a microsecond accuracy (ad it should). Then the millisecond accuracy starts. We have yet to identify the cause and the logs currently do not show anything. Please find an example of a good and a bad result

Hi everyone! For those of you who are not noticed the in-place edit method for collection associations are broken in the current rails release - 4.0.0, and here''s what is cooking in the rails master https://github.com/rails/rails/commit/1a40be02113287d9a003f8224e91b9f623857f4b and this https://github.com/rails/rails/pull/12227 In short: it looks like things like has_many.reject!{},

hello friends, You are right, changed the user to root, and icmpping and icmppingsec are working now!!! Thank you!!!! On 10/26/05, Fortin, Benoit <benoit.fortin@cgi.com> wrote: > > > Hi, > > The setuid of fping was already set, as you can see : > > zabbix@wirelessKTM:~/fping-2.4b2_to$ ls -l fping > -rwsr-xr-x 1 zabbix zabbix 69258 2005-10-26 17:59 fping >

Hi gents, I seem to have a small issue with fping and Observium(a monitoring solution). The particular VPS I'm using does have SELinux enabled and it seems to be causing issues when the httpd process is attempting to use Fping? Here is what I know so far : Output from "audit2why -a" : --------------- type=AVC msg=audit(1414265994.125:6744): avc: denied { create } for

I'm having some problems getting CentOS to serve up my Smokeping pages ( http://oss.oetiker.ch/smokeping/) However, I'm having problems getting the pages to serve up correctly. Here is a quick run down of what I've done. (1) wget and untar to /usr/local/smokeping (2) chown -R root:root /usr/local/smokeping (3) modifying to the following files to reflect my environment (not sure if

I have a specific question on how to do something, and a larger question addressing other "better" ways to do the spirit of what I'm asking. I'm setting up Nagios, and am trying to make sure that all of the subnets have A records, as IP addresses will be changing very, very rapidly, and when that day comes, I will not be here (but on another Nagios project). So, I'd like to

Chaps, First post so be gentle-I have a specific app I use for network testing called Fping http://www.kwakkelflap.com/fping.html. It all works in WIndows but I'm trying to make the cross-over into Linux and this is a tool I use on a daily basis, hence the need to make it work I did ask on the Ubuntu forums but got short shrift, being told I should use the built in PING tool-fair comment but

Hi all I can't find some program eg: fping rpm in centos 1/ How can I get this program install if yum won't find it? 2/ Can I use fedora12 fping rpm to install on it? Thank you

An very interesting test did yesterday that, LAN1 and LAN2 setup an tinc VPN which is quite simple(the physical link between tinc nodes are quite stable/fast), and no any application traffic to go through the tinc. Later, I setup smokeping which LAN1 initial 20 ping to LAN2 on a per-minute basis, but as you saw from the below picture, it had packet drop. But if I perform a constantly ping from

https://bugzilla.mindrot.org/show_bug.cgi?id=2462 Bug ID: 2462 Summary: Option to try connectiing to multiple DNS names Product: Portable OpenSSH Version: 6.9p1 Hardware: Other OS: Linux Status: NEW Severity: enhancement Priority: P5 Component: ssh Assignee: unassigned-bugs at

Hi! I am trying to use hping to chek the latency of our network. Somehow things are not going to plan and I thought someone might be able to shed some light on the subject. Here is the setup: (the IP addresses gvien here are fake, but they do represent the correct state of the networking setup) vlan interface IP mask V2 eth0 192.168.20.20 32

Hi, I'm using virt-viewer to launch remote desktop connections The connection to the KVM host is using ssh The virtual machines/guests are running a GNOME desktop I've observed some latency issues, for example, changing focus from one terminal to another is a bit sluggish. Typing isn't too bad. The WAN connection is gigabit fibre from my home into a local data center. Ping times

hello again, I got some just preliminary results .... hope someone can explain them to me... As I already told I have the following config : egress { class (30kbps) {sfq}; class (50kbps) {sfq}; class (80kbps) {sfq}; class (30kbps) {sfq}; class (50kbps) {sfq}; ...hundreds like this... class (10kbps,default) {sfq}; } What I got is traffic starvation very often for a period of ~30 sec.. as

Ps. Smb1 in Win10 ! I mean ofcourse.. Step 1: Go to Start button and type Control Panel. You will get Control Panel; Desktop app. Click on it. Step 2: You will get a window with a list of software on it, go to the left side of the panel and click Turn Windows Features On or Off. Step 3: You need to remove the checkmark beside SMB 1.0/CFs File Sharing Support to disable SMB1 for good. If you

I thought I'd chime in here a bit. I'm no RPi guru - but I've used them quite a lot for monitoring installs - stuff like Smokeping/Nagios/OMD/Cacti. They were cheap and seemed attractive low-power devices for client installs - back 5-6 years ago. I'm definitely using regular PC's now. Yes, the hardware is more expensive - but an Optiplex 7010 or the like off of ebay, with a

Hai, > -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens > Stephen Davies via samba > Verzonden: donderdag 25 april 2019 8:34 > Aan: samba at lists.samba.org > Onderwerp: Re: [Samba] User mapping/login issue > > > > It would appear that there may be more than one issue with my smb.conf. > The scenario is a Centos 7

I am trying to trouble shoot one of my ISP's network and compare to my other ISPs offering. Although network 1 is reasonably fast and has low enough latency, voice quality is not good and the reason for this is not readily apparent using standard network tools. What tools can be used to assess the quality of the network in terms of it's suitability for voice? I am using ping, mtr,

and you have added the following to the /etc/hosts 172.16.99.3 pdc.domain.co.id pdc and you did setup your krb5.conf in that way you point directly to the correct hosts without the use of a search like: [logging] default = FILE:/var/log/krb5libs.log kdc = FILE:/var/log/krb5kdc.log admin_server = FILE:/var/log/kadmind.log [libdefaults] default_realm = SMBDOM.EXAMPLE.COM dns_lookup_realm =

Hi debian jessie, nut 2.7.2-4 APC Smart-UPS 1500 connected through USB, running nut driver usbhid-ups This UPS powers my switches, internet connection and my monitor server that monitors this and my other UPSes + runs smokeping and nagios. But recently a powerloss seemed to have shutdown my monitor PC immediately, so it did not shut down the other servers cleanly. Power seem to be lost

Package: logcheck-database Version: 1.3.13 Severity: normal The rule for SSH ignoring "Bad protocol version identification" assumes there are no single quotes inside the version string ('[^']'). I am however getting mails including those lines: Mar 25 22:57:04 Debian-60-squeeze-64-minimal sshd[12144]: Bad protocol version identification