similar to: NVIDIA driver / internal modem irq conflict

Hi, I currently encounter spin lock 0xc0c83ba8 (sio) held by 0xc6337460 (tid 100005) too long panic: spin lock held too long cpuid=3 on hp server with two dual-core intel xeon (3.8GHz) and 3GB RAM. System is 7.1-PRELEASE last fetched 29.11.2008, 17:58 UTC. This happens with VSCom Card that was previously in use in a 5.3-STABLE system (also hp server, but older hardware) without problems. The

After updating my kernel from a 4.7-stable to 4.8-stable update, my SB PCI128 is no longer recognized by the pcm driver. Here is my dmesg: FreeBSD 4.8-STABLE #0: Thu Jul 17 14:13:52 CDT 2003 root@hautlos.stout.osu-res.okstate.edu:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: AMD Athlon(tm) Processor (800.03-MHz 686-class CPU) Origin =

Hello, I have the following hardware configuration. Tyan 2466N motherboard, 1.03 BIOS, 2 Athlon-MP 1800+ CPUs, 512MB registered ECC DRAM, Onboard 3Com NIC (xl type) Radeon 8500 AGP video card Adaptec 3210S SCSI RAID controller Comtrol RocketPort 8 port PCI serial card I have started to experience some odd system lockups in the past couple months, and it seems to be getting worse. I particular,

This morning, I upgraded my main system to an up-to-date -STABLE including acpi and it now hangs during shutdown after reporting: Waiting (max 60 seconds) for system process `vnlru' to stop...stopped If I set hw.acpi.disable_on_poweroff=0 then the shutdown completes but poweroff fails with (hand copied): ACPI-1287: ***Error: Method execution failed [\_PTS] (Node 0xc21ed450),

I'm trying to get stable booted on a little ITX board off of a CF card, but it hangs as it's trying to run init. Here's what the boot looks like. SMAP type=01 base=0000000000000000 len=000000000009fc00 SMAP type=01 base=000000000009fc00 len=0000000000000400 SMAP type=02 base=00000000000f0000 len=0000000000010000 SMAP type=02 base=00000000ffff0000 len=0000000000010000 SMAP type=01

I have some questions about what needs tuned on a high traffic syslog box. I seem to be dropping quite a few syslog packets. This is a syslog server for a high usage Firewall btw. Nic is a Compaq tl0 4.8-P13 netstat -s -p udp | grep buf 19,762,079 dropped due to full socket buffers uptime 5:28PM up 7 days, 18:30, 2 users, load averages: 0.21, 0.23, 0.23 I though maybe syslogd was the

I have same problem on same class machine, here is dmesg from failing boot (via serial console): -------------------- Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.8-RELEASE-p7 #0: Sat Sep 20 17:07:38 EEST 2003

Hi, Can someone please help me with this? I have just upgraded from 4.7 to 4.8-STABLE and this is what I am getting when I try a tape backup. Please CC as I am not in the list. It was working well before the upgrade (dump -0ua -f - / | gzip -c -9 | dd of=/dev/nsa0). Thank you, Lefteris Tsintjelis Jul 3 22:55:18 ene /kernel:

Hi, After kernel panic I couldn't get gdb work properly. msi$ uname -sr FreeBSD 4.7-RELEASE msi$ gdb -k /usr/src/sys/compile/MSINW/kernel.debug vmcore.0 GNU gdb 4.18 (FreeBSD) Copyright 1998 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show

Hi, I have some problems with usb da and uscanner giving me I/O-errors. This is on a ASRock K7VT2 board. If there is anything else I could do (testing patches, providing further info), please let me know. 4.8-STABLE from 04.08.2003: - MBO USB-MultiCardReader 6-in-1 mount_msdos => Input/output error - Epson Perfection 1260 Scanner scanimage --test => Error during device I/O

Dear collagues, could someone sched me a light about the following crash (I'm almost sure about hardware, temperature, etc...) Machine is fairly stable; however, there are occational crashes, similar to this one; backtraces are almost always single-step. It's 4.8-R, dmesg and gdb -k output follows ====================================================================================

Hi all, is there a known issue with health monitoring on supermicro SuperServer 6010H? (Im primarily interested in temeperature monitoring) I have tried both mbmon and lmmon with the following results: stats# mbmon -d SMBus[ServerWorks(ServerSet Chipset)] found, but No HWM available on it!! No Hardware Monitor found!! InitMBInfo: Unknown error: 0 stats# lmmon IOCTL: Operation not supported by

Hi, I have Orinoco 802.11b PC Card from Proxim. I plugged it to pcmcia slot, but It doesn't work - no blinking LEDs, no wi0 in ifconfig. I have 7.1-PRERELEASE, laptop Prestigio Nobile 157. On NetBSD seems working, but NetBSD is not friendly with me. if_wi driver included in kernel. ----- dmesg Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,

Hi. I've recently borrowed a SuperMicro 6013P-8 from a vendor for the purposes of testing it to see if FreeBSD and these machines will make a good replacements for our current flock of 11 Netra T1s running solaris. Things are going very well with the tests, with the glaring exception of the following crash: While doing some significant disk operations: du, deleting a different part of the

Hi, We did an upgrade of one of our machines from an Aug 25 CVS and ever since then one of the machines likes to reboot about once a day. The machine is the following: IBM x340 2x1GHZ Processors 1GB RAM 3x36GB Drives (RAID 5) Mylex ExtreRAID 352 In the panic it mentions httpd, but I don't *think* it's apache (1.3.27) that's causing the problem, or am I wrong? I also believe it is

I am getting these messages every 30 seconds or so. I searched around and found a few other post about this problem with other devices, but no answers to the problem. I didn't notice any of these message until I upgrade to 4.8-RELEASE the other day. This is a dual processor machine. It happens on all my machines that have em devices, which all happen to be dual processor machines. I

-- Previously Posted to FreeBSD-questions Update: I've changed the RAM in the machine. That seemed to fix the problem for a little bit, but the problem has started occuring again. Also, I'm not subscribed to the list, so please reply to this message directly. Thanks for all your help. -- Hello, Recently, I've been having kernel panics on 4.8RC. This made me upgrade to

Hello, My server is experiencing occasional kernel panics when under moderate load. I'm attaching a crash dump and the dmesg output. I'm not sure how to read the kernel backtrace but it looks like the Intel NIC (em0) caused the problem. Occasionally, I used to get a "em0: watchdog timeout -- resetting" error message, but I never had a kernel panic. The problem started last

Hi, I have a problem, probably with the SiI 3512 SATA150 controller in a dual-Opteron IBM eServer 326: Every once a while the kernel issues a message like: ad4: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA=150190687 The system waits a few seconds and continues to work normally. It typically occurs several times a day most likely depending on the load of the (SATA connected) hard drive.

Good morning, I'm having a bit of an issue getting a 3CR990B-TXM NIC detected and usable. Just wondering if anyone knows of any issues with this NIC chipset and/or with the motherboard chipset. The motherboard is a Biostar GeForce 6100 AM2 using an nVidia nForce 410 chipset and nVidia GeForce 6100 vide chipset. I've tried FreeBSD 6.1, 6.2, 6-STABLE (from Wed), and 7-CURRENT (from