similar to: FOUND_THE_ISSUE -- URGENT -- pseudo network interface creating problem with dhcp-- centos 5.5

We have recently been asked to evaluate some computing machinery for a new project. This particular end user has very limited experience with the stated security requirements in a lights-out environment. Their primary work (as well as mine) in the past has been with very small, simple networks of desktop machines and a few servers with extremely limited access.? For the most part, their admins

Well, we're figure the board's got problems, but I installed OpenIPMI a couple weeks ago, and fired it up as a service, then added a cron job. That all ran well until last evening; we came in to find 5 zillion emails complaining Unable to open SDR for reading I worked my way through logs, and googling, and then trying to run ipmitool by hand, and it complains there's no such device as

On Thu, Jul 12, 2018 at 07:27:58PM -0500, Chris Adams wrote: > > Default Gateway IP : 192.168.0.100 > > Default Gateway MAC : 00:25:90:0a:42:87 > > No, that does not look right. You have configured the gateway of the > IPMI to be the host OS side of the NIC. You can't do that... in a lot > of systems I've seen, the IPMI side of the NIC can't even

Greetings all, I am looking for a solution to use IPMI (BMC) in with LibVirt (Virt-Manager). Actually there is a Customer behind this request as well. Trying to be short: We are looking for a Solution in OpenStack Environment. Customer wants to have the entire environment running in Virt-Manager (probably for a P.O.C or tests purposes). So here is what he is trying to do: http://red.ht/1HfNn9r

Date: Wed, 27 Jun 2018 20:45:44 -0400 From: Jonathan Billings <billings at negate.org> > On Wed, Jun 27, 2018 at 05:14:06PM -0400, mark wrote: > >> I do see one option of "defgw macaddr" - is that supposed to be a MAC >> external to the server, or can I use the MAC of eth1 (or whatever the >> stupid, unrememberable name is)? > > As mentioned earlier,

Hi, I hope somebody can help me with this problem. I don't know whether it's a problem with my configuration or a bug or feature in extlinux. I am using an IPMI 2.0 serial-over-lan console to connect to a system with an Intel S3200SHL motherboard. The first line of my extlinux.conf file looks like this: serial 0 57600 0x003 I am using ipmitool to access the console, like so:

Hi, Thanks for your help. On Mon, Nov 11, 2013 at 08:00:47PM -0800, H. Peter Anvin wrote: > There is no reason by Syslinux would reboot the system on a serial > disconnect. There could be a bug, of course; now, Syslinux 4.05 is > pretty old so unless you can reproduce this on a current version that > would be useful. I am using 4.05 because that's what's packaged in the

Jon Pruente wrote: > On Tue, Jun 26, 2018 at 3:16 PM, mark <m.roth at 5-cent.us> wrote: > >> The man page isn't helping, nor have I been able to find examples that >> work. >> >> For example, the man page claims I can do ipmitool lan get active, and >> I try, and it says, "invalid lan command, get". > > get isn't a recognized

Dear folks, We are installing a large diskless cluster using CentOS 5.1. The hardware is pretty new - Supermicro X7DWT boards with Harpertown CPUs. Unfortunately we have some PXE-related problems described by the following scenario: 1) Set up DHCP, TFTP and NFS on a server, prepare PXE kernel and initrd - fine. 2) Start up the node using PXE for the first time - fine. 3) Reboot the node - PXE

My environment is "heterogeneous" my authentication and home server are currently stuck on a 1G shared network, the production servers and storage servers are on a bonded 40G network, all are in the same VLAN. I have about 100 servers on the 40GB bonded network each with 12cores and 128GB of memory. They are running centos 6.6 Except for my storage servers they are all just running

Hello! I'm trying to install Centos 6.4 64 bit on this Xserve: http://www.everymac.com/systems/apple/xserve/specs/xserve-intel-xeon-2.8-eight-core-specs.html I got a bootloader from: http://blog.christophersmart.com/2009/07/23/linux-on-an-apple-xserve-efi-only-machine/ as none of the official Centos releases (full, minimal, network 64 bit) boot on this machine. They all crash when loading

Hi all, I am trying to load kernel module ipmi_si, while failed with error "No such device", truth is I can find file in ../kernel/drivers/char/ipmi/ipmi_si.ko. So why I can't load it? Steps: # ls -l /lib/modules/2.6.32-573.el6.x86_64/kernel/drivers/char/ipmi/ipmi_si.ko -rwxr--r--. 1 root root 93080 Jul 23 2015

Hi Everyone, I have a dell 1750 server with ERA/O card running on FreeBSD 7.0-STABLE According to Dell, the ERA card supports ipmi 1.0: http://linux.dell.com/ipmi.shtml But so far no luck with freebsd :/ [root@home /usr/src/sys/i386/conf]# ipmitool -I open channel info 1 Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or directory

John R Pierce wrote: > On 2/22/2017 1:32 PM, m.roth at 5-cent.us wrote: >> 1. the server was working fine before we moved it out of the datacenter >> yesterday afternoon. > > old hardware often doesn't survive moves, or even power/thermal cycles > (powering off long enough to get cold, then back on). > I know, and I'm afraid of that. Still, the googling

Good morning! On a CentOS 6.4 / 64 bit server I have installed the watchdog 5.5 package. The rpm -qi watchdog states: The watchdog program can be used as a powerful software watchdog daemon or may be alternately used with a hardware watchdog device such as the IPMI hardware watchdog driver interface to a resident Baseboard Management Controller (BMC). ... This configuration file is also used to

> Date: Tue, 26 Jun 2018 16:50:55 -0500 > From: Jon Pruente <jpruente at riskanalytics.com> > > On Tue, Jun 26, 2018 at 4:10 PM, mark <m.roth at 5-cent.us> wrote: >> So you're saying I should set the MAC address for the lan channel 1 to >> the MAC address of the second NIC? > > No, you don't do anything to the MAC addresses on the BMC/IPMI. They

Is there a little setup display right on the box? Just asking because I have seen that on some boxes. Cheers, Boris. On Sun, Sep 18, 2016 at 12:15 AM, Keith Keller < kkeller at wombat.san-francisco.ca.us> wrote: > On 2016-09-17, Alice Wonder <alice at domblogger.net> wrote: > > > > Okay if it requires DHCP this might be out, I'm currently out of town > >

Hallo *! I have a board SE7501HG2. - On 2.6.18 ipmitool works succefull. On Xen-3.1 (2.6.18) ipmitool say: # ipmitool sensor WARNING: Unknown SDR repository version 0x00 SDR record id 0x0000: invalid length 0 (see thread [ipmitool-devel] Unknown SDR version) - On page [4] as written: ipmitool -> BMC ---> i2c/smbus ''-> SDR - On Thread [9] was written:

I''m trying to get ceph working with decent performance (currently getting kb/second write performance!) and it seems that maybe the Debian wheezy kernel is just a bit too ancient. The 3.8 kernel from experimental works on bare metal, but when booting as dom0 under the xen hypervisor it crashes. I just figured out how to redirect xen output to my IPMI/BMC serial port and I see this:

I think I know the answer to this question based on all of the research I've done, but figured I'd ask anyway. I needed a couple of servers for an HA cluster, and our "order" guy here ordered me a couple of Dell PowerEdge T110 II. I'd planned on using IPMI to fence these things with, but later found out that this model is only one of two PE servers Dell sells that has a