similar to: powerd not behaving with an Asus A8V-MX and Athlon 64 X2 3800+

I have a new system which includes a Plextor PX-740a DVD+-R/RW CD-R/RW drive attached to an Asus A8V-MX motherboard. When I try to use burncd to burn a cd, it writes all of the data, says "fixating CD, please wait.." and then reports burncd: ioctl(CDRIOCFIXATE): Input/output error Oddly enough, the CD seems to be usable. I can successfully burn the same file if I use cdrecord. The

Hi, I have some problems with usb da and uscanner giving me I/O-errors. This is on a ASRock K7VT2 board. If there is anything else I could do (testing patches, providing further info), please let me know. 4.8-STABLE from 04.08.2003: - MBO USB-MultiCardReader 6-in-1 mount_msdos => Input/output error - Epson Perfection 1260 Scanner scanimage --test => Error during device I/O

My new PC has an internal 16-in-1 card reader connected via USB 2.0. The device is the Techsolo TCR-1640 (http://www.techsolo.de/product/cardreader/tcr_1640/index.php). I boot from a compact flash inserted in it and I can mount and unmount the same CF once the system has booted and has mounted the root partition from my graid3 array. The problem arise when I replace the inserted CF with another

Skipped content of type multipart/mixed-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 187 bytes Desc: This is a digitally signed message part. Url : http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20080617/73afe727/attachment.pgp

Hello! FreeBSD tarkhil.titl.ru 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE #5: Tue Mar 14 14:58:53 MSK 2006 root@tarkhil.titl.ru:/usr/obj/usr/src/sys/ARMADA i386 encountered problems with USB-to-IDE box and NEC CD-RW/DVD drive. Controller /dev/usb3: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), NEC(0x0000), rev 1.00 port 1 powered port 2 addr 2: high speed, self powered,

Three different external hard drives (Seagate, Western Digital and noname USB 3.0 enclosure) refused to be recognized as the umass devices. Reverting /usr/src/sys/dev/bsd/controller to r248085, building and loading just xhci module makes drives appear again. Below are snippets from the log in both cases: Non working: Jul 4 14:35:17 twinhead kernel: xhci0: <XHCI (generic) USB 3.0

Have the following problems: MBO USB-MultiCardREader 6-in-1 does not read 128MB CF-Card. Oct 3 13:49:23 katrin /kernel: da0 at umass-sim0 bus 0 target 0 lun 0 Oct 3 13:49:23 katrin /kernel: da0: <ICSI IC1100 CF 2.5B> Removable Direct Access SCSI-0 device Oct 3 13:49:23 katrin /kernel: da0: 650KB/s transfers Oct 3 13:49:23 katrin /kernel: da0: Attempt to query device size failed:

I purchased the 256 MB A-DATA flash drive (USB 2.0 SpeedDrive), but the system can't query its size. Here is corresponding parts of system messages (boot -v): >>>>>>>>>>> Aug 5 12:53:57 goshik /kernel: Copyright (c) 1992-2003 The FreeBSD Project. Aug 5 12:53:57 goshik /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Aug 5

Hi! Just before we start, this is not the "USB hang on boot" problem. OK? This post got rather long, so I'll summaries it all in a sentence here: With FreeBSD 4.9-rc on an ASUS A7N8X with a cheapo memory stick, simply plugging it in and taking it out a couple of times is a guaranteed panic. I use only one USB device, a cheapo USB memory stick, which I recently bought on a

Hi Folks, I've facing an intermittent hang with a USB port which seems cam related: Event's that happen are: o USB modem (HUAWEI E220) plugged into PC ugen3.2: <HUA WEI> at usbus3 u3g0: <3G Modem> on usbus3 u3g0: Found 3 ports. umass0: <USB MASS STORAGE> on usbus3 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:6:0:-1: Attached to scbus6 umass1: <USB

Dear colleagues, I'm planning to debug usb connection with my new SONY CLIE handheld, and found that this process is much complicated by the fact usb.ko module can not be unloaded 'cause some process is referencing it: marck@revamp:~/tmp> kldstat -v -i 11 Id Refs Address Size Name 11 1 0xc0cf7000 1b000 usb.ko Contains modules: Id Name

I have an old Dell 1950 that I've rescued from Linux and tossed a copy of -STABLE on it, but am seeing a constant 0.5 load average. With the system completely idle, and kern.eventtimer.timer=LACPI, the load drops to the expected value of zero. This feels like it should be an FAQ, but short of noting that the load is non-zero, is there a programatic way to determine if the event timer is

Hi, I'm having lots of difficulties with BCM5719, which is the default network card of HP Proliant DL 360 G8 servers. I can get a few ping replies before I get a couple of these: bge0: watchdog timeout -- resetting bge0: watchdog timeout -- resetting Then everything hangs. Can not log in using ssh.

I have a motherboard here that reports USB controllers thusly in dmesg (5.4-stable): usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xf7002000-0xf7002fff irq 5 at device 3.1 on pci0 usb1:

Hello, I have 2 hosts HostA and HostB HostA - 10.38.9.2, kernel 2.4.16, tincd from Debian package HostB - 10.38.9.223, kernel 2.2.17-21mdk, tincd from tarball package. HostA: ------------------------------ /etc/tinc/test4/tinc.conf Name = HostA ConnectTo = HostB TapDevice = /dev/misc/net/tun PrivateKeyFile = /etc/tinc/test4/rsa_key.priv /etc/tinc/test4/hosts/HostA Subnet = 10.0.0.0/8 Port =

Hi there, I am experiencing an annoying but not critical issue with (I think) tinc's internal routing. My setup is this: HostA (local. ConnectTo = HostC) HostB (geographically close. ConnectTo = HostC) HostC (far away. ConnectTo = nothing) Without tinc, pings from HostA to HostB take around 10ms, and from HostA/B to HostC around 200ms. With tinc, pings from HostA to HostB take nearly

I am taisaki About how to carry out mirroring with both server Although I would like you to teach About rsync, although it is a question, this time hostA hostB It is related with ssh connection. authorized_keys is held on both sides. In the environment which can be used satisfactory hostA /export/Data The following directories hostB /export/temp a mirror is carried out to below --

Hello again :) Thank you all for your reply's. Below are the config files of the 3 hosts. I use  tinc in router mode. I do not have a kernel mode config lines anywhere so tinc must be using the default settings here. I added the ipaddressx to subnets on hostc and this works. Traffic to that ip is now routed via hostc. But since this ipaddressx address changes often I need to resolve it

Hi, We're encountering a rather weird, sporadic hang during a large-file transfer. A bit of background on the setup: - Host A rsyncs a MySQL database from Host B. Both sides use rsync 3.1.1 on Debian Jessie. - Host B serves the files using rsync --daemon from an ext4 filesystem residing on a thin LVM snapshot. - Host A uses the following command to rsync the files to a btrfs

On 11 April 2018 at 11:30, Hans de Groot <hansg at dandy.nl> wrote: > Hello again :) > > Thank you all for your reply's. Below are the config files of the 3 hosts. > I use tinc in router mode. I do not have a kernel mode config lines > anywhere so tinc must be using the default settings here. > > I added the ipaddressx to subnets on hostc and this works. Traffic